Synthesis and characterization of polyaniline tailored graphene oxide quantum dot as an advance and highly crystalline carbon-based luminescent nanomaterial for fabrication of an effective anti-corrosion epoxy system on mild steel

Chitosan grafted with gallic acid and cerium dioxide hybrid nanocomposites as environmentally friendly corrosion inhibitors for mild steel: An experimental and computational study

Chitosan grafted with gallic acid (CS-GA), along with CS-GA doped with CeO2 nanoparticles (CS-GA-CeO2) were synthesized as novel environmentally friendly mild steel corrosion inhibitors. The formation of these derivatives was confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), hydrogen nuclear magnetic resonance spectroscopy (1H NMR), and thermal analysis (TGA). Based on potentiodynamic polarization curves (PDP) measurements, the inhibitors acted primarily as hybrid inhibitors, while following the Langmuir adsorption theory model. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy(XPS) and 3D surface profiles, confirmed that CS-GA-CeO2 adsorbed on the mild steel forming a protective layer thus preventing the invasion of corrosive media. The corrosion protection mechanism of chitosan derivatives was investigated by molecular dynamics simulations. Electrochemical measurements were used to investigate the corrosion inhibition by CS-GA and CS-GA-CeO2 on mild steel in a 3.5 % NaCl solution. At room temperature, the highest inhibition efficiency (93.58 %) was achieved at 200 ppm CS-GA-CeO2. Modified chitosan nanocomposites were confirmed as promising corrosion inhibitors.

Preparation and Characterization of Graphene Oxide/Polyaniline/Polydopamine Nanocomposites towards Long-Term Anticorrosive Performance of Epoxy Coatings

To address the challenging issues of metal materials corrosion in industries, which has caused huge economic losses and security threats to many facilities in marine environments, functional polymer coatings have been widely used and regarded as one of the simplest and most effective methods to prevent such an undesirable event. In this study, a new type of coating filler consisting of graphene oxide/polyaniline/polydopamine (GO-PANI-PDA) nanocomposites has been successfully synthesized. The morphology, structure, composition, and corrosion resistance performance of the GO-PANI-PDA (GPP) nanocomposites were investigated via a series of characterization methods. The results from our electrochemical impedance spectroscopy, potentiodynamic polarization curve and salt spray experiment showed that the best corrosion resistance performance of the coating is from GPP 21 with the epoxy/GO-PANI:PDA ratio of 2:1, which exhibited a positive corrosion potential (−0.51 V) shift from epoxy/GO-PANI coating (−0.64 V). The corrosion current density (3.83 × 10−8 A/cm2) of GPP 21 is nearly an order of magnitude lower than that of epoxy/GO-PANI (7.05 × 10−7 A/cm2). The good anti-corrosion performance was fascinatingly observed in salt spray tests even without obvious corrosion phenomenon after 30 days of testing. Due to these remarkable properties, GPP nanocomposites can be an outstanding candidate for the rapid development of broadband shielding and anticorrosive materials.

Robust corrosion guard, mechanical and UV aging properties of metal complex/epoxy hybrid composite coating for C-steel applications

Incorporation of novel-prepared metal–organic complexes as crosslinking accelerators for multifunctional epoxy was on top of interest by coating formulators. The present work investigated the loading of mixed ligand metal complexes (Zr(IV) and Cu(II)) of metformin (MF) and 2.2′bipyridine (Bipy) against the free ligands as crosslinking modifiers via some epoxy coating formulations to assess their superb performances on the C-steel surface. Zr(IV) and Cu(II) demonstrated the minor energy gap (∆E) values at 0.190 au compared to free MF and Bipy according to the calculated energy values, and this behavior reflected their enhanced properties via epoxy coating applications. EIS measurements using high saline formation water as a corrosive medium were performed and offered that PA-DGEBA/MC-Cu coated film showed the superior resistance values (R_ct = 940 and R_c = 930 kΩ cm²). The accelerated corrosion salt spray experiment clarified that PA-DGEBA/MC-Cu coating achieved the least corrosion rate at 0.00049 mm/y and exhibited the highest protection efficiency of 99.84%. SEM/EDX combination survey affirmed the protective performance of the checked coatings. AFM microanalysis confirmed that surface-treated Cu(II) coating displayed the smoothest film surface with complete curing. Mechanical durability properties were evaluated and the obtained results illustrated that pull-off adhesion for PA-DGEBA/MC-Cu coated film fulfilled the highest adhesion strength at 6.3 MPa, the best bend character at 77, and the maximum impact resistance at 59.7 J. UV immovability trial was performed at 10 irradiance and 80 h duration. PA-DGEBA/MC-Cu coated film displayed the highest resistance to UV irradiance with blistering (#8 size and few frequencies) in addition to offering a minor gloss variation and matt properties.

Synthesis of graphene quantum dots and their applications in drug delivery

This review focuses on the recent advances in the synthesis of graphene quantum dots (GQDs) and their applications in drug delivery. To give a brief understanding about the preparation of GQDs, recent advances in methods of GQDs synthesis are first presented. Afterwards, various drug delivery-release modes of GQDs-based drug delivery systems such as EPR-pH delivery-release mode, ligand-pH delivery-release mode, EPR-Photothermal delivery-Release mode, and Core/Shell-photothermal/magnetic thermal delivery-release mode are reviewed. Finally, the current challenges and the prospective application of GQDs in drug delivery are discussed.

A high-efficiency corrosion inhibitor of N-doped citric acid-based carbon dots for mild steel in hydrochloric acid environment

Novel N-doped carbon dots (CDs) were obtained through pyrolysis of ammonium citrate at 180 °C for 1, 2 and 3 h, and their corrosion inhibition effect on Q235 steel in 1 M HCl solution were evaluated through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (Tafel), scanning vibrating electrode technique (SVET) analysis. The changes of corrosion current density and impedance modulus of Q235 steel in inhibitor solutions showed that the as-prepared carbon dots presented a valid protective effect on steel in 1 M HCl solution. Meanwhile, the inhibition efficiency of three carbon dots exceeded 90% at 200 mg/L and the highest inhibitive efficiency was found for the carbon dots prepared at the reaction time of 2 h. The adsorption mechanism of all as-prepared carbon dots complied with the Langmuir adsorption model, containing chemical and physical adsorptions, which was also confirmed by X-ray photoelectronic spectroscopy (XPS) analysis.