Non-tight and tight chemomechanical couplings of biomolecular motors under hindering loads

A model of microtubule depolymerization by kinesin-8 motor proteins

The dimeric kinesin-8 motors have the biological function of depolymerizing microtubules (MTs) from the plus end. However, the molecular mechanism of the depolymerization promoted by the kinesin-8 motors is still undetermined. Here, a model is proposed for the MT depolymerization by the kinesin-8 motors. Based on the model, the dynamics of depolymerization in the presence of the single motor at the MT plus end under no load and under load on the motor is studied theoretically. The dynamics of depolymerization in the presence of multiple motors at the MT plus end is also analyzed. The theoretical results explain well the available experimental data. The studies can also be applicable to other families of kinesin motors such as kinesin-13 mitotic centromere-associated kinesin motors that have the ability to depolymerize MTs.

FOF1-ATP synthase molecular motor biosensor for miRNA detection of colon cancer

AIMS

To establish a F_OF1-ATP synthase molecular motor biosensor to accurately identify colon cancer miRNAs.

MAIN METHODS

The F_OF1-ATP synthase molecular motor is extracted by fragmentation-centrifugation and connected to the colon cancer-specific miR-17 capture probe in the manner of the ε subunit-biotin-streptavidin-biotin system. Signal probes are designed for dual-signal characterization to increase detection accuracy. The F_OF1-ATPase rotation rate decreases when the signaling and capture probes are combined with the target miRNA, resulting in a decrease in ATP synthesis. miR-17 concentrations are determined by changes in ATP-mediated chemiluminescence intensity and signal probe-mediated OD_450nm.

KEY FINDINGS

The chemiluminescence intensity and OD_450nm show a good linear relationship with the miR-17 concentration in the range of 5 to 200 nmol L^-1 (R² = 0.9985, 0.9989). The colon cancer mouse model is established for the blood samples, and miR-17 in serum and RNA extracts is quantitatively determined using the constructed sensor.

SIGNIFICANCE

The results are consistent with colon cancer progression, and the low concentration of miR-17 detecting accuracy is comparable to the PCR assay. In conclusion, the developed method is a direct, rapid, and promising method for miRNA detection of colon cancer.

Effect of the Neck Linker on Processive Stepping of Kinesin Motor

Kinesin motor protein, which is composed of two catalytic domains connected together by a long coiled-coil stalk via two flexible neck linkers (NLs), can step processively on a microtubule towards the plus end by hydrolyzing adenosine triphosphate (ATP) molecules. To understand what the role is that the NL plays in the processive stepping, the dynamics of the kinesin motor are studied theoretically here by considering the mutation or deletion of an N-terminal cover strand that contributes to the docking of the NL in kinesin-1, the extension of the NL in kinesin-1, the mutation of the NL in kinesin-1, the swapping of the NL of kinesin-2 with that of kinesin-1, the joining of the stalk and neck of Ncd that moves towards the minus end of MT to the catalytic domain of kinesin-1, the replacement of catalytic domain of kinesin-1 with that of Ncd, and so on. The theoretical results give a consistent and quantitative explanation of various available experimental results about the effects of these mutations on motor dynamics and, moreover, provide predicted results. Additionally, the processive motility of kinesin-6 MKLP2 without NL docking is also explained. The available experimental data about the effect of NL mutations on the dynamics of the bi-directional kinesin-5 Cin8 are also explained. The studies are critically implicative to the mechanism of the stepping of the kinesin motor.

Dynamics of kinesin motor proteins under longitudinal and sideways loads

The available single-molecule data showed that different species of N-terminal kinesin molecular motors have very different features on dependences of run length and dissociation rate upon longitudinal load acting on stalks of the motors. The prior single-molecule data for Loligo pealei kinesin-1 indicated that the sideways load has only a weak effect on the velocity, but even a small sideways load can cause a large reduction in the run length. However, these puzzling experimental data remain to be explained and the underlying physical mechanisms are unclear. Here, based on our proposed model we study analytically the dynamics of the N-terminal kinesin motors such as Loligo pealei kinesin-1, Drosophila kinesin-1, truncated kinesin-5/Eg5, truncated kinesin-12/Kif15, kinesin-2/Kif17 and kinesin-2/Kif3AB dimers under both longitudinal and sideways loads. The theoretical results explain quantitatively the available experimental data and provide predictions. The physical mechanism of different kinesin species showing very different features on the load-dependent dynamics and the physical mechanism of the effect of the sideways load on the dynamics are revealed.

Modeling processive motion of kinesin-13 MCAK and kinesin-14 Cik1-Kar3 molecular motors

Kinesin-13 MCAK, which is composed of two identical motor domains, can undergo unbiased one-dimensional diffusion on microtubules. Kinesin-14 Cik1-Kar3, which is composed of a Kar3 motor domain and a Cik1 motor homology domain with no ATPase activity, can move processively toward the minus end of microtubules. Here, we present a model for the diffusion of MCAK homodimer and a model for the processive motion of Cik1-Kar3 heterodimer. Although the two dimeric motors show different domain composition, in the models it is proposed that the two motors use the similar physical mechanism to move processively. With the models, the dynamics of the two dimers is studied analytically. The theoretical results for MCAK reproduce quantitatively the available experimental data about diffusion constant and lifetime of the motor bound to microtubule in different nucleotide states. The theoretical results for Cik1-Kar3 reproduce quantitatively the available experimental data about load dependence of velocity and explain consistently the available experimental data about effects of the exchange and mutation of the motor homology domain on the velocity of the heterodimer. Moreover, predicted results for other aspects of the dynamics of the two dimers are provided.

Effect of Kinesin-5 Tail Domain on Motor Dynamics for Antiparallel Microtubule Sliding

Kinesin-5 motor consists of two pairs of heads and tail domains, which are situated at the opposite ends of a common stalk. The two pairs of heads can bind to two antiparallel microtubules (MTs) and move on the two MTs independently towards the plus ends, sliding apart the two MTs, which is responsible for chromosome segregation during mitosis. Prior experimental data showed that the tails of kinesin-5 Eg5 can modulate the dynamics of single motors and are critical for multiple motors to generate high steady forces to slide apart two antiparallel MTs. To understand the molecular mechanism of the tails modulating the ability of Eg5 motors, based on our proposed model the dynamics of the single Eg5 with the tails and that without the tails moving on single MTs is studied analytically and compared. Furthermore, the dynamics of antiparallel MT sliding by multiple Eg5 motors with the tails and that without the tails is studied numerically and compared. Both the analytical results for single motors and the numerical results for multiple motors are consistent with the available experimental data.

A model of processive walking and slipping of kinesin-8 molecular motors

Kinesin-8 molecular motor can move with superprocessivity on microtubules towards the plus end by hydrolyzing ATP molecules, depolymerizing microtubules. The available single molecule data for yeast kinesin-8 (Kip3) motor showed that its superprocessive movement is frequently interrupted by brief stick-slip motion. Here, a model is presented for the chemomechanical coupling of the kinesin-8 motor. On the basis of the model, the dynamics of Kip3 motor is studied analytically. The analytical results reproduce quantitatively the available single molecule data on velocity without including the slip and that with including the slip versus external load at saturating ATP as well as slipping velocity versus external load at saturating ADP and no ATP. Predicted results on load dependence of stepping ratio at saturating ATP and load dependence of velocity at non-saturating ATP are provided. Similarities and differences between dynamics of kinesin-8 and that of kinesin-1 are discussed.

A common ATP-dependent stepping model for kinesin-5 and kinesin-1: Mechanism of bi-directionality of kinesin-5

Kinesin-5 and kinesin-1 proteins are two families of kinesin superfamily molecular motors that can move processively on microtubules powered by ATP hydrolysis. Kinesin-1 is a unidirectional motor. By contrast, some yeast kinesin-5 motors are bidirectional and the directionality can be switched by changing the experimental conditions. Here, on the basis of a common chemomechanical coupling model, the dynamics of kinesin-1 and in particular the dynamics of kinesin-5 is studied theoretically, explaining the available experimental data. For example, the experimental data about different movement directions under different experimental conditions for kinesin-5 are explained well. The origin of why kinesin-1 can only make unidirectional movement and kinesin-5 can make bidirectional movements is revealed. The origin of mutations or deletions of several structural elements affecting the directionality of kinesin-5 is revealed. Moreover, some predicted results for kinesin-5 are provided.

A common chemomechanical coupling model for orphan and conventional kinesin molecular motors

Orphan and conventional kinesin dimers represent two families of the kinesin superfamily molecular motors. Conventional kinesin, having a 14-residue neck linker (NL) in each head, can step processively on microtubule (MT), with an ATP hydrolysis being coupled with a mechanical stepping under no load. Orphan kinesin phragmoplast-associated kinesin-related protein 2 (PAKRP2) dimer, despite having a NL of 32 residues in each head, can also step processively on MT and exhibits tight chemomechanical coupling under no load. However, the dynamic properties of the wild type PAKRP2 and the mutant one with each NL truncated to 14 residues are very different from those of the wild type conventional kinesin and the mutant one with each NL being replaced by the 32-residue NL from PAKRP2. Here, based on a common chemomechanical coupling model we study computationally the dynamics of the two families of the kinesin dimers, with the simulated results explaining quantitatively the available experimental data. The large differences in the dynamics between the two families of kinesin dimers arise mainly from different rate constants of NL docking and ATPase activity and different weak affinities of the head in ADP state for MT. The studies indicate that both the orphan kinesin PAKRP2 and conventional kinesin use the same mechanism for processive motility.