Construction of Ag decorated on InVO4/g-C3N4 for novel photocatalytic degradation of residual antibiotics

Simultaneous S-scheme promoted Ag@AgVO3/g-C3N4/CeVO4 heterojunction with enhanced charge separation and photo redox ability towards solar photocatalysis

Photocatalytic removal of toxic contaminants is one of the emerging techniques for water remediation, but it suffers from low redox ability, charge recombination and poor light harvesting efficiency. The present work reports a simultaneous S-scheme promoted by CeVO₄/g-C₃N₄/Ag@AgVO₃. The formation of the S-scheme mechanism enhanced the generation of photogenerated carriers and also improved the redox ability of the electrons and holes in the reduction and oxidation photocatalysts. The ternary demonstrated remarkable photo switching properties along with efficient charge separation which was achieved through dual interfacial interaction within the ternary (Ag@AgVO₃/g-C₃N₄ and CeVO₄/g-C₃N₄). The heterojunction formation was verified through the shift in binding energy spectra in the X-ray Photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy analysis (HR-TEM). The ternary demonstrated reduced PL intensity, width of space charge region and an upsurge in photogenerated current density in the order of 93 μA/cm2 (∼6X higher than all the pristine). This resulted in efficient removal of methyl orange, methylene blue and endocrine disruptive bisphenol-A with a removal rate of 0.02 min^-1, 0.03 min^-1 and 0.0087 min^-1 and an apparent quantum yield of 4.6 × 10^-9 (Methylene Orange), 6.89 × 10^-9 (Methylene Blue) and 2 × 10^-9 (Bisphenol A/H₂O₂).

Simultaneous decolorization of anionic and cationic dyes by 3D metal-free easily separable visible light active photocatalyst

To overcome the hard and costly post-treatment separation of ultrathin graphitic carbon nitride nanosheets (UGCN), it was supported on polyurethane foam (PUF). The ratio of PUF/UGCN was optimized for the removal of a mixture of methylene blue (MB) and methyl orange (MO) dyes. The characteristics of the composite photocatalyst and its photocatalytic performance were detailly studied. The X-ray diffraction and Fourier transform infrared results proved the successful preparation of UGCN and PUF and that the PUF/UGCN composite combines the features of both pure materials. The transmission electron microscopy illustrated the ultrathin nanosheet shape of the UGCN, while the scanning electron microscope showed the highly porous 3D-hierarchical structure of PUF. Compared to the pure components, the composite photocatalyst with PUF/UGCN mass ratio of 4 achieved better decolorization of MO and almost same decolorization of MB as UGCN. Neutral pH and 1 g/L of the composite photocatalyst were the optimum conditions for MB/MO mixture decolorization. The composite photocatalyst kept its efficiency for five successive cycles. Hydroxyl radicals were the dominant in the degradation of MB, while superoxide radicals were the most influencer in MO degradation. Conclusively, supporting UGCN onto PUF kept the photocatalytic efficiency of UGCN toward MB decolorization and improved its efficiency toward MO. Moreover, it enabled the reuse of the composite photocatalyst and facilitated the post-treatment separation process.

Removal of tetracycline from wastewater using g-C3N4 based photocatalysts: A review

Tetracycline is currently one of the most consumed antibiotics for human therapy, veterinary purpose, and agricultural activities. Tetracycline worldwide consumption is expected to rise by about more than 30% by 2030. The persistence of tetracycline has necessitated implementing and adopting strategies to protect aquatic systems and the environment from noxious pollutants. Here, graphitic carbon nitride-based photocatalytic technology is considered because of higher visible light photocatalytic activity, low cost, and non-toxicity. Thus, this review highlights the recent progress in the photocatalytic degradation of tetracycline using g-C₃N₄-based photocatalysts. Additionally, properties, worldwide consumption, occurrence, and environmental impacts of tetracycline are comprehensively addressed. Studies proved the occurrence of tetracycline in all water matrices across the world with a maximum concentration of 54 μg/L. Among different g-C₃N₄-based materials, heterojunctions exhibited the maximum photocatalytic degradation of 100% with the reusability of 5 cycles. The photocatalytic membranes are found to be feasible due to easiness in recovery and better reusability. Limitations of g-C₃N₄-based wastewater treatment technology and efficient solutions are also emphasized in detail.

Facile synthesizing Z-scheme Bi12O15Cl6/InVO4 heterojunction to effectively degrade pollutants and antibacterial under light-emitting diode light

The design of a photocatalytic system with Z-scheme heterojunction is the key to charge separation. In this paper, a simple synthesis method was used to prepare Bi₁₂O₁₅Cl₆/InVO₄ photocatalyst. The synthesized photocatalyst can effectively degrade pollutants, and inactivate bacteria under LED light irradiation. The optimal ratio of 30% Bi₁₂O₁₅Cl₆/InVO₄ material effectively degraded 78.85% of TC and 97.83% of RhB within 90 min and inactivated Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in 40 min. This improvement in photocatalytic performance is mainly due to the formation of a Z-scheme heterojunction between Bi₁₂O₁₅Cl₆ and InVO₄, which produces effective charge separation and improves photocatalytic degradation and antibacterial activity. The capture experiment revealed the main active substances. The effects of catalyst dosage and pollutant concentration were investigated in details. The intermediates of TC degradation were identified by mass spectrometry (MS), and the possible photocatalytic degradation pathway was proposed. Capture experiment and related measurements proposed the Z-scheme mechanism. This work emphasizes the importance of heterogeneous structure construction and proposes feasible solutions for the rational design of catalysts with photodegradation and antibacterial properties under LED light.