Kinetic and thermodynamic studies of Brazilian illite–kaolinite in natural and intercalated forms as adsorbents to removal of Zn2+ from aqueous solutions

Impact and repercussions of the Ostwald-de Izaguirre theory for adsorption from liquid mixtures: A 100-year perspective

The theory developed in 1922 by Wolfgang Ostwald and Ramón de Izaguirre for adsorption from solution is revisited one hundred years later, with a main focus on its impact and repercussions. A concise historical account is initiated with an examination of the circumstances under which that work was generated. After providing some biographic data about the authors' backgrounds at the time they developed it, a concise description of the so-called Ostwald-de Izaguirre theory is presented. This is followed by an assessment of its impact as a whole in the first decades after it was produced. Starting from about 1960, interest was focused on two separate outcomes from the theory: (i) the first classification of adsorption isotherms ever proposed, and (ii) an equation (Ostwald-de Izaguirre equation) that describes adsorption by solids of binary mixtures of miscible liquids and allows separating the contributions from both components of the solution. Although still in occasional use today, the isotherm classification made by Ostwald and de Izaguirre is of almost exclusively historical interest, having been displaced by Giles' classification. Unlike this, the Ostwald-de Izaguirre equation is still used and, since it derives from a simple mass balance, there is general agreement that no assumptions were made that limit its use. Thus, it seems that there is nothing to prevent the applicability of this equation in the future.

Highly efficient preferential adsorption of Pb(II) and Cd(II) from aqueous solution using sodium lignosulfonate modified illite

In this study, sodium lignosulfonate modified illite (LS-ILT), an environmentally friendly adsorbent, was prepared by hydrothermal modification. An extensive study of Pb(II) and Cd(II) adsorption behavior and the mechanisms were conducted by evaluating the effects of initial pH value, sorbents dosage, and initial concentration of Pb(II) and Cd(II). Results showed that the adsorption characteristics of Pb(II) and Cd(II) by LS-ILT were well described by quasi-second-order kinetics and the Freundlich model, and the maximum adsorption capacity of Pb(II) and Cd(II) was 42.3 mg/g and 17.0 mg/g, respectively. The optimal application conditions for adsorption equilibrium were the dosage of 4 g/L and reaction pH = 5.5-5.8. The adsorption stability of Pb(II) by LS-ILT was better than that of Cd(II), and most of the existence of coexisting cations had no obvious inhibitory effect on the removal of Pb(II) and Cd(II). Furthermore, the dynamic adsorption results showed that LS-ILT can meet the ultra-low emission standard, and the adsorption capacity could maintain over 50% after four cycles, further providing certain guiding significance for the treatment of wastewater with ultra-low concentrations of heavy metals Pb(II) and Cd(II).

Systematic utilization of layered double hydroxide nanosheets for effective removal of methyl orange from an aqueous system by π-π stacking-induced nanoconfinement

Systematic utilization of carbonated Mg-Al layered double hydroxide (LDH) nanosheets for methyl orange removal was investigated with respect to particle dimensions. LDHs with the smallest dimensions were carefully synthesized to have a small lateral size as well as high dispersibility. The other particles, with medium and large sizes, were prepared by hydrothermal treatment and urea hydrolysis to have larger sizes and higher crystallinity. According to kinetics and isotherm analyses, the smallest LDH showed efficient adsorption of methyl orange (1250 mg/g-LDH), which was remarkably higher than the adsorption by the other LDHs with larger lateral sizes. Unlike the larger lateral-sized LDHs, the small ones were shown to utilize all accessible adsorption sites on the nanosheets, generating nanoconfinement of methyl orange molecules. Transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD) patterns indicated that the LDHs with lateral dimensions of ~40 nm fully utilized interlayer nanospace. Monte Carlo simulation suggested that the intercalated methyl orange was stabilized not only through electrostatic interactions with the LDH layer but also by π-π stacking between the methyl orange molecules, which is thought to be the driving force for replacement of carbonate anions.

Chromium (VI) adsorption from wastewater using porous magnetite nanoparticles prepared from titanium residue by a novel solid-phase reduction method

Porous magnetite nanoparticles were successfully synthesized by reduction of titanium residue with pyrite under nitrogen protection, and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, vibrating sample magnetometer, X-ray photoelectron spectroscope, zeta potential and Brunauer-Emmett-Teller method. The XRD analysis confirmed the formation of porous magnetite nanoparticles with single spinel structure. The SEM image demonstrated that porous magnetite nanoparticles displayed spherical shape with the average diameter of ~51nm. The surface area of porous magnetite nanoparticles with high magnetic moment (78emu·g^-1) was 11.1m²g^-1. The experimental results revealed that equilibrium adsorption behavior of Cr(VI) was well described by Langmuir isotherm model with the maximum adsorption capacity of 14.49mgg^-1 at 298.15K, and kinetic data was found to fit well with pseudo-second-order model. The adsorption rate for Cr(VI) was controlled by both boundary layer diffusion and intraparticle diffusion. Thermodynamics analysis showed that the adsorption processes of Cr(VI) were endothermic and spontaneous. In addition, the adsorption of Cr(VI) on porous magnetite nanoparticles was classified as chemisorption adsorption, which depended on electrostatic attraction accompanied with reduction of Cr(VI) to Cr(III). Porous magnetite nanoparticles were readily regenerated and used repeatedly for Cr(VI) adsorption at least five cycles. Furthermore, the experimental results indicate that porous magnetite nanoparticles have a promising application for Cr(VI) adsorption from wastewater.

Effect of the acid treatment conditions of kaolinite on etheramine adsorption: A comparative analysis using chemometric tools

The present work evaluated the effect of the acid treatment conditions of natural kaolinite (NK) regarding its efficiency in removing etheramine. The treatment was conducted using sulfuric acid at the concentrations of 1 mol L^-1 (KA-01), 2 mol L^-1 (KA-02) and 5 mol L^-1 (KA-05) at 85 °C. The obtained adsorbents were characterized by X-ray fluorescence, X-ray diffraction, N₂ adsorption/desorption isotherms, zeta potential analysis and infrared spectroscopy. The Response Surface Method was used to optimize adsorption parameters (initial concentration of etheramine, adsorbent mass and pH of the solution). The results, described by means of a central composite design, were adjusted to the quadratic model. Results revealed that the adsorption was more efficient at the etheramine concentration of 400 mg L^-1, pH 10 and adsorbent mass of 0.1 g for NK and 0.2 g for KA-01, KA-02 and KA-05. The sample KA-02 presented a significant increase of etheramine removal compared to the NK sample. The adsorption kinetics conducted under optimized conditions showed that the system reached the equilibrium in approximately 30 min. The kinetic data were better adjusted to the pseudo-second order model. The isotherm data revealed that the Sips model was the most adequate one. The calculation of E_ads allowed to infer that the mechanism for etheramine removal in all the evaluated samples was chemisorption. The reuse tests showed that, after four uses, the efficiency of adsorbents in removing etheramine did not suffer significant modifications, which makes the use of kaolinite to treat effluents from the reverse flotation of iron ore feasible.