Construction of hierarchical bundle-like CoNi layered double hydroxides for the efficient oxygen evolution reaction

Immobilizing Bimetallic RuCo Nanoalloys on Few-Layered MXene as a Robust Bifunctional Electrocatalyst for Overall Water Splitting

Doping Co atoms into Ru lattices can tune the electronic structure of active sites, and the conductive MXene can adjust the electrical conductivity of catalysts, which are both favorable for improving the electrocatalytic activity of the catalyst for water splitting. Here, ruthenium-cobalt bimetallic nanoalloys coupled with exfoliated Ti3 C2 Tx MXene (RuCo-Ti3 C2 Tx ) have been constructed by ice-templated and thermal activation. Due to the strong interaction between the RuCo nanoalloys and conductive MXene, RuCo-Ti3 C2 Tx not only exhibits an excellent hydrogen evolution reaction (HER) performance with a low overpotential and Tafel slope (60 mV, 34.8 mV dec-1 in 0.5 M H2 SO4 and 52 mV, 38.7 mV dec-1 in 1 M KOH), but also good oxygen evolution reaction (OER) performance in an alkaline electrolyte (266 mV, 111.1 mV dec-1 in 1 M KOH). The assembled RuCo-Ti3 C2 Tx ||RuCo-Ti3 C2 Tx electrolyzer requires a lower potential (1.56 V) than does the Pt/C||RuO2 electrolyzer at 10 mA cm-2 . A boosted catalytic HER activity from immobilizing the RuCo nanoalloys on MXene was unveiled by density functional theory calculations. This study provides a feasible and efficient strategy for developing MXene-based catalysts for overall water splitting.

Controllable formation of amorphous structure to improve the oxygen evolution reaction performance of a CoNi LDH

The morphology design of layered double hydroxides (LDHs) is an important way to determine the catalytic performance of LDH materials. A novel structure of CoNi LDH sheets with amorphous structure on the edge was prepared by electrooxidation. It was characterized by XRD, SEM, TEM and XPS. It was found that during the electrooxidation, some of the Co²⁺ ions were oxidized to Co³⁺ to form amorphous CoOOH intermediates, which promoted the OER performance. The electrochemical test results show that CoNi LDH treated by electrooxidation for 6 hours has an ultra-low overpotential of 206 mV at a current density of 10 mA cm^-2, and can work stably under alkaline conditions for more than 10 hours. This work suggests that introducing an amorphous structure on LDH through electrooxidation produces abundant active sites, which is an easy and efficient method to improve the OER performance of CoNi LDHs.

Boosting oxygen evolution of layered double hydroxide through electronic coupling with ultralow noble metal doping

Electrocatalytic water oxidation is a rate-determining step in the water splitting process; however, its efficiency is significantly hampered by the limitations of cost-effective electrocatalysts. Here, an advanced Co(OH)₂ electrocatalyst with ultralow iridium (Ir) doping is developed to enable outstanding oxygen evolution reaction (OER) properties; that is, in a 1 M KOH medium, an overpotential of only 262 mV is required to achieve a current density of 10 mA cm^-2, and a small Tafel slope of 66.9 mV dec^-1 is achieved, which is markedly superior to that of the commercial IrO₂ catalyst (301 mV@10 mA cm^-2; 66.9 mV dec^-1). Through the combination of experimental data and a mechanism study, it is disclosed that the high intrinsic OER activity results from the synergistic electron coupling of oxidized Ir and Co(OH)₂, which significantly moderate the adsorption energy of the intermediates. Moreover, we have also synthesized Ru-Co(OH)₂ nanosheets and demonstrated the universal syntheses of Ir-doped CoM (M = Ni, Fe, Mn, and Zn) layered double hydroxides (LDHs).