Prediction of carbon dioxide solubility in ionic liquids using MLP and radial basis function (RBF) neural networks

Application of machine learning models to improve the prediction of pesticide photodegradation in water by ZnO-based photocatalysts

Pesticide pollution has been posing a significant risk to human and ecosystems, and photocatalysis is widely applied for the degradation of pesticides. Machine learning (ML) emerges as a powerful method for modeling complex water treatment processes. For the first time, this study developed novel ML models that improved the estimation of the photocatalytic degradation of various pesticides using ZnO-based photocatalysts. The input parameters encompassed the source of light, mass proportion of dopants to Zn, initial pesticide concentration (C0), pH of the solution, catalyst dosage and irradiation time. Additionally, physicochemical properties such as the molecular weight of the dopants and pesticides, as well as the water solubility of both dopants and pesticides, were considered. Notably, the numerical data were extracted from the literature via relevant tables (directly) or graphs (indirectly) using the web-based tool WebPlotDigitizer. Four ML models including multi-layer perceptron artificial neural network (MLP-ANN), particle swarm optimization-adaptive neuro fuzzy inference system (PSO-ANFIS), radial basis function (RBF), and coupled simulated annealing-least squares support vector machine (CSA-LSSVM) were developed. In comparison, RBF showed the best accuracy of modeling among all models, with the highest determination coefficient (R2) of 0.978 and average absolute relative deviation (AARD) of 4.80%. RBF model was effective in estimating the photocatalytic degradation of pesticides except for 2-chlorophenol, triclopyr and lambda-cyhalothrin, where CSA-LSSVM model demonstrated superior performance. Dichlorvos was completely degraded by ZnO photocatalyst under visible light. The sensitivity analysis by relevancy factor exhibited that light irradiation time and initial pesticide concentration were the most important parameters influencing photocatalytic degradation of pesticides positively and negatively, respectively. The new ML models provide a powerful tool for predicting pesticide degradation in wastewater treatment, which will reduce photochemical experiments and promote sustainable development.

Prediction of CO2 solubility in Ionic liquids for CO2 capture using deep learning models

Ionic liquids (ILs) are highly effective for capturing carbon dioxide (CO2). The prediction of CO2 solubility in ILs is crucial for optimizing CO2 capture processes. This study investigates the use of deep learning models for CO2 solubility prediction in ILs with a comprehensive dataset of 10,116 CO2 solubility data in 164 kinds of ILs under different temperature and pressure conditions. Deep neural network models, including Artificial Neural Network (ANN) and Long Short-Term Memory (LSTM), were developed to predict CO2 solubility in ILs. The ANN and LSTM models demonstrated robust test accuracy in predicting CO2 solubility, with coefficient of determination (R2) values of 0.986 and 0.985, respectively. Both model's computational efficiency and cost were investigated, and the ANN model achieved reliable accuracy with a significantly lower computational time (approximately 30 times faster) than the LSTM model. A global sensitivity analysis (GSA) was performed to assess the influence of process parameters and associated functional groups on CO2 solubility. The sensitivity analysis results provided insights into the relative importance of input attributes on output variables (CO2 solubility) in ILs. The findings highlight the significant potential of deep learning models for streamlining the screening process of ILs for CO2 capture applications.

Computer-Aided Molecular Design of Ionic Liquids as Advanced Process Media: A Review from Fundamentals to Applications

The unique physicochemical properties, flexible structural tunability, and giant chemical space of ionic liquids (ILs) provide them a great opportunity to match different target properties to work as advanced process media. The crux of the matter is how to efficiently and reliably tailor suitable ILs toward a specific application. In this regard, the computer-aided molecular design (CAMD) approach has been widely adapted to cover this family of high-profile chemicals, that is, to perform computer-aided IL design (CAILD). This review discusses the past developments that have contributed to the state-of-the-art of CAILD and provides a perspective about how future works could pursue the acceleration of the practical application of ILs. In a broad context of CAILD, key aspects related to the forward structure-property modeling and reverse molecular design of ILs are overviewed. For the former forward task, diverse IL molecular representations, modeling algorithms, as well as representative models on physical properties, thermodynamic properties, among others of ILs are introduced. For the latter reverse task, representative works formulating different molecular design scenarios are summarized. Beyond the substantial progress made, some future perspectives to move CAILD a step forward are finally provided.

Application of a Single Multilayer Perceptron Model to Predict the Solubility of CO2 in Different Ionic Liquids for Gas Removal Processes

In this work, 2099 experimental data of binary systems composed of CO2 and ionic liquids are studied to predict solubility using a multilayer perceptron. The dataset includes 33 different types of ionic liquids over a wide range of temperatures, pressures, and solubilities. The main objective of this work is to propose a procedure for the prediction of CO2 solubility in ionic liquids by establishing four stages to determine the model parameters: (1) selection of the learning algorithm, (2) optimization of the first hidden layer, (3) optimization of the second hidden layer, and (4) selection of the input combination. In this study, a bound is set on the number of model parameters: the number of model parameters must be less than the amount of predicted data. Eight different learning algorithms with (4,m,n,1)-type hidden two-layer architectures (m = 2, 4, …, 10 and n = 2, 3, …, 10) are studied, and the artificial neural network is trained with three input combinations with three combinations of thermodynamic variables such as temperature (T), pressure (P), critical temperature (Tc), critical pressure, the critical compressibility factor (Zc), and the acentric factor (ω). The results show that the 4-6-8-1 architecture with the input combination T-P-Tc-Pc and the Levenberg–Marquard learning algorithm is a very acceptable and simple model (95 parameters) with the best prediction and a maximum absolute deviation close to 10%.

A multi-factor integrated model for carbon price forecasting: Market interaction promoting carbon emission reduction

Reasonable carbon price can effectively promote the low-carbon transformation of economy. The future carbon price has an important guiding significance for enterprises and the country. However, the nonlinear and high noise characteristics inherent in carbon price make them challenging to predict accurately. A hybrid decomposition and integration prediction model is proposed using the Hodrick-Prescott filter, an improved grey model and an extreme learning machine to solve this problem. First, a large number of factors that influence carbon price are collected by meta-analysis. The final input is selected through a two-stage feature selection process. Second, the HP filter is used to decompose the input into long-term trends and short-term fluctuations predicted by the improved GM and ELM, respectively. Finally, the two prediction sequences are compared to obtain the final result. European Union Allowances futures price data are applied for empirical analysis. The results show that the prediction performance of this model is better than the other 10 benchmark models, the T-bill, Stoxx50, S&P clean energy index and Brent oil price in the financial and energy markets are helpful in the carbon price's prediction. T-bill affects carbon price frequently, Stoxx50 has a negative correlation with the carbon price in the influence period. Under normal circumstances, the S&P clean energy index is positively correlated with the carbon price. However, when the economic situation is depressed, resulting in a short-term negative correlation between them. In general, carbon market is significantly affected by cross spill over between different markets. The method not only improves the accuracy of carbon price forecast, but also the application of the improved GM explains the reasons for the change of carbon price, which is helpful to promote the realization of carbon neutralization by market-oriented means.

Prediction of the Solubility of CO2 in Imidazolium Ionic Liquids Based on Selective Ensemble Modeling Method

Solubility data is one of the essential basic data for CO2 capture by ionic liquids. A selective ensemble modeling method, proposed to overcome the shortcomings of current methods, was developed and applied to the prediction of the solubility of CO2 in imidazolium ionic liquids. Firstly, multiple different sub–models were established based on the diversities of data, structural, and parameter design philosophy. Secondly, the fuzzy C–means algorithm was used to cluster the sub–models, and the collinearity detection method was adopted to eliminate the sub–models with high collinearity. Finally, the information entropy method integrated the sub–models into the selective ensemble model. The validation of the CO2 solubility predictions against experimental data showed that the proposed ensemble model had better performance than its previous alternative, because more effective information was extracted from different angles, and the diversity and accuracy among the sub–models were fully integrated. This work not only provided an effective modeling method for the prediction of the solubility of CO2 in ionic liquids, but also provided an effective method for the discrimination of ionic liquids for CO2 capture.

An Overview on the Toxicological Properties of Ionic Liquids toward Microorganisms

Ionic liquids (ILs), a class of materials with unique physicochemical properties, have been used extensively in the fields of chemical engineering, biotechnology, material sciences, pharmaceutics, and many others. Because ILs are very polar by nature, they can migrate into the environment with the possibility of inclusion in the food chain and bioaccumulation in living organisms. However, the chemical natures of ILs are not quintessentially biocompatible. Therefore, the practical uses of ILs must be preceded by suitable toxicological assessments. Among different methods, the use of microorganisms to evaluate IL toxicity provides many advantages including short generation time, rapid growth, and environmental and industrial relevance. This article reviews the recent research progress on the toxicological properties of ILs toward microorganisms and highlights the computational prediction of various toxicity models.

Tackling environmental challenges in pollution controls using artificial intelligence: A review

This review presents the developments in artificial intelligence technologies for environmental pollution controls. A number of AI approaches, which start with the reliable mapping of nonlinear behavior between inputs and outputs in chemical and biological processes in terms of prediction models to the emerging optimization and control algorithms that study the pollutants removal processes and intelligent control systems, have been developed for environmental clean-ups. The characteristics, advantages and limitations of AI methods, including single and hybrid AI methods, were overviewed. Hybrid AI methods exhibited synergistic effects, but with computational heaviness. The up-to-date review summarizes i) Various artificial neural networks employed in wastewater degradation process for the prediction of removal efficiency of pollutants and the search of optimizing experimental conditions; ii) Evaluation of fuzzy logic used for intelligent control of aerobic stage of wastewater treatment process; iii) AI-aided soft-sensors for precisely on-line/off-line estimation of hard-to-measure parameters in wastewater treatment plants; iv) Single and hybrid AI methods applied to estimate pollutants concentrations and design monitoring and early-warning systems for both aquatic and atmospheric environments; v) AI modelings of short-term, mid-term and long-term solid waste generations, and various ANNs for solid waste recycling and reduction. Finally, the future challenges of AI-based models employed in the environmental fields are discussed and proposed.

Use of Neural Networks to Identify Safety Prevention Priorities in Agro-Manufacturing Operations within Commercial Grain Elevators

The grain handling industry plays a significant role in U.S. agriculture by storing, distributing, and processing a variety of agricultural commodities. Commercial grain elevators are hazardous agro-manufacturing work environments where workers are prone to severe injuries, due to the nature of the activities and workplace. Safety incidents in agro-manufacturing operations generally arise from a combination of factors, rather than a single cause, therefore, research on occupational incidents must look deeper into identifying the underlying causes, through the application of advanced analyses methods. In occupational safety, it is possible to estimate and predict probability of safety risks through developing artificial neural network predictive models. Due to the significance of safety risk assessment in the design and prioritization of effective prevention measures, this study aimed at classifying and predicting causes of occupational incidents in grain elevator agro-manufacturing operations in the Midwest region of the United States. Workers’ compensation claims data, from 2008 to 2016, were utilized for training multilayer perceptron (MLP) and radial basis function (RBF) neural networks. Both MLP and RBF models could predict the probability of safety risks with a high overall accuracy of 60%, 61%. Based on values of AUC (area under the curve) from the ROC (receiving operating charts), both models predicted the probability of individual safety risks with a high accuracy rate of between 71.5% and 99.2%. In addition, sensitivity analysis showed that nature of injury is the most significant determinant of safety risks probability, along with type of injury. The novelty of this study is the use of the artificial neural network methodology to analyze multi-level causes of occupational incidents as the sources of safety risks in bulk storage facilities. The results confirm that artificial neural networks are useful in safety risk estimation, and identifying the incidents’ risk factors. The implementation of safety measures in grain elevators can help in preventing occupational injuries, saving lives, and reducing the occurrence and severity of such incidents in industrial work environments.

Prediction of CO2 Solubility in Ionic Liquids Based on Multi-Model Fusion Method

Reducing the emissions of greenhouse gas is a worldwide problem that needs to be solved urgently for sustainable development in the future. The solubility of CO2 in ionic liquids is one of the important basic data for capturing CO2. Considering the disadvantages of experimental measurements, e.g., time-consuming and expensive, the complex parameters of mechanism modeling and the poor stability of single data-driven modeling, a multi-model fusion modeling method is proposed in order to predict the solubility of CO2 in ionic liquids. The multiple sub-models are built by the training set. The sub-models with better performance are selected through the validation set. Then, linear fusion models are established by minimizing the sum of squares of the error and information entropy method respectively. Finally, the performance of the fusion model is verified by the test set. The results showed that the prediction effect of the linear fusion models is better than that of the other three optimal sub-models. The prediction effect of the linear fusion model based on information entropy method is better than that of the least square error method. Through the research work, an effective and feasible modeling method is provided for accurately predicting the solubility of CO2 in ionic liquids. It can provide important basic conditions for evaluating and screening higher selective ionic liquids.