In vitro infectivity assay for prion titration for application to the evaluation of the prion removal capacity of biological products manufacturing processes

A cold water, ultrasonically activated stream efficiently removes proteins and prion-associated amyloid from surgical stainless steel

Background

Sterile service department decontamination procedures for surgical instruments struggle to demonstrate efficient removal of the hardiest infectious contaminants, such as prion proteins. A recently designed novel system, which uses a low pressure ultrasonically activated, cold water stream, has previously demonstrated efficient hard surface cleaning of several biological contaminants.

Aim

To test the efficacy of an ultrasonically activated stream for the removal of tissue proteins, including prion-associated amyloid, from surgical stainless steel surfaces.

Methods

Test surfaces were contaminated with 22L, ME7 or 263K prion-infected brain homogenates. The surfaces were treated with the ultrasonically activated water stream for contact times of 5 and 10 s. Residual proteinaceous and amyloid contamination were quantified using sensitive microscopic analysis, and immunoblotting was used to characterize the eluted prion residues before and after treatment with the ultrasonically activated stream.

Findings

Efficient removal of the different prion strains from the surgical stainless steel surfaces was observed, and reduced levels of protease-susceptible and -resistant prion protein was detected in recovered supernatant.

Conclusion

This study demonstrated that an ultrasonically activated stream has the potential to be a cost-effective solution to improve current decontamination practices and has the potential to reduce hospital-acquired infections.

Cell Biology Approaches to Studying Prion Diseases

During the course of prion infection, the normally soluble and protease-sensitive mammalian prion protein (PrP^C) is refolded into an insoluble, partially protease-resistant, and infectious form called PrP^Sc. The conformational conversion of PrP^C to PrP^Sc is a critical event during prion infection and is essential for the production of prion infectivity. This chapter briefly summarizes the ways in which cell biological approaches have enhanced our understanding of how PrP contributes to different aspects of prion pathogenesis.

Quality transitivity and traceability system of herbal medicine products based on quality markers

BACKGROUND

Due to a variety of factors to affect the herb quality, the existing quality management model is unable to evaluate the process control. The development of the concept of "quality marker" (Q-marker) lays basis for establishing an independent process quality control system for herbal products.

HYPOTHESIS/PURPOSE

To ensure the highest degree of safety, effectiveness and quality process control of herbal products, it is aimed to establish a quality transitivity and traceability system of quality and process control from raw materials to finished herbal products.

STUDY DESIGN

Based on the key issues and challenges of quality assessment, the current status of quality and process controls from raw materials to herbal medicinal products listed in Pharmacopoeia were analyzed and the research models including discovery and identification of Q-markers, analysis and quality management of risk evaluation were designed.

METHODS

Authors introduced a few new technologies and methodologies, such as DNA barcoding, chromatographic technologies, fingerprint analysis, chemical markers, bio-responses, risk management and solution for quality process control.

RESULTS

The quality and process control models for herbal medicinal products were proposed and the transitivity and traceability system from raw materials to the finished products was constructed to improve the herbal quality from the entire supply and production chain.

CONCLUSION

The transitivity and traceability system has been established based on quality markers, especially on how to control the production process under Good Engineering Practices, as well as to implement the risk management for quality and process control in herbal medicine production.

Biopotency Assays: an Integrated Application to Quality Control of Chinese Materia Medica

The current quality control (QC) pattern for Chinese materia medica (CMM) lacks suitable methods and indicators to evaluate their safety and efficacy effectively, which impedes the smooth development of CMM. In this review, main problems of the current QC pattern for CMM, principally focused on the content determination of constituents, were summarized and the inspiration from the QC of biological products was introduced. With the aim at introducing a suitable tool to the QC of CMM, biopotency assay and its feasibility in the QC pattern for CMM were analyzed and confirmed by relevant researches with years of practice. From the applications of biopotency assays in the QC of CMM in the last 10 years, we propose that biopotency assays should be an integral part of the QC pattern for CMM, for these assays can make the QC indicators related to the clinical safety and efficacy, supplementing the existed QC system of CMM.

Decontamination of prions in a plasma product manufacturing environment

BACKGROUND

The high resistance of prions to inactivating treatments requires the proper management of decontaminating procedures of equipment in contact with materials of human or animal origin destined for medical purposes. Sodium hydroxide (NaOH) is widely used today for this purpose as it inactivates a wide variety of pathogens including prions.

STUDY DESIGN AND METHODS

Several NaOH treatments were tested on prions bound to either stainless steel or chromatographic resins in industrial conditions with multiple prion strains.

RESULTS

Data show a strong correlation between inactivation results obtained by immunochemical detection of the prion protein and those obtained with infectivity assays and establish effective inactivation treatments for prions bound to stainless steel or chromatographic resins (ion exchange and affinity), including treatments with lower NaOH concentrations. Furthermore, no obvious strain-specific behavior difference was observed between experimental models.

CONCLUSION

The results generated by these investigations show that industrial NaOH decontamination regimens (in combination with the NaCl elution in the case of the chromatography process) attain substantial prion inactivation and/or removal between batches, thus providing added assurance to the biologic safety of the final plasma-derived medicinal products.

Comparison of nanofiltration efficacy in reducing infectivity of centrifuged versus ultracentrifuged 263K scrapie-infected brain homogenates in "spiked" albumin solutions

BACKGROUND

The safety of plasma-derived products is of concern for possible transmission of variant Creutzfeldt-Jakob disease. The absence of validated screening tests requires the use of procedures to remove or inactivate prions during the manufacture of plasma-derived products to minimize the risk of transmission. These procedures need proper validation studies based on spiking human plasma or intermediate fractions of plasma fractionation with prions in a form as close as possible to that present in blood.

STUDY DESIGN AND METHODS

Human albumin was spiked with low-speed or high-speed supernatants of 263K scrapie-infected hamster brain homogenates. Spiked albumin was then passed through a cascade of filters from 100 nm down to 20 to 15 nm. Residual infectivity was measured by bioassay.

RESULTS

The overall removal of infectivity spiked into albumin through serial nanofiltration steps was 4 to 5 logs using low-speed supernatant and 2 to 3 logs with high-speed supernatant.

CONCLUSION

These findings confirm the utility of nanofiltration in removing infectivity from plasma (or other products) spiked with scrapie brain homogenate supernatants. However, efficiency is diminished using supernatants that have been ultracentrifuged to reduce aggregated forms of the infectious agent. Thus, filtration removal data based on experiments using "standard" low-speed centrifugation supernatants might overestimate the amount of prion removal in plasma or urine-derived therapeutic products.

A simple, versatile and sensitive cell-based assay for prions from various species

Detection and quantification of prion infectivity is a crucial step for various fundamental and applied aspects of prion research. Identification of cell lines highly sensitive to prion infection led to the development of cell-based titration procedures aiming at replacing animal bioassays, usually performed in mice or hamsters. However, most of these cell lines are only permissive to mouse-adapted prions strains and do not allow titration of prions from other species. In this study, we show that epithelial RK13, a cell line permissive to mouse and bank vole prion strains and to natural prion agents from sheep and cervids, enables a robust and sensitive detection of mouse and ovine-derived prions. Importantly, the cell culture work is strongly reduced as the RK13 cell assay procedure designed here does not require subcultivation of the inoculated cultures. We also show that prions effectively bind to culture plastic vessel and are quantitatively detected by the cell assay. The possibility to easily quantify a wider range of prions, including rodent experimental strains but also natural agents from sheep and cervids, should prompt the spread of cell assays for routine prion titration and lead to valuable information in fundamental and applied studies.