Preparation of magnetic triethylene tetramine-graphene oxide ternary nanocomposite and application for Cr (VI) removal

Efficient removal of both heavy metal ion and dyes from wastewater using magnetic response adsorbent of block polymer brush-grafted N-doped biochar

The recovery of biomass from agricultural and forestry waste could realize effective utilization of waste and synthesis of novel adsorbent. Herein, porous biochar was prepared from waste ginkgo biloba leaves and modified by Reversible Addition-Fragmentation Chain Transfer Polymerization (RAFT). And the prepared adsorbent exhibited excellent adsorption capacity owing to its abundant functional groups and porous structure. In addition, the adsorption capacities of the prepared adsorbent for Malachite Green (MG), Amaranth (AM) and Cr (Ⅵ) were 422.59, 373.75 and 368.82 mg/g, respectively, surpassing those of many previously reported materials. Subsequently, the influence of various factors on adsorption performance was studied. The results showed that adsorption of MG, AM and Cr (Ⅵ) on adsorbent followed pseudo-second-order and Langmuir models and the adsorbent also displayed excellent cycling performance. The experimental results of application in various water samples showed that the adsorbent had outstanding adsorption performance in real water samples, further proving that the adsorbent had wide application and practicability. Finally, a simple adsorption column was used for filtration experiments to simulate industrial application. The results were exhibited that the adsorbent had great potential in treating wastewater containing MG, AM and Cr (Ⅵ).

Removal of Chromium Species by Adsorption: Fundamental Principles, Newly Developed Adsorbents and Future Perspectives

Emerging chromium (Cr) species have attracted increasing concern. A majority of Cr species, especially hexavalent chromium (Cr(VI)), could lead to lethal effects on human beings, animals, and aquatic lives even at low concentrations. One of the conventional water-treatment methodologies, adsorption, could remove these toxic Cr species efficiently. Additionally, adsorption possesses many advantages, such as being cost-saving, easy to implement, highly efficient and facile to design. Previous research has shown that the application of different adsorbents, such as carbon nanotubes (carbon nanotubes (CNTs) and graphene oxide (GO) and its derivatives), activated carbons (ACs), biochars (BCs), metal-based composites, polymers and others, is being used for Cr species removal from contaminated water and wastewater. The research progress and application of adsorption for Cr removal in recent years are reviewed, the mechanisms of adsorption are also discussed and the development trend of Cr treatment by adsorption is proposed.

Polyethyleneimine-impregnated alkali treated waste bamboo powder for effective dye removal

In this study, the polyethyleneimine (PEI) modified waste bamboo powder (WBP-Na-PEI) was successfully prepared and applied to adsorbing Congo red (CR) dye from aqueous solution. The obtained materials were characterized by field emission scanning electron microscope, X-ray diffraction, Fourier transform-infrared, and thermogravimetric analysis. The results showed that WBP-Na-PEI(1.8 K-5) was synthesized successfully and PEI uniformly covered the WBP-Na-PEI(1.8 K-5) surface. In the process of adsorption, four kinds of influencing factors were discussed, and the adsorption mechanisms such as kinetics, isotherm, thermodynamics were explored. The maximum adsorption capacity of WBP-Na-PEI(1.8 K-5) was 992.94 mg·g^-1 at 298 ± 1 K, and the removal efficiency was over 98%. Pseudo-first-order, pseudo-second-order and intra-particle diffusion models were studied, the results showed that the adsorption process conformed to the pseudo-second-order model, and the rate of this process was controlled by many steps. Furthermore, the removal efficiency of the adsorption kinetics reached 85% within 10 minutes. The results of the isotherm model and thermodynamics showed that the adsorption process was consistent with the Langmuir model and was mainly a spontaneous chemical endothermic process of monolayer. And the removal efficiency of the adsorbent reached 93% at the concentration of 400 mg/L, which can be expected to have a broad prospect in the treatment of CR industrial wastewater.

Recent Advances in Applications of Hybrid Graphene Materials for Metals Removal from Wastewater

The presence of traces of heavy metals in wastewater causes adverse health effects on humans and the ecosystem. Adsorption is a low cost and eco-friendly method for the removal of low concentrations of heavy metals from wastewater streams. Over the past several years, graphene-based materials have been researched as exceptional adsorbents. In this review, the applications of graphene oxide (GO), reduce graphene oxide (rGO), and graphene-based nanocomposites (GNCs) for the removal of various metals are analyzed. Firstly, the common synthesis routes for GO, rGO, and GNCs are discussed. Secondly, the available literature on the adsorption of heavy metals including arsenic, lead, cadmium, nickel, mercury, chromium and copper using graphene-based materials are reviewed and analyzed. The adsorption isotherms, kinetics, capacity, and removal efficiency for each metal on different graphene materials, as well as the effects of the synthesis method and the adsorption process conditions on the recyclability of the graphene materials, are discussed. Finally, future perspectives and trends in the field are also highlighted.

Novel ternary nanohybrids of tetraethylenepentamine and graphene oxide decorated with MnFe2O4 magnetic nanoparticles for the adsorption of Pb(II)

Novel ternary nanohybrids, consisting of tetraethylenepentamine (TEPA), graphene oxide (GO) and manganese ferrite magnetic nanoparticles (TEPA-GO/MnFe₂O₄), were prepared by a facile hydrothermal method and utilized to remove Pb(II) from aqueous solution effectively. The adsorbents were characterized by SEM, TEM, XRD, FTIR, zeta potential analysis, magnetization hysteresis loop, BET and XPS. These nanoparticles exhibited superparamagnetic behavior as well as high removal efficiency for Pb(II). Moreover, numerous amino groups of the functionalized pendant TEPA on GO coupled with the porous structure of TEPA-GO/MnFe₂O₄ contribute to high Pb(II) adsorption capacity. The maximum Pb(II) adsorption capacity of TEPA-GO/MnFe₂O₄ was determined to be 263.2 mg/g at the optimized solution pH of 5.5, much higher than that of GO/MnFe₂O₄ (133.3 mg/g) and GO (196.1 mg/g). The kinetics and isotherm data fitted well with the pseudo-second-order kinetics and the Langmuir isotherm model, respectively. Thermodynamic studies revealed that the Pb(II) adsorption of TEPA-GO/MnFe₂O₄ was a endothermic and spontaneous process. The experimental results corroborated that TEPA-GO/MnFe₂O₄ can be efficaciously reused after washed with HCl, indicative of its potential applications in environmental cleanup.