Covalent immobilization of phthalocyanine on graphene oxide for the degradation of phenol

Enhanced degradation of phenol by a novel biomaterial through the immobilization of bacteria on cationic straw

As phenol possesses a threat to human health, there is a great demand to search for fast and efficient methods for it to be discharged. In this study, a novel biomaterial was prepared by the immobilization of bacteria on a cationic straw carrier, and the remediation ability of the biomaterial on phenol-containing wastewater was investigated. The free bacteria could degrade 1,000 mg/L phenol within 240 h, while the prepared biomaterial was 192 h, shortening by 48 h that of free bacteria. In addition, the degradation tolerance of biomaterial increased from 1,000 mg/L to 1,200 mg/L than the free bacteria, within 216 h, which shortened by 24 h the degradation time of 1,000 mg/L phenol by free bacteria (240 h). Further, under different pH conditions, the degradation efficiency of phenol by prepared biomaterial was much higher than that of free bacteria. Especially for the lower pH 5, the degradation efficiency of biomaterial was nearly twice that of the free bacteria. This investigation demonstrates that this biomaterial has great potential in the field of remediation of organic pollution.

Constructing a Rigid-and-Flexible Twin-Stage Gradient Interphase through Starlike Copolymer Coating on Carbon Fibers: A Route for Enhancing Interfacial Properties of Composites

A rigid-and-flexible interphase was established by a starlike copolymer (Pc-PGMA/Pc) consisting of one tetraaminophthalocyanine (TAPc) core with four TAPc-difunctionalized poly(glycidyl methacrylate) (PGMA) arms through the surface modification of carbon fibers (CFs) and compared with various interphases constructed by TAPc and TAPc-connected PGMA (Pc-PGMA). The increase in the content of N-C═O showed that PGMA/Pc branches were successfully attached onto the CF-(Pc-PGMA/Pc) surface, exhibiting concavo-convex microstructures with the highest roughness. Through adhesive force spectroscopy by atomic force microscopy (AFM) with peak force quantitative nanomechanical mapping (PF-QNM) mode and visualization of the relative distribution of TAPc/PGMA via a Raman spectrometer, a rigid interphase with highly cross-linked TAPc and a flexible layer from PGMA arms as the soft segment were separately detected in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. The rigid-and-flexible interphase in the CF-(Pc-PGMA/Pc)/EP composite provided excellent stress-transfer capability by the rigid inner modulus intermediate layer and energy absorption efficiency from the flexible outer layer, which contributed to 64.6 and 61.8% increment of transverse fiber bundle test (TFBT) strength, and 33.8 and 40.6% enhancement in interfacial shear strength (IFSS) in comparison with those of CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. Accordingly, schematic models of the interphase reinforcing mechanism were proposed. The interfacial failures in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites were derived from the rigid interphase without effective relaxation of interfacial stress and soft interphase with excessive fiber-matrix interface slippage, respectively. The cohesive failure in the CF-(Pc-PGMA/Pc)/EP composite was attributed to the crack deflection through the balance of the modulus and deformability from the twin-stage gradient intermediate layer.