Highly active and cost-effective CuO-based carbon nanocomposite with unique morphology for catalytic synthesis of imines under solvent-free conditions

Copper nanocatalysts applied in coupling reactions: a mechanistic insight

Copper-based nanocatalysts have seen great interest for use in synthetic applications since the early 20th century, as evidenced by the exponential number of contributions reported (since 2000, more than 48 000 works published out of about 81 300 since 1900; results from SciFinder using "copper nanocatalysts in organic synthesis" as keywords). These huge efforts are mainly based on two key aspects: (i) copper is an Earth-abundant metal with low toxicity, leading to inexpensive and eco-friendly catalytic materials; and (ii) copper can stabilize different oxidation states (0 to +3) for molecular and nanoparticle-based systems, which promotes different types of metal-reagent interactions. This chemical versatility allows different pathways, involving radical or ionic copper-based intermediates. Thus, copper-based nanoparticles have become convenient catalysts, in particular for couplings (both homo- and hetero-couplings), transformations that are involved in a remarkable number of processes affording organic compounds, which find interest in different fields (medicinal chemistry, natural products, drugs, materials, etc.). Clearly, this richness in reactivity makes understanding the mechanisms more complex. The present review focuses on the analysis of reported contributions using monometallic copper-based nanoparticles as catalytic precursors applied in coupling reactions, paying attention to those shedding light on the reaction mechanism.

Sea-Island-Like Morphology of CuNi Bimetallic Nanoparticles Uniformly Anchored on Single Layer Graphene Oxide as a Highly Efficient and Noble-Metal-Free Catalyst for Cyanation of Aryl Halides

Aryl nitriles are versatile compounds that can be synthesized via transition-metal-mediated cyanation of aryl halides. Most of the supported-heterogeneous catalysts are noble-metals based and there are very limited numbers of efficient non-noble metal based catalysts demonstrated for the cyanation of aryl halides. Herein, bimetallic CuNi-oxide nanoparticles supported graphene oxide nanocatalyst (CuNi/GO-I and CuNi/GO-II) has been demonstrated as highly efficient system for the cyanation of aryl halides with K₄[Fe(CN)₆] as a cyanating agent. Metal-support interaction, defect ratio and synergistic effect with the bimetallic nanocatalyst were investigated. To our delight, the CuNi/GO-I system activity transformed a wide range of substrates such as aryl iodides, aryl bromides, aryl chlorides and heteroaryl compounds (Yields: 95-71%, TON/TOF: 50-38/2 h^-1). Moreover, enhanced catalytic performance of CuNi/GO-I and CuNi/GO-II in reduction of 4-nitropehnol with NaBH₄ was also confirmed (k_app = 18.2 × 10^-3 s^-1 with 0.1 mg of CuNi/GO-I). Possible mechanism has been proposed for the CuNi/GO-I catalyzed cyanation and reduction reactions. Reusability, heterogeneity and stability of the CuNi/GO-I are also found to be good.

Interfacial engineering by creating Cu-based ternary heterostructures on C3N4 tubes towards enhanced photocatalytic oxidative coupling of benzylamines

Benzylamine coupling is a very important reaction for the synthesis of imine but still faces many challenges. Herein, we present a highly effective strategy towards the coupling reaction by using environmentally friendly catalysts. These catalysts are composed of Cu/Cu₂O/Cu₃N heterostructures supported by C₃N₄ tubes and the composites were synthesized by one-step hydrothermal treatment followed by calcination. Cu₂O, Cu₃N, and C₃N₄ all are responsive to visible light and the heterojunction formed can greatly enhance the charge separation. When used as photocatalysts for oxidative self-coupling of benzylamine at a low temperature of 323 K in air, Cu/Cu₂O/Cu₃N/C₃N₄ was able to give conversion and selectivity values of up to 99% and 98%, respectively. The high efficiency of the catalysts is attributable to their ability to generate large quantities of free radicals (such as ·OH and ·O₂⁻) under visible-light irradiation.

Cu/Cu₂O/Cu₃N heterostructures supported C₃N₄ tubes were synthesized by one-step hydrothermal treatment followed by calcination, which showed enhanced photocatalytic activity for oxidative self-coupling of benzylamine under visible-light.

Facile Green Preparation of Rhodium Nanoclusters Supported Nano-Scaled Graphene Platelets for Sonogashira Coupling Reaction and Reduction of p-Nitrophenol

Rhodium nanoclusters were uniformly dispersed on nano-scaled graphene platelets by a simple ‘mix and heat’ method without using any toxic reagents. Distilled water was used to obtain the homogenous dispersion of Rh-nanoclusters on graphene platelets. The morphology of the resultant catalyst (Rh(0)NCs/GNPs) was studied by means of transmission electron microscope (TEM) and atomic force microscope (AFM) analyses. The X-ray photoemission spectroscope (XPS) result confirmed the metallic form of Rh-nanoclusters in Rh(0)NCs/GNPs. The crystalline property and the interaction between Rh-nanoclusters and graphene platelets (GNPs) were studied by means of XRD and Raman analysis. The Rh-loading in Rh(0)NCs/GNPs was confirmed by scanning electron microscope and energy dispersive spectroscope (SEM-EDS) and inductively coupled plasma-mass spectroscope (ICP-MS) analysis. After being optimized, the Rh(0)NCs/GNPs used as catalyst for the reduction of 4-nitrophenol with NaBH4 and the Sonogashira coupling reaction between iodobenzene with phenylacetylene. To our delight, the Rh(0)NCs/GNPs showed excellent catalytic activity towards the reduction of 4-nitrophenol with an excellent turnover frequency (TOF) value of 112.5 min−1. The kapp and k’ values were calculated to be 62.07 × 10−3 min−1(0.002 mg of Rh(0)NCs/GNPs) and 31035 × 10−3 mg−1 min−1,respectively. Alike, under the optimal conditions, the Rh(0)NCs/GNPs gave the desired product, diphenylacetylene, in a good yield of 87% with 91% selectivity. The Rh(0)NCs/GNPs can be reused without significant loss in its catalytic activity.

Facile Mechanochemical Synthesis of Nickel/Graphene Oxide Nanocomposites with Unique and Tunable Morphology: Applications in Heterogeneous Catalysis and Supercapacitors

In this study, a very simple and highly effective mechanochemical preparation method was developed for the preparation of Ni nanoparticles supported graphene oxide (GO) nanocomposites (Ni/GO, where Ni is a composition of Ni(OH)2, NiOOH, NiO, Ni2O3 and NiO2), 3 wt% NiO/GO (Ni/GO-1) and 8 wt% NiO/GO(Ni/GO-2). The developed method is not only very simple and efficient, but also, the morphology of Ni/GO nanocomposites can be tuned by simply varying the metal loading. Morphology and specific surface area of the resultant Ni/GO nanocomposites were investigated by mean of AFM, HR-TEM and BET. Chemical sate and factual content of Ni in Ni/GO-1 and Ni/GO-2, and the presence of defective sites in Ni-nanocomposites were investigated in detail. To our delight, the prepared Ni/GO-2 demonstrated superior catalytic activity toward the reduction of 2- and 4-nitrophenol in water with high rate constant (kapp) of 35.4 × 10−3 s−1. To the best of our knowledge, this is the best efficient Ni-based graphene nanocomposites for the reduction of 2- and 4-NP reported to date. The Ni/GO-1 and Ni/GO-2 demonstrated an excellent reusability; no loss in its catalytic activity was noticed, even after 10th cycle. Surprisingly the Ni/GO-2 as electrode material exhibited an excellent specific capacitance of 461 F/g in 6 M KOH at a scan rate of 5 mV. Moreover, the Ni/GO nanocomposites were found to possess poor electrical resistance and high stability (no significant change in the specific capacitance even after 1000 cycles).

Optimización de la síntesis de aldehído canfolénico a partir del epóxido de α-pineno con Cu/MCM-41

Se sintetizó el catalizador Cu/MCM-41 mediante impregnación húmeda incipiente y se caracterizó por DRX, XPS, TPD-NH3 y adsorción-desorción de N2. Se evaluó el efecto de diferentes condiciones de reacción (temperatura, tiempo, tipo de solvente y cantidad de catalizador) en la isomerización del epóxido de α-pineno para la obtención de aldehído canfolénico con el catalizador Cu/MCM-41, que no había sido reportado previamente para este tipo de reacción. Se partió de un diseño experimental central compuesto mediante análisis de superficie de respuesta. Se encontró que la mejor selectividad fue de 85% (5 mg de catalizador; 70 °C; 0,5 h y el uso de acetato de etilo como solvente). Adicionalmente, se determinaron los principales factores y sus combinaciones que tenían mayor significancia en la síntesis del aldehído ajustado a un modelo polinomial de segundo grado. Se encontró que los factores que tienen mayor influencia en la conversión son la cantidad de catalizador, tiempo de reacción, el tipo de solvente y el factor combinado entre la cantidad de catalizador y el tipo de solvente. En el caso de la selectividad hacia el producto deseado no se encontró ningún factor significativo.