Lignin waste as co-substrate on decolorization of azo dyes by Ganoderma lucidum

Bioremediation of azo dye: A review on strategies, toxicity assessment, mechanisms, bottlenecks and prospects

The synthetic azo dyes are widely used in the textile industries for their excellent dyeing properties. They may be classified into many classes based on their structure and application, including direct, reactive, dispersive, acidic, basic, and others. The continuous discharge of wastewater from a large number of textile industries without prior treatment poses detrimental effects on the environment and human health. Azo dyes and their degradation products are extremely poisonous for their carcinogenic, teratogenic and mutagenic nature. Moreover, exposure to synthetic azo dyes can cause genetic changes, skin inflammation, hypersensitivity responses, and skin irritations in persons, which may ultimately result in other profound issues including the deterioration of water quality. This review discusses these dyes in details along with their detrimental effects on aquatic and terrestrial flora and fauna including human beings. Azo dyes degrade the water bodies by increasing biochemical and chemical oxygen demand. Therefore, dye-containing wastewater should be effectively treated using eco-friendly and cost-effective technologies to avoid negative impact on the environment. This article extensively reviews on physical, chemical and biological treatment with their benefits and challenges. Biological-based treatment with higher hydraulic retention time (HRT) is economical, consumes less energy, produces less sludge and environmentally friendly. Whereas the physical and chemical methods with less hydraulic retention time is costly, produces large sludge, requires high dissolved oxygen and ecologically inefficient. Since, biological treatment is more advantageous over physical and chemical methods, researchers are concentrating on bioremediation for eliminating harmful azo dye pollutants from nature. This article provides a thorough analysis of the state-of-the-art biological treatment technologies with their developments and effectiveness in the removal of azo dyes. The mechanism by which genes encoding azoreductase enzymes (azoG, and azoK) enable the natural degradation of azo dyes by bacteria and convert them into less harmful compounds is also extensively examined. Therefore, this review also focuses on the use of genetically modified microorganisms and nano-technological approaches for bioremediation of azo dyes.

Proteomic investigation reveals the role of bacterial laccase from Bacillus pumilus in oxidative stress defense

The wide distribution of laccases in nature makes them involved in different biological processes. However, little information is known about how laccase participates in the defense machinery of bacteria against oxidative stress. The present study aimed to elucidate the oxidative stress response mechanism of Bacillus pumilus ZB1 and the functional role of bacterial laccase in stress defense. The oxidative stress caused by methyl methanesulfonate (MMS) significantly induced laccase activity and its transcript level. The morphological analysis revealed that the defense of B. pumilus ZB1 against oxidative stress was activated. Based on the proteomic study, 114 differentially expressed proteins (DEPs) were up-regulated and 79 DEPs were down-regulated. In COG analysis, 66.40% DEPs were classified into the category "Metabolism". We confirmed that laccase was up-regulated in response to MMS stress and its functional annotation was related to "Secondary metabolites biosynthesis, transport and catabolism". Based on protein-protein interaction prediction, two up-regulated DEPs (YcnJ and GabP) showed interaction with laccase and contributed to the formation of laccase stability and adaptability. The overexpressed laccase might improve the antioxidative property of B. pumilus ZB1. These findings provide an insight and the guidelines for better exploitation of bioremediation using bacterial laccase. SIGNIFICANCE: Bacillus pumilus is a gram-positive bacterium that has the potential for many applications, such as bioremediation. The expression of bacterial laccase is significantly influenced by oxidative stress, while the underlying mechanism of laccase overexpression in bacteria has not been fully studied. Elucidation of the biological process may benefit the bioremediation using bacteria in the future. In this study, the differentially expressed proteins were analyzed using a TMT-labeling proteomic approach when B. pumilus was treated with methyl methanesulfonate (MMS). Reactive oxygen species induced by MMS activated the secondary metabolites biosynthesis, transport, and catabolism in B. pumilus, including laccase overexpression. Moreover, the simultaneously up-regulated YcnJ and GabP may benefit the synthesis and the stability of laccase, then improve the antioxidative property of B. pumilus against environmental stress. Our findings advance the understanding of the adaptive mechanism of B. pumilus to environmental conditions.

Application of IRI Visualization to Terahertz Vibrational Spectroscopy of Hydroxybenzoic Acid Isomers

The characteristic absorption spectra of three positional isomers of hydroxybenzoic acid are measured using a terahertz time-domain spectroscopy system (THz-TDS) in the 0.6-2.0 THz region at room temperature. Significant differences in their terahertz spectra are discovered, which indicates that THz-TDS is an effective means to identify positional isomers. In order to simulate their spectra, the seven molecular clusters of 2-, 3-, and 4-hydroxybenzoic acid (2-, 3-, and 4-HA) are calculated using the DFT-D3 method. Additionally, the potential energy distribution (PED) method is used to analyze their vibration modes. The analysis indicates that the vibration modes of 2-HA are mainly out-of-plane angle bending and bond angle bend in plane. The vibration modes of 3-HA are mainly bond length stretch and dihedral angle torsion. The vibration modes of 4-HA are mainly bond angle bend in plane and dihedral angle torsion. Interaction region indicator (IRI) analysis is used to visualize the location and type of intermolecular interactions in 2-, 3-, and 4-HA crystals. The results show that the weak interaction type of 2-, 3-, and 4-HA is dominated by van der Waals (vdW) interaction. Therefore, we can confirm that terahertz spectroscopy detection technology can be used as an effective means to identify structural isomers and detect the intermolecular interactions in these crystals. In addition, it can explain the absorption mechanism of terahertz waves interacting with matter.

Wood-Decaying Fungi: From Timber Degradation to Sustainable Insulating Biomaterials Production

Addressing the impacts of climate change and global warming has become an urgent priority for the planet's well-being. In recent decades the great potential of fungal-based products with characteristics equal to, or even outperforming, classic petroleum-derived products has been acknowledged. These new materials present the added advantage of having a reduced carbon footprint, less environmental impact and contributing to the shift away from a fossil-based economy. This study focused on the production of insulation panels using fungal mycelium and lignocellulosic materials as substrates. The process was optimized, starting with the selection of Trametes versicolor, Pleurotus ostreatus, P. eryngii, Ganoderma carnosum and Fomitopsis pinicola isolates, followed by the evaluation of three grain spawn substrates (millet, wheat and a 1:1 mix of millet and wheat grains) for mycelium propagation, and finishing with the production of various mycelium-based composites using five wood by-products and waste materials (pine sawdust, oak shavings, tree of heaven wood chips, wheat straw and shredded beech wood). The obtained biomaterials were characterized for internal structure by X-ray micro-CT, thermal transmittance using a thermoflowmeter and moisture absorption. The results showed that using a wheat and millet 1:1 (w/w) mix is the best option for spawn production regardless of the fungal isolate. In addition, the performance of the final composites was influenced both by the fungal isolate and the substrate used, with the latter having a stronger effect on the measured properties. The study shows that the most promising sustainable insulating biomaterial was created using T. versicolor grown on wheat straw.

Sorghum-grown fungal biocatalysts for synthetic dye degradation

The synthetic dye discharge is responsible for nearly one-fifth of the total water pollution from textile industry, which poses both environmental and public health risks. Herein, a solid substrate inoculated with fungi is proposed as an effective and environmentally friendly approach for catalyzing organic dye degradation. Pleurotus ostreatus was inoculated onto commercially available solid substrates such as sorghum, bran, and husk. Among these, P. ostreatus grown on sorghum (PO-SORG) produced the highest enzyme activity and was further tested for its dye biodegradation ability. Four dye compounds, Reactive Blue 19 (RB-19), Indigo Carmine, Acid Orange 7, and Acid Red 1 were degraded by PO-SORG with removal efficiencies of 93%, 95%, 95%, and 78%, respectively. Under more industrially relevant conditions, PO-SORG successfully degraded dyes in synthetic wastewater and in samples collected from a local textile factory, which reveals its potential for practical usage. Various biotransformation intermediates and end-products were identified for each dye. PO-SORG exhibited high stability even under relatively extreme temperatures and pH conditions. Over 85% removal of RB-19 was achieved after three consecutive batch cycles, demonstrating reusability of this approach. Altogether, PO-SORG demonstrated outstanding reusability and sustainability and offers considerable potential for treating wastewater streams containing synthetic organic dyes.

Efficient Azo Dye Biodecolorization System Using Lignin-Co-Cultured White-Rot Fungus

The extensive use of azo dyes by the global textile industry induces significant environmental and human health hazards, which makes efficient remediation crucial but also challenging. Improving dye removal efficiency will benefit the development of bioremediation techniques for textile effluents. In this study, an efficient system for azo dye (Direct Red 5B, DR5B) biodecolorization is reported, which uses the white-rot fungus Ganoderma lucidum EN2 and alkali lignin. This study suggests that the decolorization of DR5B could be effectively enhanced (from 40.34% to 95.16%) within 48 h in the presence of alkali lignin. The dye adsorption test further confirmed that the alkali-lignin-enhanced decolorization of DR5B was essentially due to biodegradation rather than physical adsorption, evaluating the role of alkali lignin in the dye biodegradation system. Moreover, the gas chromatography/mass spectrometry analysis and DR5B decolorization experiments also indicated that alkali lignin carried an excellent potential for promoting dye decolorization and displayed a significant role in improving the activity of lignin-modifying enzymes. This was mainly because of the laccase-mediator system, which was established by the induced laccase activity and lignin-derived small aromatic compounds.

Fungal-Modified Lignin-Enhanced Physicochemical Properties of Collagen-Based Composite Films

Renewable and biodegradable materials have attracted broad attention as alternatives to existing conventional plastics, which have caused serious environmental problems. Collagen is a potential material for developing versatile film due to its biosafety, renewability, and biodegradability. However, it is still critical to overcome the low mechanical, antibacterial and antioxidant properties of the collagen film for food packaging applications. To address these limitations, we developed a new technology to prepare composite film by using collagen and fungal-modified APL (alkali pretreatment liquor). In this study, five edible and medical fungi, Cunninghamella echinulata FR3, Pleurotus ostreatus BP3, Ganoderma lucidum EN2, Schizophyllum commune DS1 and Xylariaceae sp. XY were used to modify the APL, and that showed that the modified APL significantly improved the mechanical, antibacterial and antioxidant properties of APL/Collagen composite films. Particularly, the APL modified by BP3, EN2 and XY showed preferable performance in enhancing the properties of the composite films. The tensile strength of the film was increased by 1.5-fold in the presence of the APL modified by EN2. To further understand the effect of fungal-biomodified APL on the properties of the composite films, a correlation analysis between the components of APL and the properties of composite films was conducted and indicated that the content of aromatic functional groups and lignin had a positive correlation with the enhanced mechanical and antioxidant properties of the composite films. In summary, composite films prepared from collagen and fungal biomodified APL showed elevated mechanical, antibacterial and antioxidant properties, and the herein-reported novel technology prospectively possesses great potential application in the food packaging industry.

Exploring the potential of a newly constructed manganese peroxidase-producing yeast consortium for tolerating lignin degradation inhibitors while simultaneously decolorizing and detoxifying textile azo dye wastewater

MnP-YC4, a newly constructed manganese peroxidase-producing yeast consortium, has been developed to withstand lignin degradation inhibitors while degrading and detoxifying azo dye. MnP-YC4 tolerance to major biomass-derived inhibitors was promising. MnP induced by lignin was found to be highly related to dye decolorization by MnP-YC4. Simulated azo dye-containing wastewater supplemented with a lignin co-substrate (3,5-Dimethoxy-4-hydroxybenzaldehyde) decolorized up to 100, 91, and 76% at final concentrations of 20, 40, and 60%, respectively. MnP-YC4 effectively decolorized the real textile wastewater sample, reaching up to 91.4%, and the COD value decreased significantly during the decolorization, reaching 7160 mg/l within 7 days. A possible dye biodegradation pathway was proposed based on the degradation products identified by UV-vis, FTIR, GC/MS, and HPLC techniques, beginning with azo bond cleavage and eventually mineralized to CO₂ and H₂O. When compared to the phytotoxic original dye, the phytotoxicity of MnP-YC4 treated dye-containing wastewater samples confirmed the nontoxic nature.

Performance of Meyerozyma caribbica as a novel manganese peroxidase-producing yeast inhabiting wood-feeding termite gut symbionts for azo dye decolorization and detoxification

For hazardous toxic pollutants such as textile wastewater and azo dyes, microbial-based and peroxidase-assisted remediation represents a highly promising and environmentally friendly alternative. Under this scope, gut symbionts of the wood-feeding termites Coptotermes formosanus and Reticulitermes chinenesis were used for the screening of manganese peroxidase (MnP) producing yeasts intended for decolorization and detoxification of textile azo dyes, such as Acid Orange 7 (AO7). To this end, nine out of 38 yeast isolates exhibited high levels of extracellular MnP activity ranging from 23 to 27 U/mL. The isolate PPY-27, which had the highest MnP activity, was able to decolorize various azo dyes with an efficiency ranging from 87.2 to 98.8%. This isolate, which represents the molecularly identified species Meyerozyma caribbica, was successfully characterized in terms of morphological and physiological traits, as well as enzymatic activities. Almost complete decolorization was achieved by the MnP-producing M. caribbica strain SSA1654 after 6 h of incubation with 50 mg/L of the sulfonated azo dye AO7 at 28 °C with an agitation speed of 150 rpm. The maximum decolorization efficiency of AO7 reached 93.8% at 400 mg/L. The decolorization of AO7 was confirmed by Fourier transform infrared (FTIR) and UV-Vis spectral analysis. High performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS) were used to identify AO7 decomposition intermediates. Based on UV-Vis spectra, FTIR, HPLC, and GC-MS analyses, a plausible AO7 biodegradation mechanism pathway was explored, showing azo bond (-N=N-) cleavage and toxic aromatic amines mineralization CO₂ and H₂O. Microtox® and phytotoxicity assays confirmed that the AO7 metabolites produced by the strain SSA1654 were almost non-toxic compared to the original sulfonated azo dye.