Anticorrosive superhydrophobic AZ61 Mg surface with peony-like microstructures

Successful Fabrication of Hydrophobic Surfaces of Microstructures Cooperating with Solid-Liquid Nanomaterials on the CuZnPb Alloy Substrate

For protecting the exquisite structural patterns of such coins, developments of simple preparation methods were explored to achieve good hydrophobic capability and the wear-damage resistance of CuZnPb surfaces. A self-cleaning nanoliquid (SN) was combined with microstructured Ag-dispersed CuZnPb (MAC) to realize good hydrophobicity functions of the SNMAC. This was because the cooperative functions of silver and the SN enhanced the water reunion ability and increased solid-liquid-gas contact areas, leading to high contact angles of SNMAC. Their cooperations produced discrepant forces in their respective areas of the water drops and increased heterogeneous flowing, resulting in a high-angle hysteresis of SNMAC. Subsequently, the wear-damage resistance of the hydrophobic interface was measured in a ball-on-flat tribopair system, and the results showed that sliding injuries made a height distribution of the hydrophobic surface trend toward an equalization, allowing the cooperation of nano-silver, SN, and CuZnPb to form a new-style interface for achieving excellent hydrophobicity, thus producing the highest contact angles of the SNMAC among the as-prepared samples.

Constructing Colorful Surfaces with Mechanical Robustness for Magnesium Alloys via a Reagent-Free Method

The colorful and mechanically robust surfaces of metallic materials are important for their applications in electronics, automobile, aerospace, and so on, but it is challenging to prepare them at a reasonable cost. Herein, we propose a simple, environment-friendly, and cost-effective method, reagent-free hydrothermal treatment, to prepare colorful surfaces of magnesium alloys with mechanical robustness. The as-treated surface mainly composes of magnesium (hydr)oxides with a biomimetic microstructure, whose thickness and roughness increase linearly with the hydrothermal time. By adjusting the hydrothermal time, a series of surface colors of magnesium alloys are obtained because of light interference. The as-treated surface with film thickness more than 1.1 μm exhibits high Vickers hardness (∼500 HV), low friction coefficient (∼0.26), and low wear rate (1.06 × 10^-5 mm³·N^-1·m^-1), which is superior to most magnesium alloys after surface treatments. The microstructure of the as-treated surface can be retained after harsh tribological tests, demonstrating attractive mechanical robustness. Furthermore, the method proposed here was extended to the surface treatments of other series of magnesium alloys, which verifies the great potential of this method for large-scale industrial application of colorful metallic materials with mechanical robustness.