Titanium-enriched medium drives low profile of ECM remodeling as a pre-requisite to pre-osteoblast viability and proliferative phenotype

Combination of in silico and cell culture strategies to predict biomaterial performance: Effects of sintering temperature on the biological properties of hydroxyapatite

Advances in methodologies to evaluate biomaterials brought an explosive growth of data, ensuing computational challenges to better analyzing them and allowing for high-throughput profiling of biological systems cost-efficiently. In this sense, we have applied bioinformatics tools to better understand the biological effect of different sintering temperatures of hydroxyapatite (abbreviated HA; at 1100, 1150, and 1250°C) on osteoblast performance. To do, we have better analyzed an earlier deposited study, in which the access code is E-MTAB-7219, which the authors have explored different in silico tools on this purpose. In this study, differential gene expression analyses were performed using the gene set variation analysis (GSVA) algorithm from the transcriptomes respecting the thermal changes of HA, which were validated using exclusively in vitro strategies. Furthermore, in silico approaches elected biomarkers during cell behavior in response to different sintering temperatures of HA, and it was further validated using cell culture and qPCR technologies. Altogether, the combination of those strategies shows the capacity of sintered HA at 1250°C to present a better performance in organizing an adequate microenvironment favoring bone regeneration, angiogenesis and material resorption stimulus once it has promoted higher involvement of genes such as CDK2, CDK4 (biomarkers of cell proliferation), p15, Osterix gene (related with osteogenic differentiation), RANKL (related with osteoclastogenesis), VEGF gene (related with angiogenesis), and HIF1α (related with hypoxia microenvironment). Altogether, the combination of in silico and cell culture strategies shows the capacity of sintered HA at 1250°C in guaranteeing osteoblast differentiation and it can be related in organizing an adequate microenvironment favoring bone regeneration, angiogenesis, and material resorption stimulus.

Mechanosignaling-related angiocrine factors drive osteoblastic phenotype in response to zirconia

BACKGROUND

The growing use of zirconia as a ceramic material in dentistry is attributed to its biocompatibility, mechanical properties, esthetic appearance, and reduced bacterial adhesion. These favorable properties make ceramic materials a viable alternative to commonly used titanium alloys. Mimicking the physiological properties of blood flow, particularly the mechanosignaling in endothelial cells (ECs), is crucial for enhancing our understanding of their role in the response to zirconia exposure.

METHODS

In this study, EC cultures were subjected to shear stress while being exposed to zirconia for up to 3 days. The conditioned medium obtained from these cultures was then used to expose osteoblasts for a duration of 7 days. To investigate the effects of zirconia on osteoblasts, we examined the expression of genes associated with osteoblast differentiation, including Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Additionally, we assessed the impact of mechanosignaling-related angiocrine factors on extracellular matrix (ECM) remodeling by measuring the activities of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) during the acquisition of the osteogenic phenotype, which precedes mineralization.

RESULTS

Our data revealed that mechanosignaling-related angiocrine factors play a crucial role in promoting an osteoblastic phenotype in response to zirconia exposure. Specifically, exposed osteoblasts exhibited significantly higher expression levels of genes associated with osteoblast differentiation, such as Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Furthermore, the activities of MMP2 and MMP9, which are involved in ECM remodeling, were modulated by mechanosignaling-related angiocrine factors. This modulation is likely an initial event preceding the mineralization phase.

CONCLUSION

Based on our findings, we propose that mechanosignaling drives the release of angiocrine factors capable of modulating the osteogenic phenotype at the biointerface with zirconia. This process creates a microenvironment that promotes wound healing and osseointegration. Moreover, these results highlight the importance of considering the mechanosignaling of endothelial cells in the modulation of bone healing and osseointegration in the context of blood vessel effects. Our data provide new insights and open avenues for further investigation into the influence of mechanosignaling on bone healing and the osseointegration of dental devices.

The Action of Angiocrine Molecules Sourced from Mechanotransduction-Related Endothelial Cell Partially Explain the Successful of Titanium in Osseointegration

Since Branemark's findings, titanium-based alloys have been widely used in implantology. However, their success in dental implants is not known when considering the heterogenicity of housing cells surrounding the peri-implant microenvironment. Additionally, they are expected to recapitulate the physiological coupling between endothelial cells and osteoblasts during appositional bone growth during osseointegration. To investigate whether this crosstalk was happening in this context, we considered the mechanotransduction-related endothelial cell signaling underlying laminar shear stress (up to 3 days), and this angiocrine factor-enriched medium was harvested further to use exposing pre-osteoblasts (pOb) for up to 7 days in vitro. Two titanium surfaces were considered, as follows: double acid etching treatment (w_DAE) and machined surfaces (wo_DAE). These surfaces were used to conditionate the cell culture medium as recommended by ISO10993-5:2016, and this titanium-enriched medium was later used to expose ECs. First, our data showed that there is a difference between the surfaces in releasing Ti molecules to the medium, providing very dynamic surfaces, where the w_DAE was around 25% higher (4 ng/mL) in comparison to the wo_DAE (3 ng/mL). Importantly, the ECs took up some of this titanium content for up to 3 days in culture. However, when this conditioned medium was used to expose pOb for up to 7 days, considering the angiocrine factors released from ECs, the concentration of Ti was lesser than previously reported, reaching around 1 ng/mL and 2 ng/mL, respectively. Thereafter, pOb exposed to this angiocrine factor-enriched medium presented a significant difference when considering the mechanosignaling subjected to the ECs. Shear-stressed ECs showed adequate crosstalk with osteoblasts, stimulating the higher expression of the Runx2 gene and driving higher expressions of Alkaline phosphatase (ALP), bone sialoprotein (BSP), and osteocalcin. Mechanotransduction-related endothelial cell signaling as a source of angiocrine molecules also stimulated the higher expression of the Col3A1 gene in osteoblasts, which suggests it is a relevant protagonist during trabecular bone growth. In fact, we investigated ECM remodeling by first evaluating the expression of genes related to it, and our data showed a higher expression of matrix metalloproteinase (MMP) 2 and MMP9 in response to mechanosignaling-based angiocrine molecules, independent of considering w_DAE or the wo_DAE, and this profile reflected on the MMP2 and MMP9 activities evaluated via gelatin-based zymography. Complimentarily, the ECM remodeling seemed to be a very regulated mechanism in mature osteoblasts during the mineralization process once both TIMP metallopeptidase inhibitor 1 and 2 (TIMP1 and TIMP2, respectively) genes were significantly higher in response to mechanotransduction-related endothelial cell signaling as a source of angiocrine molecules. Altogether, our data show the relevance of mechanosignaling in favoring ECs' release of bioactive factors peri-implant, which is responsible for creating an osteogenic microenvironment able to drive osteoblast differentiation and modulate ECM remodeling. Taking this into account, it seems that mechanotransduction-based angiocrine molecules explain the successful use of titanium during osseointegration.

Adipogenesis-Related Metabolic Condition Affects Shear-Stressed Endothelial Cells Activity Responding to Titanium

PURPOSE

Obesity has increased around the world. Obese individuals need to be better assisted, with special attention given to dental and medical specialties. Among obesity-related complications, the osseointegration of dental implants has raised concerns. This mechanism depends on healthy angiogenesis surrounding the implanted devices. As an experimental analysis able to mimic this issue is currently lacking, we address this issue by proposing an in vitro high-adipogenesis model using differentiated adipocytes to further investigate their endocrine and synergic effect in endothelial cells responding to titanium.

MATERIALS AND METHODS

Firstly, adipocytes (3T3-L1 cell line) were differentiated under two experimental conditions: Ctrl (normal glucose concentration) and High-Glucose Medium (50 mM of glucose), which was validated using Oil Red O Staining and inflammatory markers gene expression by qPCR. Further, the adipocyte-conditioned medium was enriched by two types of titanium-related surfaces: Dual Acid-Etching (DAE) and Nano-Hydroxyapatite blasted surfaces (nHA) for up to 24 h. Finally, the endothelial cells (ECs) were exposed in those conditioned media under shear stress mimicking blood flow. Important genes related to angiogenesis were then evaluated by using RT-qPCR and Western blot.

RESULTS

Firstly, the high-adipogenicity model using 3T3-L1 adipocytes was validated presenting an increase in the oxidative stress markers, concomitantly with an increase in intracellular fat droplets, pro-inflammatory-related gene expressions, and also the ECM remodeling, as well as modulating mitogen-activated protein kinases (MAPKs). Additionally, Src was evaluated by Western blot, and its modulation can be related to EC survival signaling.

CONCLUSION

Our study provides an experimental model of high adipogenesis in vitro by establishing a pro-inflammatory environment and intracellular fat droplets. Additionally, the efficacy of this model to evaluate the EC response to titanium-enriched mediums under adipogenicity-related metabolic conditions was analyzed, revealing significant interference with EC performance. Altogether, these data gather valuable findings on understanding the reasons for the higher percentage of implant failures in obese individuals.

Titanium-Enriched Medium Promotes Environment-Induced Epigenetic Machinery Changes in Human Endothelial Cells

It is important to understand whether endothelial cells are epigenetically affected by titanium-enriched media when angiogenesis is required during bone development and it is expected to be recapitulated during osseointegration of biomaterials. To better address this issue, titanium-enriched medium was obtained from incubation of titanium discs for up to 24 h as recommended by ISO 10993-5:2016, and further used to expose human umbilical vein endothelial cells (HUVECs) for up to 72 h, when the samples were properly harvested to allow molecular analysis and epigenetics. In general, our data show an important repertoire of epigenetic players in endothelial cells responding to titanium, reinforcing protein related to the metabolism of acetyl and methyl groups, as follows: Histone deacetylases (HDACs) and NAD-dependent deacetylase sirtuin-1 (Sirt1), DNA methyltransferases (DNMTs) and ten-eleven translocation (TET) methylcytosine dioxygenases, which in conjunction culminate in driving chromatin condensation and the methylation profile of DNA strands, respectively. Taking our data into consideration, HDAC6 emerges as important player of this environment-induced epigenetic mechanism in endothelial cells, while Sirt1 is required in response to stimulation of reactive oxygen species (ROS) production, as its modulation is relevant to vasculature surrounding implanted devices. Collectively, all these findings support the hypothesis that titanium keeps the surrounding microenvironment dynamically active and so affects the performance of endothelial cells by modulating epigenetics. Specifically, this study shows the relevance of HDAC6 as a player in this process, possibly correlated with the cytoskeleton rearrangement of those cells. Furthermore, as those enzymes are druggable, it opens new perspectives to consider the use of small molecules to modulate their activities as a biotechnological tool in order to improve angiogenesis and accelerate bone growth with benefits of a fast recovery time for patients.

Preparation and characterization of novel as-cast Ti-Mo-Nb alloys for biomedical applications

Ti and its alloys are the most used metallic biomaterials devices due to their excellent combination of chemical and mechanical properties, biocompatibility, and non-toxicity to the human body. However, the current alloys available still have several issues, such as cytotoxicity of Al and V and high elastic modulus values, compared to human bone. β-type alloys, compared to α-type and (α + β)-type Ti alloys, have lower elastic modulus and higher mechanical strength. Then, new biomedical β-type alloys are being developed with non-cytotoxic alloying elements, such as Mo and Nb. Therefore, Ti-5Mo-xNb system alloys were prepared by argon arc melting. Chemical composition was evaluated by EDS analysis, and the density measurements were performed by Archimedes' method. The structure and microstructure of the alloys were obtained by X-ray diffraction and optical and scanning electron microscopy. Microhardness values were analyzed, and MTT and crystal violet tests were performed to assess their cytotoxicity. As the Nb concentration increases, the presence of the β-Ti phase also grows, with the Ti-5Mo-30Nb alloy presenting a single β-Ti phase. In contrast, the microhardness of the alloys decreases with the addition of Nb, except the Ti-5Mo-10Nb alloy, which has its microhardness increased probably due to the ω phase precipitation. Biological in-vitro tests showed that the alloys are not cytotoxic.

Nanohydroxyapatite-Blasted Bioactive Surface Drives Shear-Stressed Endothelial Cell Growth and Angiogenesis

Nanosized crystalline hydroxyapatite coating (HAnano®) accelerates the osteointegration of dental implants which is hypothesized to drive angiogenesis. In order to test this hypothesis, we have subjected shear-stressed human umbilical vein endothelial cells (HUVECs) to a HAnano®-enriched medium, as well as to surface presenting dual acid etching (DAE) as a control. To note, the titanium implants were coated with 10 nm in diameter HA particles using the Promimic HAnano method. Our data reveals that HAnano® modulates higher expression of genes related with endothelial cell performance and viability, such as VEGF, eNOS, and AKT, and further angiogenesis in vitro by promoting endothelial cell migration. Additionally, the data shows a significant extracellular matrix (ECM) remodeling, and this finding seems developing a dual role in promoting the expression of VEGF and control endothelial cell growth during angiogenesis. Altogether, these data prompted us to further validate this phenomenon by exploring genes related with the control of cell cycle and in fact our data shows that HAnano® promotes higher expression of CDK4 gene, while p21 and p15 genes (suppressor genes) were significantly lower. In conjunction, our data shows for the first time that HAnano®-coated surfaces drive angiogenesis by stimulating a proliferative and migration phenotype of endothelial cells, and this finding opens novel comprehension about osseointegration mechanism considering nanosized hydroxyapatite coating dental implants.

Metabolic effects of CoCr-enriched medium on shear-stressed endothelial cell and osteoblasts: A possible mechanism involving a hypoxic condition on bone healing

Cobalt-chromium (CoCr)-based alloys have emerged as an interesting biomaterial within biomedical field, mainly considering their biocompatibility, resistance to corrosion and absence of magnetism; however, its effect on cell metabolism is barely known and this prompted us better evaluating whether CoCr-enriched medium affects the metabolism of both osteoblast and endothelial cells, and also if there is a coupling between them. This is also considered here the already-known effect of Cobalt (Co) as a hypoxic element. Firstly, discs of CoCr [subjecting (W) or not (Wo) to dual acid-etched (DAE)] were incubated into FBS-free cell culture medium up to 24 h (37 °C). This CoCr-enriched medium was further used to treat shear-stressed endothelial cells cultures up to 72 h. Thereafter, the conditioned medium containing metabolites of shear-stressed endothelial cells in response to CoCr-enriched medium was further used to subject osteoblast's cultures, when the samples were properly harvested to allow the analysis of the molecular issues. Our data shows that CoCr-enriched medium contains 1.5 ng-2.0 ng/mL of Co, which was captured by endothelial cells and osteoblasts in about 30% in amount and it seems modulate their metabolic pathways: shear-stressed endothelial cells expressed higher profile of HIF1α, VEGF and nNOS genes, while their global profile of protein carbonylation was lower than the control cultures, suggesting lower oxidative stress commitment. Additionally, osteoblasts responding to metabolites of CoCr-challenged endothelial cells show dynamic expression of marker genes in osteogenic differentiation, with alkaline phosphatase (ALP), osteocalcin, and bone sialoprotein (BSP) genes being significantly increased. Additionally, tensional shear-stress forces decrease the stimulus for ColA1gene expression in osteoblasts responding to endothelial cells metabolites, as well as modifying the extracellular matrix remodeling related genes. Analyzing the activities of matrix metalloproteinases (MMPs), the data shows that shear-stressed endothelial cells metabolites increase the activities of both MMP9 and MMP2 in osteoblasts. Altogether, our data shows for the first time that shear-stressed endothelial metabolites responding to CoCr discs contribute to osteogenic phenotype in vitro, and this predicts an active crosstalk between angiogenesis and osteogenesis during osseointegration of CoCr alloy and bone healing, maybe guided by the Co-induced hypoxic condition.

The molecular pathway triggered by zirconia in endothelial cells involves epigenetic control

The requirement to achieve natural looking restorations is one of the most challenging aspects in dentistry. Although zirconia has provided new opportunities for achieving superior aesthetics and physicochemical outcomes, very little has been achieved for its cellular and molecular performance, especially considering angiogenesis and osteogenesis. As angiogenesis is a secondary event and concomitant to osteogenesis, an indirect effect of dental implant on endothelial cells could be the release of active molecules such as those already reported affecting osteoblasts. To better address this issue, we challenged human endothelial cells (HUVECs) with zirconia-conditioned medium up to 72 h to allow analysis specific gene expression and protein pattern of mediators of epigenetic machinery in full. Our data shows involvement of zirconia in triggering intracellular signaling through MAPK-ERK activation, leading the signal to activate histone deacetylase HDAC6 likely with concomitant well-modulated DNA methylation profile by DNMTs and TETs. These signaling pathways seem to culminate in cytoskeleton rearrangement of endothelial cells, an important prerequisite to cell migration expected in angiogenesis. Collectively, this study demonstrates for the first time epigenetic-related molecular mechanism involved in endothelial cells responding to zirconia, revealing a repertoire of signaling molecules capable of executing the reprogramming process of gene expression, which are necessary to drive cell proliferation, migration, and consequently angiogenesis. This set of data can further studies using gene editing approaches to better elucidate functional roles.

PI3K/AKT signaling drives titanium-induced angiogenic stimulus

Although osseointegration and clinical success of titanium (Ti)-implanted materials depend on neovascularization in the reactional peri-implant tissue, very little has been achieved considering the Ti-molecules release on the behavior of endothelial cells. To address this issue, we challenged endothelial cells (HUVECs) with Ti-enriched medium obtained from two types of commercial titanium surfaces [presenting or not dual-acid etching (DAE)] up to 72 h to allow molecular machinery analysis. Our data show that the Ti-enriched medium provokes significant stimulus of angiogenesis-related machinery in endothelial cells by upexpressing VEGFR1, VEGFR2, VEGF, eNOS, and iNOS genes, while the PI3K/Akt signaling pathway was also significantly enhanced. As PI3K/AKT signaling was related to angiogenesis in response to vascular endothelial growth factor (VEGF), we addressed the importance of PI3K/Akt upon Ti-enriched medium responses by concomitantly treating the cells with wortmannin, a well-known PI3K inhibitor. Wortmannin suppressed the angiogenic factors, because VEGF, VEGFR1, and eNOS genes were downregulated in those cells, highlighting the importance of PI3K/AKT signaling on driving angiogenic phenotype and angiogenesis performance within the peri-implant tissue reaction. In conjunction, these data reinforce that titanium-implantable devices modify the metabolism of surrounding cells, such as endothelial cells, probably coupling osteogenesis and angiogenesis processes in peri-implant tissue and then contributing to successfully osseointegration of biomedical titanium-based devices.

Infraphysiological 17β-estradiol (E2) concentration compromises osteoblast differentiation through Src stimulation of cell proliferation and ECM remodeling stimulus

It has been shown that 17β-estradiol (E2) helps to prevent bone loss. This study was undertaken to verify whether E2 action in human osteoblasts involves changes in the transcriptional profile of the TNF-α, IFN-γ, NF-κB, TRAIL, TGF-β, MMP2, MMP9, RECK, TIMP1, TIMP2, CDK2, CDK4, SRC, RUNX2, and SHH genes. Infraphysiological doses of E2 elevated mRNAs in all genes except for INF-γ, TRAIL, and TGF-β. Importantly, a significant increase in the CDKs -2 and -4 genes was found, which strongly suggests cell cycle progression, with a potential dependency of Src involvement, as well as a suppression of the osteoblast differentiation machinery, with ECM remodeling being involved. These data suggest that E2 plays an important role in bone formation and remodeling, and Src seems to play a pivotal role in driving cell proliferation and ECM remodeling. Taken together, these findings contribute to an understanding of the effects of infraphysiological E2 on modulating bone homeostasis, favoring bone resorption, and leading to osteoporosis.

The Impact of Bioactive Surfaces in the Early Stages of Osseointegration: An In Vitro Comparative Study Evaluating the HAnano® and SLActive® Super Hydrophilic Surfaces

There is an increased effort on developing novel and active surfaces in order to accelerate their osteointegration, such as nanosized crystalline hydroxyapatite coating (HAnano®). To better understand the biological behavior of osteoblasts grown on HAnano® surface, the set of data was compared with SLActive®, a hydrophilic sandblasted titanium surface. Methodologically, osteoblasts were seeded on both surfaces up to 72 hours, to allow evaluating cell adhesion, viability, and set of genes encoding proteins related with adhesion, proliferation, and differentiation. Our data shows HAnano® displays an interesting substrate to support cell adhesion with typical spread morphologic cells, while SLActive®-adhering cells presented fusiform morphology. Our data shows that the cellular adhesion mechanism was accompanied with upexpression of integrin β1, Fak, and Src, favoring the assembling of focal adhesion platforms and coupling cell cycle progression (upmodulating of Cdk2, Cdk4, and Cdk6 genes) in response to HAnano®. Additionally, both bioactive surfaces promoted osteoblast differentiation stimulus, by activating Runx2, Osterix, and Alp genes. Although both surfaces promoted Rankl gene expression, Opg gene expression was higher in SLActive® and this difference reflected on the Rankl/Opg ratio. Finally, Caspase1 gene was significantly upmodulated in response to HAnano® and it suggests an involvement of the inflammasome complex. Collectively, this study provides enough evidences to support that the nanohydroxyapatite-coated surface provides the necessary microenvironment to drive osteoblast performance on dental implants and these stages of osteogenesis are expected during the early stages of osseointegration.

Obesity/Metabolic Syndrome and Diabetes Mellitus on Peri-implantitis

Literature has reported that up to 50% of dental implants may be affected by peri-implantitis, a bacteria-induced chronic inflammatory process, which promotes osteoclast-mediated bone resorption and inhibits bone formation, leading to progressive bone loss around implants. Current evidence points toward an increased risk for the development of peri-implantitis in both obesity/metabolic syndrome (MetS) and diabetes mellitus (DM) conditions relative to the healthy population. Currently, there is no effective treatment for peri-implantitis and the 50% prevalence in MetS and DM, along with its predicted increase in the worldwide population, presents a major concern in implant dentistry as hyperglycemic conditions are associated with bone-healing impairment; this may be through dysfunction of osteocalcin-induced glucose metabolism. The MetS/DM proinflammatory systemic condition and altered immune/microbiome response affect both catabolic and anabolic events of bone-healing that include increased osteoclastogenesis and compromised osteoblast activity, which could be explained by the dysfunction of insulin receptor that led to activation of signals related with osteoblast differentiation. Furthermore, chronic hyperglycemia along with associated micro- and macro-vascular ailments leads to delayed/impaired wound healing due to activation of pathways that are particularly important in initiating events linked to inflammation, oxidative stress, and cell apoptosis; this may be through deactivation of AKT/PKB protein, which possesses a pivotal role in drive survival and eNOS signaling. This review presents an overview of the local and systemic mechanisms synergistically affecting bone-healing impairment in MetS/DM individuals, as well as a rationale for hierarchical animal model selection, in an effort to characterize peri-implantitis disease and treatment.

Biofunctionalization of titanium surfaces with alendronate and albumin modulates osteoblast performance

BACKGROUND

Biofunctionalization of titanium surfaces can improve host responses, especially considering the time for osteointegration and patient recovery. This prompted us to modify titanium surfaces with alendronate and albumin and to investigate the behavior of osteoblasts on these surfaces.

METHODS

The biofunctionalization of titanium surfaces was characterized using classical physicochemical approaches and later used to challenge pre-osteoblast cells up to 24 h. Then their viability and molecular behavior were investigated using mitochondrial dehydrogenase activity and RTq-PCR technologies, respectively. Potential stimulus of extracellular remodeling was also investigated by zymography.

RESULTS

Our data indicates a differential behavior of cells responding to the surfaces, considering the activity of mitochondrial dehydrogenases. Molecularly, the differential expression of genes related with cell adhesion highlighted the importance of Integrin-β1, Fak, and Src. These 3 genes were significantly decreased in response to titanium surfaces modified with alendronate, but this behavior was reverted when alendronate was associated with albumin. Alendronate-modified surfaces promoted a significant increase on ECM remodeling, as well as culminating with greater gene activity related to the osteogenic phenotype (Runx2, Alp, Bsp).

CONCLUSION

Altogether, our study found interesting osteogenic behavior of cells in response to alendronate and albumin surfaces, which indicates the need for in vivo analyses to better consider these surfaces before clinical trials within the biomedical field.

Evaluation of human osteoblast metabolic activity in modified titanium-conditioned medium

To evaluate human osteoblast metabolic activity cultured in medium conditioned with commercially pure titanium after surface treatments with alumina or ceramic grit-blasting followed by acid etching. Commercially available, pure Grade 4 titanium disks were used and subjected to seven different surface modifications: (1) machined (MA)-used as the control group; (2) blasted with Al₂O₃ (Al₂O₃); (3) blasted with sintered ceramic (HAS); (4) blasted with non-sintered ceramics (HA); (5) blasted with Al₂O₃ and etched with HCl/H₂SO₄ (Al₂O₃ DE); (6) blasted with sintered ceramic and etched with HCl/H₂SO₄ (HAS DE), and (7) blasted with non-sintered ceramic and etched with HCl/H₂SO₄ (HA DE). A samples roughness evaluation test was carried out with an interference microscope, and energy-dispersive X-ray spectroscopy was performed to evaluate the presence of aluminum, phosphorus, and calcium deposited during the titanium surface treatment along with carbon contaminants acquired by the surface during processing. A culture medium conditioned with the respective samples was prepared in five dilutions, and its effect on human osteoblast cell viability was evaluated using the relative viability of cells. Human osteoblast metabolic activity was found to be the most intensive for the Al₂O₃ DE sample. The lowest activity was observed for the HAS DE. The material's cytocompatibility depended on both the surface roughness and its chemical composition. Etching had a dual effect on cell activity, depending on the chemical composition of the titanium surface after blasting.

A novel BSA immobilizing manner on modified titanium surface ameliorates osteoblast performance

Surface modification of medical and dental devices, to improve their biocorrosion resistance and biocompatibility, can be achieved with the multidisciplinary field of biomaterials. Nanostructured titanium dioxide (TiO₂) has been employed as surface modifier of titanium-based biomaterials because it can prevent the failure of the devices due to wear mechanisms. Moreover, this oxide surface is mostly terminated by hydroxyl groups (-OH) that can be directly functionalized with biomolecules to improve the biocompatibility of these devices. We explored the influence of 3-aminopropyltrimethoxysilane (APTMS) molecules as spacers in bovine serum albumin (BSA) protein immobilization on the physically hydroxylated surfaces of rutile phase TiO₂ films grown by reactive Radio Frequency (RF) magnetron sputtering. X-ray Photoelectron Spectroscopy (XPS) was used to examine the adsorption of BSA and APTMS on the hydroxylated surface of TiO₂ thin films. For biological tests, BSA was directly immobilized on the film surface and on the APTMS monolayer. Biological analysis found better osteoblast performance considering gene markers related to cell adhesion after interacting directly with the surface modified by the immobilization of BSA, especially on the surface where this protein was immobilized by APTMS. Additionally, we addressed the relevance of this biointerfaces on extracellular matrix remodeling by zymography analysis. Altogether, our data provides new insights about the cellular and molecular mechanisms covering the improved osteoblastic response of the proposed surface modification.

Effect of focal adhesion kinase inhibition on osteoblastic cells grown on titanium with different topographies

Objective

The present study aimed to investigate the participation of focal adhesion kinases (FAK) in interactions between osteoblastic cells and titanium (Ti) surfaces with three different topographies, namely, untreated (US), microstructured (MS), and nanostructured (NS).

Methodology

Osteoblasts harvested from the calvarial bones of 3-day-old rats were cultured on US, MS and NS discs in the presence of PF-573228 (FAK inhibitor) to evaluate osteoblastic differentiation. After 24 h, we evaluated osteoblast morphology and vinculin expression, and on day 10, the following parameters: gene expression of osteoblastic markers and integrin signaling components, FAK protein expression and alkaline phosphatase (ALP) activity. A smooth surface, porosities at the microscale level, and nanocavities were observed in US, MS, and NS, respectively.

Results

FAK inhibition decreased the number of filopodia in cells grown on US and MS compared with that in NS. FAK inhibition decreased the gene expression of Alp, bone sialoprotein, osteocalcin, and ALP activity in cells grown on all evaluated surfaces. FAK inhibition did not affect the gene expression of Fak, integrin alpha 1 ( Itga1 ) and integrin beta 1 ( Itgb1 ) in cells grown on MS, increased the gene expression of Fak in cells grown on NS, and increased the gene expression of Itga1 and Itgb1 in cells grown on US and NS. Moreover, FAK protein expression decreased in cells cultured on US but increased in cells cultured on MS and NS after FAK inhibition; no difference in the expression of vinculin was observed among cells grown on all surfaces.

Conclusions

Our data demonstrate the relevance of FAK in the interactions between osteoblastic cells and Ti surfaces regardless of surface topography. Nanotopography positively regulated FAK expression and integrin signaling pathway components during osteoblast differentiation. In this context, the development of Ti surfaces with the ability to upregulate FAK activity could positively impact the process of implant osseointegration.

Osteogenic gene markers are epigenetically reprogrammed during contractile-to-calcifying vascular smooth muscle cell phenotype transition

The understanding of vascular calcification-based mechanism is an urgent pending task in vascular biology and this prompted us to better address this issue by investigating whether DNA methylation mechanism might drive osteogenic marker genes modulation in primary human vascular smooth muscle cells (VSMCs) responding to calcium and phosphate levels overload up to 72 h. Firstly, our data shows this calcifying process recapitulates the molecular repertory of osteogenic biomarkers and specifically requiring RUNX2, Osterix and ALP, BSP genes activations along 72 h in vitro, and this behavior was validated here using other lineages. Conversely, both BMPs 4 and 7 were significantly overexpressed, maybe already as a mechanism in response to RUNX2 and Osterix genes activities identified earlier in response to the calcifying condition, and taken into maintain the calcifying phenotype of VSMCs. Additionally, survival signaling was maintained active and accompanied by a dynamic cytoskeleton rearrangement signaling requiring MAPK and AKT phosphorylations. Moreover, during the contractile-to-calcifying transition phenotype of VSMCs, epigenetic machinery was finely modulated, requiring the translocation of DNMT3B and TET2 into nucleus and this prompted us evaluating whether the profile of osteogenic-related gene promoters' methylation might contribute with this process. By firstly estimating 5meC/5 hmeC ratio changes, we further specifically show the significance of the epigenetic modulation of Osterix and Bone sialoprotein related gene promoters, presenting a positive correlation between the epigenetic signature of their gene promoters and transcriptional patterns. Altogether, our results show for the first time the importance of epigenetic mechanism on modulating osteogenic gene markers reprogramming during calcifying VSMCs phenotype acquisition, which might drive the genesis of vascular ectopic calcification.

Updating the role of matrix metalloproteinases in mineralized tissue and related diseases

Bone development and healing processes involve a complex cascade of biological events requiring well-orchestrated synergism with bone cells, growth factors, and other trophic signaling molecules and cellular structures. Beyond health processes, MMPs play several key roles in the installation of heart and blood vessel related diseases and cancer, ranging from accelerating metastatic cells to ectopic vascular mineralization by smooth muscle cells in complementary manner. The tissue inhibitors of MMPs (TIMPs) have an important role in controlling proteolysis. Paired with the post-transcriptional efficiency of specific miRNAs, they modulate MMP performance. If druggable, these molecules are suggested to be a platform for development of "smart" medications and further clinical trials. Thus, considering the pleiotropic effect of MMPs on mammals, the purpose of this review is to update the role of those multifaceted proteases in mineralized tissues in health, such as bone, and pathophysiological disorders, such as ectopic vascular calcification and cancer.

Cobalt-chromium-enriched medium ameliorates shear-stressed endothelial cell performance

Angiogenesis is a relevant mechanism to be considered for the success of bone healing, even considering endosseous implantable devices, providing adequate delivery of substances necessaries for the cell viability and bone de novo deposition. Within of the repertory of metal-based implantable alloys, cobalt-chromium (CoCr) has emerged with very interesting properties for biomedical applications. Additionally, we have shown that released molecules from implants devices are able to modulate cells away and because that we hypothesized these released molecules might act on endothelial cells. In order to better address this issue, we investigated the effect of Co-Cr-enriched medium on endothelial cells (HUVECs), considering a biological model subjecting those cells to shear-stress to partially mimic the physiological environment and further allow investigating intracellular pathways responsible to drive cytoskeletal rearrangement, cell viability and extracellular matrix (ECM) remodeling processes. Considering the analysis of the metalloproteinases (MMPs) activities, our data indicates an intense ECM remodeling in response to CoCr-enriched medium suggesting some role on angiogenesis once ECM remodeling is prerequisite to cell growth. This was better addressed by revealing its involvement on modifying both mRNA expression and protein levels of members of the MAPK family. Additionally, the expression of CDK4 gene was modulated within the cell response to Co-Cr-enriched medium, while the modulation in the expression of P15 and P21 indicates an important regulatory mechanism required. Overall, our results demonstrate that trace of CoCr elements triggers decisive intracellular signaling in shear-stressed endothelial cells, suggesting influence on angiogenesis-related mechanism and they bring novel insights to explain the biological activity of CoCr as it has been emerged as interesting biomedical materials within the medical and dentistry fields.