Selective cationic dye sorption in water by a two-dimensional zinc-carboxylate coordination polymer and its melamine-formaldehyde foam composite

Preparation of pH-sensitive composite polyethersulfone membranes embedded by Ag(I) coordination polymer for the removal of cationic and anionic dyes

A pH-sensitive polyethersulfone (PES) membrane was prepared with the aid of newly synthesized Ag(I) coordination polymer (Ag(I)-CP) particles. Indicating obvious adsorptive property toward dyes, the Ag(I)-based metalorganic framework (MOF) was selected to be used as an additive to improve the dye selectivity of PES membranes for both cationic and anionic dyes. The performance examination and characterization of prepared membranes indicated the influence of Ag(I)-CP in PES membrane improvement. The effect of feed pH approved the membrane response to pH changes in dye removal results. By adjusting feed pH based on pHpzc of Ag(I)-CP, it is possible to remove both anionic and cationic dyes (97% of acid orange 7 (AO) & and 100% of methylene blue (MB)) from the effluent along with an enhanced permeated flux. The results offered a synergism in embedding Ag(I)-CP in PES membrane in dye removal efficiency. The additive particles can be applied with their natural size (200-300 nm) without severe influence on the uniformity of the membrane morphology if the optimum Ag(I)-CP content is considered.

Design of a Sensitive Fluorescent Zn-Based Metal-Organic Framework Sensor for Cimetidine Monitoring in Biological and Pharmaceutical Samples

A new highly fluorescent zinc-organic framework [Zn₂(btca)(DMSO)₂]_n (Zn-MOF) was prepared via in situ ligand formation by the solvothermal reaction of Zn(NO₃)₂·6H₂O and pyromellitic dianhydride (PMDA) in DMSO solvent. During the solvothermal reaction, PMDA was gradually hydrolyzed to a pyromellitic acid, 1,2,4,5-benzene tetracarboxylic acid (H₄btca), to provide a tetracarboxylic acid as a linker in the reaction medium. Single-crystal X-ray diffraction analysis exhibits a 3D porous structure with open tetragonal channels running along the crystallographic c-axis. The Zn-MOF was explored as an on-mode fluorescent sensor for tracing cimetidine in biological fluids and pharmaceutical samples in the presence of interfering species. The results show a quick response in a short time range. The characteristics of this sensor were investigated by field-emission scanning electron microscopy, dynamic light scattering, energy-dispersive X-ray analysis, powder X-ray diffraction, Fourier transform infrared and UV-vis spectroscopy as well as thermogravimetric, and elemental analyses.

Polydopamine-assisted polyethylenimine grafting melamine foam and the application in wastewater purification

Melamine foam (MF) is a widely used commercial product and exhibits wide applications in many fields ranging from building, transportation to daily chemical product. Recent researches confirm that the special three-dimensional (3D) framework structure of MF can be an ideal substrate to prepare functional materials. In this work, the water-soluble polyethylenimine (PEI) was grafted onto the framework of MF to develop the water purification material toward heavy metal ions removal. The grafting of PEI on MF was achieved with the aids of polydopamine (PDA) coating and epoxy chloropropane (ECH) cross-linking successively. The 3D framework of MF could be well reserved and PEI was homogeneously grafted onto the framework surface. The adsorption capacity of the adsorbent was dependent upon the molecular wight of PEI. Lower PEI molecular weight endowed the adsorbent with better adsorption ability. The maximum adsorption capacity reached 328.95 mg/g, and the adsorbent exhibited extremely high adsorption stability with increasing cycling measurement numbers. Further results showed that the adsorbent also exhibited high reduction ability and induced about 62.5% toxic Cr(VI) to be reduced. This work confirms that the PEI-modified MF sample is a promising adsorbent in the removal of heavy metal ions and it can be used in wastewater treatment.