Porous cellulose acetate mixed-matrix membrane adsorbents for efficient clearance of p-cresol and creatinine from synthetic serum

Adsorption Capacity of Activated Carbon-Encapsulated Hollow-Type Spherical Bacterial Cellulose Gels for Uremic Toxins in a Simulated Human Gastrointestinal Environment

To reduce the risk of the adsorption of granular activated carbon in the gastrointestinal tract, we successfully produced a hollow-type spherical bacterial cellulose (HSBC) gel containing activated carbon with a particle size of 6 μm. In this study, the aim of which was to develop an effective formulation, we evaluated the stability of activated-carbon-encapsulating HSBC gels under various pH conditions. Activated-carbon-encapsulating HSBC gels (ACEGs) retained the activated carbon without leaking when subjected to agitation in acidic or basic environments. The saturated adsorption amount, calculated using the Langmuir adsorption isotherm, was affected by the target adsorbate and pH conditions. These results indicate that ACEGs can adsorb uremic toxins and their precursors similarly to conventional uremic toxin adsorbents while preventing direct contact between the encapsulated activated carbon and the gastrointestinal tract. Compared to powdered activated carbon, the ACEG is less likely to be adsorbed in the gastrointestinal tract. Therefore, the proposed ACEG is a promising new formulation that will contribute to the treatment of renal failure and improve patients' compliance with medication.

Fabrication of dialysis membrane from cotton Giza 86 cellulose di-acetate prepared using Ac2O and NiCl2 as a new catalyst

This attempt has been made to synthesize the cellulose di-acetate in a solvent-free acetylation system of cotton Giza 86 cellulose with Ac₂O (200 and 300 ml) in the presence of NiCl₂^.6HO (1.0, 1.5 and 2.0 g) as an effectively available and new catalyst by the conventional reflux and microwave irradiation methods. This study also illustrates the preparation of a dialysis membrane made from a cellulose di-acetate-dichloromethane-methanol-polyethylene glycol (MW: 200) casting solution. The microwave irradiation method for the synthesis of cellulose di-acetate showed excellent yields and short reaction time, which is an important feature of this method. The impact of the two methods on the cellulose di-acetate formation and its used in the dialysis membrane formulations was studied. The experimental degree of substitution of the prepared cellulose di-acetate values (DS = 2.00-2.7) showed an agreement with the calculated values by FTIR and ¹H-NMR analysis methods. The formation of cellulose di-acetate with percentage yields varied from 62.85 to 89.85%. The applicability of the prepared membrane in dialysis operation was evaluated in terms of urea clearance, rejection of Bovine Serum Albumin (BSA) and flux of pure water. Characterization of cellulose di-acetate was achieved through ¹H-NMR, FTIR, TGA, and BET analyses. The CA-PEG blend membrane was examined by contact angle measurement, porosity, and water uptake of the membrane. The cellulose acetate membrane surface morphology was determined using SEM. It is observable that the fabricated CA-PEG blend membrane from synthesized cellulose di-acetate by using Nickel chloride as a catalyst is showing remarkable rejection of BSA and urea clearance up to 100 and 67.2%, respectively. The present work is promising and applicable in dialysis membranes.