A strategy for effective cesium adsorption from aqueous solution by polypentacyanoferrate-grafted polypropylene fabric under γ-ray irradiation

Manganese dioxide decorated kiwi peel powder for efficient removal of lead from aqueous solutions, blood and Traditional Chinese Medicine extracts

For human health and environment safety, it is of great significance to develop novel materials with high effectiveness for removal of lead from not only aqueous solutions but also human body and traditional Chinese medicines. Here, functional kiwi peel composite, manganese dioxide decorated kiwi peel powder (MKPP), is proposed for the removal of Pb2+ effectively. The adsorption of Pb2+ in aqueous solution is a highly selective and endothermic process and kinetically follows a pseudo-second-order model, which can reach equilibrium with the capacity of 192.7 mg/g within 10 min. Comprehensive factors of hydration energy, charge-to-radius ratio and softness of Pb2+ make a stronger affinity between MKPP and Pb2+. The possible adsorption mechanism involves covalent bond, electrostatic force and chelation, etc. MKPP can be efficiently regenerated and reused with high adsorption efficiency after five cycles. Besides, MKPP can remove over 97% of Pb2+ from real water samples. MKPP can also alleviate lead poisoning to a certain extent and make the Pb level of TCM extract meet the safety standard. This work highlights that MKPP is a promising adsorbent for the removal of Pb2+ and provides an efficient strategy for reusing kiwi peel as well as dealing with the problem of Pb pollution.

Efficient cesium encapsulation from contaminated water by cellulosic biomass based activated wood charcoal

In this study, cost-effective cellulosic biomass based activated wood charcoal was developed from Japanese Sugi tree (Cryptomeria japonica) by concentrated nitric acid modification for adsorption of Cs from contaminated water. The physicochemical properties of specimens were investigated using N₂ adsorption-desorption isotherms (BET method), FESEM, FTIR, and XPS spectra analysis. The experimental results revealed that the surface area of the raw wood charcoal was significantly decreased after boiling nitric acid modification. However, several oxygen-containing acidic function groups (-COOH, -CO) were introduced on the surface. The adsorption study confirmed that the equilibrium contact time was 1 h, the optimum adsorption pH was neutral to alkaline and the suitable adsorbent dose was 1:100 (solid: liquid). The maximum Cs was removed when the concentration of Na and K were lower (5.0 mM) with Cs in solution. The Cs adsorption processes well approved by the Langmuir isotherm and pseudo-second-order kinetic models and the maximum adsorption capacity was 35.46 mgg^-1. The Cs adsorption mechanism was clearly described and it was assumed that the adsorption was strongly followed by chemisorptions mechanism based on the adsorbent surface properties, kinetic model and Langmuir isotherm model. Most importantly, about 98% of volume reduction was obtained by burning (500 °C) the Cs adsorbed charcoal, which ensured safe storage and disposal of radioactive waste. Therefore, this study can offer a guideline to produce a functional adsorbent for effective Cs removal and safe radioactive waste disposal.

Prussian blue immobilized cellulosic filter for the removal of aqueous cesium

Cesium is a typical radioisotope that has a long half-life and is dangerous and can be emitted in the event of a nuclear accident. Prussian blue (PB), which is known to effectively adsorb cesium, is difficult to separate when it is dissolved in an aqueous system. In this study, PB was immobilized on a filter type support media, cellulose filter (CF), for use as a selective material for cesium adsorption. The commercially available CF was functionalized by the addition of acrylic acid (AA) (i.e., CF-AA) to enhance the PB immobilization, which increased both PB loading and binding strength. The AA functionalization changed the major functional groups from hydroxyl to carboxylic, as confirmed by Fourier-transform infrared spectroscopy. As a result of the surface modification, the PB immobilization increased 1.5 times and reduced detachment of PB during washing. The prepared adsorbent, CF-AA-PB, was tested for its cesium adsorption capability. Cesium adsorption equilibrated within 3 h, and the maximum cesium adsorption capacity was 16.66 mg/g. The observed decrease in the solution pH during cesium adsorption inhibited the overall cesium uptake; however, this was minimized by buffering. The prepared CF-AA-PB was used as a filter material and its potential use as a countermeasure for removing radioactive cesium from a contaminated water stream was demonstrated.