Experimental and theoretical study on corrosion inhibition of o-phenanthroline for aluminum in HCl solution

Trizma as an eco-friendly efficient inhibitor for the acidic corrosion of steel: experimental and computational studies

The inhibition characteristics of Trizma for corrosion of steel in 1 M HCl was investigated using the weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy techniques and the surface techniques XRD,SEM and EDX. The potentiodynamic results indicated that Trizma act as a mixed type inhibitor for steel in 1 M HCl giving efficiently 93.7% percent inhibition for 1 × 10^–2 mol/L. The electrochemical impedance spectroscopy results showed an increase in R_ct values and decrease in the value of C_dl with increasing the concentration of Trizma indicating that the presence of Trizma in the solution retards the steel corrosion due to the adsorption of its molecules at the steel/solution interface. The XRD and SEM results indicated that the surface of the steel contains Trizma molecules. The DFT method was investigated to correlate the molecular properties of the studied Trizma with the experimental inhibition efficiency. Langmuir, Flory–Huggins isotherm, and the Kinetic–thermodynamic model were used to fit the corrosion inhibition data of Trizma. The results indicated that the Langmuir isotherm does not fit with the experimental results due mainly to the non-ideal adsorption of its molecules at the steel/solution interface. However, Flory–Huggins isotherms, and the Kinetic–thermodynamic model are applicable and showed that the adsorption process of Trizma on the steel surface is cooperative (Chemical–Physical).

Corrosion inhibition studies of ferrocenyl Schiff bases in a mild acidic medium through experimental methods and DFT calculations

The organometallic ferrocenyl Schiff bases were synthesized and tested as anticorrosive material on AA2219-T6 in acidic medium using Tafel polarization, EIS, weight loss analysis, FT-IR spectroscopy and theoretically proved by DFT.

Corrosion Inhibition of 3003 Aluminum Alloy in Molar Hydrochloric Acid Solution by Olive Oil Mill Liquid By-Product

According to the literature, the works on the inhibition of aluminum alloy corrosion using naturally occurring compounds are limited. For this, the inhibiting effect of oil mill liquid by-product (OMW) on the corrosion of 3003 aluminum alloy (AA3003) in molar hydrochloric acid solution was evaluated using electrochemical techniques. In parallel, a computational approach based on DFT/B3LYP and Monte Carlo methods was used to understand the inhibition process under electronic and atomic scales, respectively. The experimental results reveal that OMW has a good inhibiting effect on the corrosion of AA3003 alloy in the tested solution and acts as a cathodic inhibitor. The inhibitory efficiency increases by increasing OMW concentration to attain 89% at 6.0 ppm. The effect of temperature shows that the inhibition efficiency of OMW decreases with temperature rising. Nevertheless, a good prevention capacity of 83% is obtained at 338 K. Such interesting achieved protection property was attributed to the adsorption of OMW constituents onto the alloy surface via a mixed physichemisorption process. This process is found to obey the Langmuir adsorption isotherm. Furthermore, the activation thermodynamic parameters of the corrosion process of AA3003 alloy were also determined and discussed. The computational outcomes outlined the ability of the OMW components to interact favorably with the metal surface, hence the formation of a protective layer, which justified the observed inhibition behaviors. Conferring to the present study, OMW can be used as a good green corrosion inhibitor for AA3003 alloy in the acidic medium.

Imidazolium-based Ionic Liquid as Efficient Corrosion Inhibitor for AA 6061 Alloy in HCl Solution

The corrosion inhibition performance of an imidazolium-based ionic liquid (IL), 1-butyl-3-methylimidazolium thiocyanate (BMIm), was studied on AA 6061 alloy in 1 M HCl solution at 303 K, 333 K, and 363 K by gravimetric tests, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) analysis. Scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) were used to detect the surface morphologies and chemical composition of the surface films. The results indicate that this IL inhibits AA 6061 corrosion in acid with maximum inhibition efficiencies of 98.2%, 86.6%, and 41.2% obtained at 303 K, 333 K, and 363 K respectively. Inhibition efficiency generally decreased with increasing immersion time; the major exception was at 303 K, whereby the inhibition efficiency was detected to increase with immersion time from 30 to 90 min and then decrease slightly beyond 90 min. The results indicate that BMIm is a mixed-type inhibitor with a predominant effect on cathodic reactions. Surface morphology analyses by SEM revealed less surface damage in the presence of the inhibitor. XPS analysis established the development of a protective film on the AA 6061 surface which was hydrophobic in nature.

Inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives: a comparative study of experimental and theoretical results

Herein, we present a comparative study of experimental and theoretical results on the inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives.

Organic corrosion inhibitors for aluminium and its alloys in acid solutions: a review

Corrosion inhibition of aluminium in acidic solutions using different organic compounds.

Corrosion inhibition of X70 sheets by a film-forming imidazole derivative at acidic pH

Chemisorbed IMPA film on X70 steel sheet has significantly reduced the corrosion rate of the metal substrate (up to 90%) in a chloride-enriched medium at pH 0.

Green Schiff's bases as corrosion inhibitors for mild steel in 1 M HCl solution: experimental and theoretical approach

Three cysteine based Schiff bases were synthesized and their corrosion inhibition properties on mild steel in 1 M HCl solution were evaluated using weight loss and electrochemical studies and quantum chemical calculations.