Universal ELISA for quantification of D-antigen in inactivated poliovirus vaccines

Quantitation of Enterovirus A71 Empty and Full Particles by Sedimentation Velocity Analytical Ultracentrifugation

The enterovirus A71 (EV71) inactivated vaccine is an effective intervention to control the spread of the virus and prevent EV71-associated hand, foot, and mouth disease (HFMD). It is widely administered to infants and children in China. The empty particles (EPs) and full particles (FPs) generated during production have different antigenic and immunogenic properties. However, the antigen detection methods currently used were established without considering the differences in antigenicity between EPs and FPs. There is also a lack of other effective analytical methods for detecting the different particle forms, which hinders the consistency between batches of products. In this study, we analyzed the application of sedimentation velocity analytical ultracentrifugation (SV-AUC) in characterizing the EPs and FPs of EV71. Our results showed that the proportions of the two forms could be quantified simultaneously by SV-AUC. We also determined the repeatability and accuracy of this method and found that both parameters were satisfactory. We assessed SV-AUC for bulk vaccine quality control, and our findings indicated that SV-AUC can be used effectively to analyze the percentage of EPs and FPs and monitor the consistency of the process to ensure the quality of the vaccine.

Perspectives for the creation of a new type of vaccine preparations based on pseudovirus particles using polio vaccine as an example

Traditional antiviral vaccines are currently created by inactivating the virus chemically, most often using formaldehyde or β-propiolactone. These approaches are not optimal since they negatively affect the safety of the antigenic determinants of the inactivated particles and require additional purification stages. The most promising platforms for creating vaccines are based on pseudoviruses, i.e., viruses that have completely preserved the outer shell (capsid), while losing the ability to reproduce owing to the destruction of the genome. The irradiation of viruses with electron beam is the optimal way to create pseudoviral particles. In this review, with the example of the poliovirus, the main algorithms that can be applied to characterize pseudoviral particles functionally and structurally in the process of creating a vaccine preparation are presented. These algorithms are, namely, the analysis of the degree of genome destruction and coimmunogenicity. The structure of the poliovirus and methods of its inactivation are considered. Methods for assessing residual infectivity and immunogenicity are proposed for the functional characterization of pseudoviruses. Genome integrity analysis approaches, atomic force and electron microscopy, surface plasmon resonance, and bioelectrochemical methods are crucial to structural characterization of the pseudovirus particles.

The Quantification of Spike Proteins in the Inactivated SARS-CoV-2 Vaccines of the Prototype, Delta, and Omicron Variants by LC-MS

Developing variant vaccines or multivalent vaccines is a feasible way to address the epidemic as the SARS-CoV-2 variants of concern (VOCs) posed an increased risk to global public health. The spike protein of the SARS-CoV-2 virus was usually used as the main antigen in many types of vaccines to produce neutralizing antibodies against the virus. However, the spike (S) proteins of different variants were only differentiated by a few amino acids, making it difficult to obtain specific antibodies that can distinguish different VOCs, thereby challenging the accurate distinction and quantification of the variants using immunological methods such as ELISA. Here, we established a method based on LC-MS to quantify the S proteins in inactivated monovalent vaccines or trivalent vaccines (prototype, Delta, and Omicron strains). By analyzing the S protein sequences of the prototype, Delta, and Omicron strains, we identified peptides that were different and specific among the three strains and synthesized them as references. The synthetic peptides were isotopically labeled as internal targets. Quantitative analysis was performed by calculating the ratio between the reference and internal target. The verification results have shown that the method we established had good specificity, accuracy, and precision. This method can not only accurately quantify the inactivated monovalent vaccine but also could be applied to each strain in inactivated trivalent SARS-CoV-2 vaccines. Hence, the LC-MS method established in this study can be applied to the quality control of monovalent and multivalent SARS-CoV-2 variation vaccines. By enabling more accurate quantification, it will help to improve the protection of the vaccine to some extent.

VaxArray immunoassay for the multiplexed quantification of poliovirus D-antigen

Next generation poliovirus vaccines are critical to reaching global poliovirus eradication goals. Recent efforts have focused on creating inactivated vaccines using attenuated Sabin strains that maintain patient safety benefits and immunogenicity of conventional inactivated vaccines while increasing manufacturing safety and lowering production costs, and on developing novel oral vaccines using modified Sabin strains that provide critical mucosal immunity but are further attenuated to minimize risk of reversion to neurovirulence. In addition, there is a push to improve the analytical tools for poliovirus vaccine characterization. Conventional and Sabin inactivated poliovirus vaccines typically rely on standard plate-based ELISA as in vitro D-antigen potency assays in combination with WHO international standards as calibrants. While widely utilized, the current D-antigen ELISA assays have a long time to result (up to 72 h), can suffer from lab-to-lab inconsistency due to non-standardized protocols and reagents, and are inherently singleplex. For D-antigen quantitation, we have developed the VaxArray Polio Assay Kit, a multiplexed, microarray-based immunoassay that uses poliovirus-specific human monoclonal antibodies currently under consideration as standardized reagents for characterizing inactivated Sabin and Salk vaccines. The VaxArray assay can simultaneously quantify all 3 poliovirus serotypes with a time to result of less than 3 h. Here we demonstrate that the assay has limits of quantification suitable for both bioprocess samples and final vaccines, excellent reproducibility and precision, and improved accuracy over an analogous plate-based ELISA. The assay is suitable for adjuvanted combination vaccines, as common vaccine additives and crude matrices do not interfere with quantification, and is intended as a high throughput, standardized quantitation tool to aid inactivated poliovirus vaccine manufacturers in streamlining vaccine development and manufacturing, aiding the global polio eradication effort.

•

Multiplexed D-antigen immunoassay for all 3 poliovirus serotypes

•

Has <3 h time to result and compares well to 3-day plate-based ELISA

•

Assay shows high specificity and is reactive to sIPV, cIPV, and OPV

•

Applicable to in-process samples, final IPV and combination vaccine formulations

•

High accuracy and precision for both sIPV and cIPV over multiple users and days

Immunochemical and Biophysical Characterization of Inactivated Sabin Poliovirus Products: Insights into Rapid Quality Assessment Tools

The aim of this study was to demonstrate the strength of combining immunochemical and biophysical analysis tools for assessing the quality of Sabin inactivated poliovirus vaccine (Sabin-IPV) bulk products. We assessed Sabin-IPV serotypes 1, 2 and 3 from six different manufacturers and evaluated their comparability through biosensor analysis and biophysical characterization methods, including tryptophan fluorescence and asymmetrical flow field-flow fractionation - multi-angle light scattering analysis. These methods enabled us to assess antigenic as well as conformational and structural integrity profiles, respectively. Based on Sabin-IPV samples that were subjected to accelerated storage conditions, we revealed that existing immunochemical methods exhibit remarkably similar trends to the results obtained by the biophysical characterization methods. While the results underpin that the comparability of Sabin-IPV bulk products of different manufacturers is poor, information about their quality can rapidly be obtained by using both immunochemical and biophysical methods. Furthermore, the study highlights that quality assessment of Sabin-IPV can be obtained through biophysical techniques can complement the assessments performed with monoclonal antibodies and suggests that similar techniques could be employed to characterize other enteroviruses.

Sixteen capillary electrophoresis applications for viral vaccine analysis

A broad range of CE applications from our organization is reviewed to give a flavor of the use of CE within the field of vaccine analyses. Applicability of CE for viral vaccine characterization, and release and stability testing of seasonal influenza virosomal vaccines, universal subunit influenza vaccines, Sabin inactivated polio vaccines (sIPV), and adenovirus vector vaccines were demonstrated. Diverse CZE, CE-SDS, CGE, and cIEF methods were developed, validated, and applied for virus, protein, posttranslational modifications, DNA, and excipient concentration determinations, as well as for the integrity and composition verifications, and identity testing (e.g., CZE for intact virus particles, CE-SDS application for hemagglutinin quantification and influenza strain identification, chloride or bromide determination in process samples). Results were supported by other methods such as RP-HPLC, dynamic light scattering (DLS), and zeta potential measurements. Overall, 16 CE methods are presented that were developed and applied, comprising six adenovirus methods, five viral protein methods, and methods for antibodies determination of glycans, host cell-DNA, excipient chloride, and process impurity bromide. These methods were applied to support in-process control, release, stability, process- and product characterization and development, and critical reagent testing. Thirteen methods were validated. Intact virus particles were analyzed at concentrations as low as 0.8 pmol/L. Overall, CE took viral vaccine testing beyond what was previously possible, improved process and product understanding, and, in total, safety, efficacy, and quality.

Immunogenicity of two-dose and three-dose vaccination schedules with Sabin inactivated poliovirus vaccine in China: An open-label, randomized, controlled trial

BACKGROUND

We assessed immunogenicity of three-dose and two-dose immunization schedules with a Sabin-strain inactivated poliovirus vaccine (sIPV) produced by one Chinese vaccine manufacturer.

METHODS

This was an open label, randomized, controlled trial conducted in 16 vaccination clinics in Shandong province. Infants were allocated randomly to either a 3-dose study arm (sIPV administered at 2, 3, and 4 months of age) or a 2-dose arm (sIPV administered at 4 and 8-11 months of age). Poliovirus neutralizing antibodies were measured in sera collected prior to the first sIPV dose and one month after the last dose.

FINDINGS

We enrolled 560 infants; 536 (95.7%) completed the study. Final seropositivity rates were >98% for all three serotypes in both study arms. There were no statistically significant differences in seropositivity between the 2-dose and the 3-dose schedule. Final median reciprocal titres of polio antibodies were high overall (>1:768 for all serotypes) and statistically significantly higher in 2-dose recipients compared with 3-dose recipients (p < 0.001).

INTERPRETATION

This study offers evidence that two doses of sIPV administered at 4 and 8-11 months of age and three doses of sIPV administered at 2, 3, and 4 months of age both provide serological protection against poliomyelitis. Median reciprocal titres of polio antibodies were high overall, and were more related to the interval between doses than the number of doses, with the longer interval of the 2-dose schedule producing higher reciprocal titres than the shorter-interval 3-dose schedule. The protection provided by the 3-dose schedule is achieved earlier in life than the protection with the 2-dose schedule. Countries planning to use an IPV-only schedule in the post-eradication era can consider this 2-dose sIPV option as an immunogenic and dose-sparing strategy.

FUNDING

World Health Organization (from a grant from International PolioPlus Committee, Rotary International, Evanston, IL, USA).

Human IgA Monoclonal Antibodies That Neutralize Poliovirus, Produced by Hybridomas and Recombinant Expression

Poliovirus (PV)-specific intestinal IgAs are important for cessation of PV shedding in the gastrointestinal tract following an acute infection with wild type or vaccine-derived PV strains. We sought to produce IgA monoclonal antibodies (mAbs) with PV neutralizing activity. We first performed de novo IgA discovery from primary human B cells using a hybridoma method that allows assessment of mAb binding and expression on the hybridoma surface: On-Cell mAb Screening (OCMS™). Six IgA1 mAbs were cloned by this method; three potently neutralized type 3 Sabin and wt PV strains. The hybridoma mAbs were heterogeneous, expressed in monomeric, dimeric, and aberrant forms. We also used recombinant methods to convert two high-potency anti-PV IgG mAbs into dimeric IgA1 and IgA2 mAbs. Isotype switching did not substantially change their neutralization activities. To purify the recombinant mAbs, Protein L binding was used, and one of the mAbs required a single amino acid substitution in its κ LC in order to enable protein L binding. Lastly, we used OCMS to assess IgA expression on the surface of hybridomas and transiently transfected, adherent cells. These studies have generated potent anti-PV IgA mAbs, for use in animal models, as well as additional tools for the discovery and production of human IgA mAbs.