Nano-engineered hexagonal PtCuCo nanocrystals with enhanced catalytic activity for ethylene glycol and glycerol electrooxidation

Improving Glycerol Electrooxidation Performance on Nanocubic PtCo Catalysts

As glycerol (GLY) has emerged as a highly functional and cheap platform molecule and as an abundant biodiesel production byproduct, possible conversion methods have been investigated. One of the promising approaches is the glycerol electrooxidation (GEOR) on noble metal-based catalysts. Although noble metals, especially Pt, are generally very stable at different pH and highly selective toward three-carbon (C3) products, their electrocatalytic performance can be further improved by morphology tuning and alloying with non-noble metals like Co. In the present study, cubic PtxCo100-x (x = 100, 80, and 60) nanoparticles were investigated in an alkaline medium at 20 and 40 °C. The effect of the composition and reaction conditions on the selectivity of the GEOR toward C3 products like lactate and glycerate was studied, and the reaction mechanism was discussed. The highest mass activity was found for Pt80Co20, although when the specific activity, glycerol conversion, and GEOR selectivity were compared, Pt60Co40 was the superior catalyst overall. In general, all catalysts, even those that are Co-rich, exhibited a high C3 product selectivity up to 95% at 0.67 V vs RHE. The low applied potential of 0.67 V vs RHE at 40 °C facilitated lactate formation with selectivity up to 72%. At the same time, the glycerate formation with a selectivity of up to 40%, as well as C-C bond cleavage, was more favored at 0.87 V vs RHE.

Sandwich-type electrochemical aptasensor based on Au-modified conductive octahedral carbon architecture and snowflake-like PtCuNi for the sensitive detection of cardiac troponin I

The cardiac troponin I (cTnI) detection is increasingly significant given its promising value in the clinical acute myocardial infarction diagnosis. Here a sensitive sandwich-type cTnI electrochemical aptasensor was developed by using zirconium-carbon loaded with Au (Au/Zr-C) as electrode-modified material and snowflake-like PtCuNi catalyst as label material. The Au/Zr-C was prepared from a carbonation process and a reduction step. The PtCuNi was synthesized by a one-pot hydrothermal reaction. On the one hand, due to its many merits of large effective area, rich pores, high degree of graphitization, the assistance of Au, the Au/Zr-C exhibited remarkable electronic conductivity but low catalytical capacity, thus improving the electrochemical property but lowing the background signal of electrode. On the other hand, because of its accessible active sites of the special snowflake-like structure and the synergy of three elements, the PtCuNi catalyst presented excellent catalytic activity and improved stability compared to binary alloy. The recognition reactions were achieved by stepwise incubation of aptamer 1, cTnI, and aptamer 2-PtCuNi (denoted as Apt2-label) on the Au/Zr-C-modified electrode. The electrocatalytic signals of the immobilized Apt2-label towards the H₂O₂ reduction were recorded in all tests for cTnI analysis. Consequently, this cTnI aptasensor exhibited excellent performance involving a wide linear range of 100 ng mL^-1 to 0.01 pg mL^-1 with a detection limit of 1.24 × 10^-3 pg mL^-1 (S/N = 3), good selectivity, satisfying reproducibility, outstanding stability, and good recovery.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

Glycerol Electro-Oxidation in Alkaline Media and Alkaline Direct Glycerol Fuel Cells

The low price, highly active triol structure, high volumetric energy density, simple storage and environment-friendly properties make glycerol a promising fuel for an alkaline direct alcohol fuel cell (ADAFC). Unlike other ADAFCs, alkaline direct glycerol fuel cells (ADGFCs) can be used either to generate only energy (the common use of fuel cells) or to produce both energy and valuable chemicals. This work presents an overview of catalysts for glycerol oxidation in alkaline media, and their use in ADGFCs. A particular attention was paid to binary and ternary catalysts able both to increase the selectivity to valuable C3 glycerol oxidation products, reducing the C–C bond cleavage, and simultaneously to enhance glycerol conversion.

Polyhedron-Assembled Ternary PtCuCo Nanochains: Integrated Functions Enhance the Electrocatalytic Performance of Methanol Oxidation at Elevated Temperature

Recently, the preparation of a high-performance one-dimensional alloy nanostructure for fuel cells has been given increasing attention due to its smart-structure merits and electronic effect triggered by alloying different kinds of metals at the nanoscale. In this study, unique ternary PtCuCo nanochains assembled with small polyhedra are first achieved and used as high-performance anode electrocatalysts toward methanol oxidation at elevated temperature (60 °C) that is closer to the operating temperature of direct methanol fuel cells than room temperature. The specific activity/mass activity of Pt₄₅Cu₃₅Co₂₀ one-dimensional nanochains can reach up to 18.24 mA cm^-2/4.19 A mg^-1_Pt that is 9.25/10.47 times that of commercial Pt black in sulfuric acid medium. After a 3600 s durability test, the remaining current density of Pt₄₅Cu₃₅Co₂₀ one-dimensional nanochains is 73.3 times that of commercial Pt black. The structure characterizations show that the high density of surface active sites, d-band center of the Pt downshift, moderate strain effect, and synergetic effect are jointly responsible for the enhanced electrocatalytic performance of one-dimensional ternary PtCuCo nanochains.