Does mobile-bearing knee arthroplasty motion change with activity?

Mobile-bearing total knee arthroplasty implants combined with surface cementation produced satisfactory clinical and radiographic outcomes at the 5-year follow-up

PURPOSE

Very little is known about the use of combined surface cementation (only tibial tray) and mobile-bearing tibial components in total knee arthroplasty (TKA). This study was investigated whether the index combinations show satisfactory clinical outcomes after mobile-bearing TKA using posterior cruciate ligament (PCL)-retaining meniscal-bearing (MB) and PCL-substituting rotating-platform (RP) TKA designed using different anteroposterior constraints.

METHODS

This study is a retrospective evaluation of a prospective database. Five-year postoperative clinical outcomes were assessed in 127 patients (127 knees) and 122 patients (122 knees) who underwent TKA with an MB and RP design, respectively. The Hospital for Special Surgery (HSS) score, range of motion, loosening/radiolucency, and subsidence around both components were evaluated in the two designs.

RESULTS

The postoperative median HSS score was excellent in both the MB and RP groups (93 and 92, respectively). Postoperative flexion and extension did not differ between the two designs. Neither design showed > 2-mm radiolucencies raising concern for femoral or tibial implant stability. Five (2%) of 249 patients (5 knees) (MB, n = 4; RP, n = 1) showed detectable subsidence of the tibial component. However, no revision TKA had been performed by the 5-year follow-up because no patients had complaints severe enough to necessitate revision surgery.

CONCLUSIONS

Clinically good outcomes comparable with previous studies were obtained 5 years after mobile-bearing TKA with surface cementation using both MB and RP implant designs. Thus, equivalent mid-term clinical outcomes of the index combination can be obtained with other implant designs and cementation techniques.

LEVEL OF EVIDENCE

Level II.

Insall-Salvati ratio stabilizes one year after mobile-bearing total knee arthroplasty and does not correlate with mid-to-long-term clinical outcomes

PURPOSE

It has not been established whether changes in the length of the patellar tendon (LPT) after total knee arthroplasty (TKA) affect clinical outcomes. Therefore, this prospective cohort study aimed to evaluate changes in the LPT over time postoperatively and clarify their impact on clinical outcomes after bilateral TKA, performed with differently designed mobile-bearing (meniscal-bearing and rotating-platform) implants on contralateral knees.

METHODS

51 patients who required staged bilateral mobile-bearing TKA were recruited. LPT was evaluated by measuring the Insall-Salvati ratio (ISR) preoperatively and at 1 week, 6 months, and 1, 2, and ≥ 5 years postoperatively. Hospital for Special Surgery score and range of motion were assessed at the final follow-up.

RESULTS

Based on the ISR, there were no differences in the patterns of change between the two types of implant (n.s.). At the 6-month follow-up, the ISRs of both implants had significantly decreased (p = 0.002). Throughout the follow-up, the ISR was significantly lower (p < 0.001) for the meniscal-bearing knees than for the rotating-platform knees. After the 1-year follow-up, there were no further substantial changes in the ISR in either group. There was also no significant correlation between the ISR and clinical outcomes.

CONCLUSIONS

LPT decreased after both mobile-bearing TKAs for up to 1 year postoperatively, although the decrease was more significant for the meniscal-bearing knees than the rotating-platform knees. After 1 year postoperatively, however, these conditions had stabilized, with no further changes. Thus, LPT plays a minimal role in mid-to-long-term clinical outcomes after TKA.

LEVEL OF EVIDENCE

Therapeutic prospective study, Level II.

Tibial component coverage and rotational alignment accuracy after mobile-bearing total knee arthroplasty

BACKGROUND

Tibial component coverage (TCC) and tibial rotational angle (TRA) have been studied simultaneously in simulations, but not in clinical studies after total knee arthroplasty (TKA). The purposes of this study were (1) to evaluate TCC and rotational setting postoperatively in mobile-bearing TKA patients and (2) to compare the results with previously published simulation data.

METHODS

We prospectively examined 100 patients who underwent primary TKA using the LCS^® Total Knee System (LCS) posterior cruciate ligament-substituting prosthesis. Clinical outcomes, TCC (coverage area of the tibial component over the tibia), and TRA (relative to the femoral transepicondylar axis (TEA)) were assessed. Quantitative three-dimensional computed tomography was used to assess TCC and TRA. All values are expressed as median (25th percentile, 75th percentile) using minus (-) for internal and plus (+) for external rotation.

RESULTS

Hospital for Special Surgery scores improved from 46 (36, 50) preoperatively to 92 (90, 92) postoperatively. TRA showed a median divergence of - 2.0° (- 4.75°, + 2.74°). All knees were located within 10° of the TEA (range - 10.0° to + 9.7°). The median TCC of the knees was 82.7% (80.6, 84.7%), and there were no knees that hung over the tibial component in any direction.

CONCLUSIONS

The LCS prosthesis had good clinical outcomes, comparable TCC, and improved TRA as compared to previous reports, as all knees were located within 10° of the TEA. Simultaneous optimization of both TCC and TRA may contribute to the excellent long-term outcomes that have been observed with this system.

LEVEL OF EVIDENCE

Level II, Prognostic study.

Patellar tendon length during knee flexion of meniscal-bearing and rotating total knee arthroplasty implants

PURPOSE

The length of the patellar tendon after total knee arthroplasty (TKA) has most commonly been compared with preoperative measurements. However, there are no reports that discuss changes in the length of the patellar tendon during knee flexion after TKA. The purpose of this study was to evaluate changes in the length of the patellar tendon during knee flexion and to clarify the impact of changes in patellar tendon strain on the length of the patellar tendon and post-operative range of motion (ROM) after TKA.

METHODS

Thirty-six patients undergoing sequential bilateral TKA for osteoarthritis were evaluated. Patients received a meniscal-bearing (MB) implant on one side and a rotating platform (RP) implant on the other and were followed for a median of 115 months (range 60-211 months). The lengths of the patellar tendon at maximum extension, 30°, 60°, 90° and maximum flexion were measured, and the post-operative ROM of both knees were assessed. The effects of implant design and the knee flexion angle on the length of the patellar tendon were analysed using a linear mixed-effects model. The relationship between patellar tendon strain and post-operative knee ROM was assessed using Pearson's correlation coefficients.

RESULTS

Post-operative clinical scores were similar for MB and RP implants. Neither the implant design nor the knee flexion angle significantly affected the length of the patellar tendon. The ROMs in the two designs at final follow-up were equivocal (114° in MB, 113° in RP). There was no correlation between patellar tendon strain and ROM in knees with either implant type.

CONCLUSIONS

Patellar tendon lengths after mobile-bearing TKA with implants that permitted different anteroposterior constraints were relatively constant at varying degrees of knee flexion. Differences in patellar tendon strain may not impact ROM. These results provide conclusive evidence that the quality of the patellar tendon may play a less important role in ROM after TKA.

LEVEL OF EVIDENCE

Therapeutic study, Level II.

Changes in knee shape and geometry resulting from total knee arthroplasty

Changes in knee shape and geometry resulting from total knee arthroplasty can affect patients in numerous important ways: pain, function, stability, range of motion, and kinematics. Quantitative data concerning these changes have not been previously available, to our knowledge, yet are essential to understand individual experiences of total knee arthroplasty and thereby improve outcomes for all patients. The limiting factor has been the challenge of accurately measuring these changes. Our study objective was to develop a conceptual framework and analysis method to investigate changes in knee shape and geometry, and prospectively apply it to a sample total knee arthroplasty population. Using clinically available computed tomography and radiography imaging systems, the three-dimensional knee shape and geometry of nine patients (eight varus and one valgus) were compared before and after total knee arthroplasty. All patients had largely good outcomes after their total knee arthroplasty. Knee shape changed both visually and numerically. On average, the distal condyles were slightly higher medially and lower laterally (range: +4.5 mm to −4.4 mm), the posterior condyles extended farther out medially but not laterally (range: +1.8 to −6.4 mm), patellofemoral distance increased throughout flexion by 1.8–3.5 mm, and patellar thickness alone increased by 2.9 mm (range: 0.7–5.2 mm). External femoral rotation differed preop and postop. Joint line distance, taking cartilage into account, changed by +0.7 to −1.5 mm on average throughout flexion. Important differences in shape and geometry were seen between pre-total knee arthroplasty and post-total knee arthroplasty knees. While this is qualitatively known, this is the first study to report it quantitatively, an important precursor to identifying the reasons for the poor outcome of some patients. Using the developed protocol and visualization techniques to compare patients with good versus poor clinical outcomes could lead to changes in implant design, implant selection, component positioning, and surgical technique. Recommendations based on this sample population are provided. Intraoperative and postoperative feedback could ultimately improve patient satisfaction.

Anteroposterior translation and range of motion after total knee arthroplasty using posterior cruciate ligament-retaining versus posterior cruciate ligament-substituting prostheses

PURPOSE

It is still controversial whether anteroposterior (AP) translation magnitude after total knee arthroplasty (TKA) affects clinical outcomes, particularly range of motion (ROM). This study examined the following two questions: (1) are AP translations at the mid- and long-term follow-up different for knees within the same patient treated with posterior cruciate ligament-retaining (PCLR) versus posterior cruciate ligament-substituting (PCLS) mobile-bearing TKA prosthesis designs? (2) Is the ROM at the mid- and long-term follow-up for knees treated with PCLR and PCLS designs correlated with the AP translation?

METHODS

Thirty-seven patients undergoing sequential bilateral TKA for osteoarthritis were prospectively enrolled. Patients received a PCLR implant in one knee and a PCLS implant in the other and were followed-up for an average 9.8 ± 3.2 years. The AP translations at 30° and 75° of knee flexion and the ROM of both knees were assessed.

RESULTS

The implant design (p < 0.001), but not flexion angle (n.s.), had a significant effect on AP translation. AP translation values were larger in PCLR knees than in PCLS knees at both flexion angles (p < 0.0001). The ROM at the final follow-up in the two implant designs was similar (both 115°, n.s.). There was a weak correlation between ROM and AP translation at 30° in the PCLR knees (r = 0.397, p = 0.015), but no correlation at 75° or in the PCLS knees.

CONCLUSIONS

Differently constrained prosthesis designs resulted in significantly different AP translational values within the same patient. This indicates that achieving good clinical outcomes and ROM after TKA may not be strongly influenced by the specifics of each patient's anatomical characteristics, but instead by knee constrainment. Clinically, this means that surgeons should familiarize themselves with the AP translation of the implant being used, as this may be the most important factor for optimizing outcomes after mobile-bearing TKA. Level of evidence II, prospective, comparative study.

Association between body weight and proximal tibial bone mineral density after bilateral total knee arthroplasty

BACKGROUND

Proximal tibial bone mineral density (BMD) has been studied for its potential impact on subsidence and loosening of the tibial component after total knee arthroplasty (TKA). However, no known studies of proximal tibial BMD after TKA have evaluated the effect of major impact factors such as body weight (BW), muscle strength, and level of activity. We aim to determine whether factors such as level of activity, quadriceps strength, BW, gender, age, and prosthetic design affect proximal tibial BMD over the mid- to long-term following TKA.

METHODS

We evaluated 36 patients (72 knees) who were undergoing bilateral TKA performed by a single surgeon. Median follow up time was 115months (range, 60-211months) for a minimum of five years. We measured BMD in the proximal tibia and used a hand-held dynamometer to measure quadriceps isometric strength, recording the maximum value of three measurements for each patient.

RESULTS

Univariate analyses using Spearman's correlation coefficient for continuous variables revealed a weak negative correlation between age and BMD (r=-0.316, P=0.007) and a moderate positive correlation between BW and BMD (r=0.430, P<0.001). However, no significant correlations were found between the other factors above and BMD for continuous and discrete variables. Based on multivariate analyses, only BW had a significant effect on BMD (β=0.342, P=0.003).

CONCLUSIONS

BW is the most impact factor on the proximal tibial BMD after mid- to long-term follow up TKA. Therefore, the management of BW may contribute to prevention of decline of tibial BMD for TKA patients owing to aging.

Posterior Cruciate Ligament Retention or Substitution During Total Knee Arthroplasty Does Not Affect Long-Term Bone Mineral Density or Quality

BACKGROUND

Physical activity is recognized as one of the factors that influence bone mineral density (BMD) and bone quality after total knee arthroplasty (TKA). According to biomechanical analyses after posterior cruciate ligament (PCL) retaining (PCLR) and substituting (PCLS) TKA, each implant design has different kinematics and kinetics. The purposes of this study were: (1) to perform within-patient comparisons of the midterm and long-term effects of PCL retention in mobile-bearing TKA on proximal femur and tibia BMD and calcaneus bone quality measured using ultrasound and (2) to identify correlations between them.

METHODS

A prospective, quasi-randomized design was used. Thirty-seven patients (74 knees) who underwent bilateral TKA (PCLR on one side and PCLS on the other) were evaluated. Mean follow-up periods were 118 months (standard deviation 40) and 117 months (standard deviation 36) in knees with PCLR and PCLS implants, respectively. The BMDs of the total hip and proximal tibia and broadband ultrasound attenuation (BUA; dB/MHz) through the calcaneus were measured.

RESULTS

The mean BMD of PCLR and PCLS were equivalent at the proximal hip and tibia. The BUA of the calcaneus was also the same between implants. There were significant correlations between the 3 anatomic sites.

CONCLUSION

When measured approximately 10 years after TKA, PCL retention had no substantial effect on the BMD of the proximal femur and tibia, or on the bone quality of the calcaneus. The measurement of noninvasive BUA may predict BMD, although further analysis is required.

Changes in knee kinematics following total knee arthroplasty

Total knee arthroplasty (TKA) changes the knee joint in both intentional and unintentional, known and unknown, ways. Patellofemoral and tibiofemoral kinematics play an important role in postoperative pain, function, satisfaction and revision, yet are largely unknown. Preoperative kinematics, postoperative kinematics or changes in kinematics may help identify causes of poor clinical outcome. Patellofemoral kinematics are challenging to record since the patella is obscured by the metal femoral component in X-ray and moves under the skin. The purpose of this study was to determine the kinematic degrees of freedom having significant changes and to evaluate the variability in individual changes to allow future study of patients with poor clinical outcomes. We prospectively studied the 6 degrees of freedom patellofemoral and tibiofemoral weightbearing kinematics, tibiofemoral contact points and helical axes of rotation of nine subjects before and at least 1 year after total knee arthroplasty using clinically available computed tomography and radiographic imaging systems. Normal kinematics for healthy individuals were identified from the literature. Significant differences existed between pre–TKA and post–TKA kinematics, with the post-TKA kinematics being closer to normal. While on average the pre–total knee arthroplasty knees in this group displayed no pivoting (only translation), individually only five knees displayed this behaviour (of these, two showed lateral pivoting, one showed medial pivoting and one showed central pivoting). There was considerable variability postoperatively as well (five central, two lateral and two medial pivoting). Both preop and postop, flexion behaviour was more hinge-like medially and more rolling laterally. Helical axes were more consistent postop for this group. An inclusive understanding of the pre–TKA and post–TKA kinematics and changes in kinematics due to total knee arthroplasty could improve implant design, patient diagnosis and surgical technique.

Rotational alignment of tibial components in mobile-bearing TKA: posterior substituted vs. PCL retaining

PURPOSE

The medial border of the tibial tubercle (MBTT) is one of the fixed anatomic landmarks for tibial component setting during total knee arthroplasty (TKA). In mobile-bearing TKA using a tibial cut first technique, the final tibial component rotation can be guided by the position it achieves following several flexion-extension cycles. In this study, tibial component angle (TCA) and tibial rotational angle (TRA) were determined in dependence of retention or resection of the posterior cruciate ligament (PCL).

METHODS

The TCA and TRA were examined in 206 patients who underwent primary TKA (PCL retaining: 104 knees, PCL substituting: 102 knees). The tibial component rotation was intraoperatively setting between the parallel to the axis of the most medial aspect of the tibial tubercle as the anterior anatomic landmark and the center of the tibial component as the posterior landmark at the maximum coverage with the osteotomized tibial plateau with its adjustment after several knee flexion-extension exercises. A postoperative quantitative three-dimensional computed tomography technique was used for measurements by a single observer.

RESULTS

The TCA showed a divergence of 0.21° external to the MBTT in the PCL-retaining design and 1.62° internal divergence in the PCL-substituting design. The TRA showed an internal divergence of 0.88° in the PCL-retaining design and an internal divergence of 2.12° in the PCL-substituting design. There were no significant differences between the two designs.

CONCLUSIONS

The MBTT might be regarded as a reliable landmark for obtaining an acceptable tibial rotational setting in mobile-bearing TKA despite PCL retention.