Mid- to long-term survivorship of oxidised zirconium total knee replacements performed in patients under 50years of age

Fifteen-year survival analysis of an oxidised zirconium total knee arthroplasty

BACKGROUND

Early studies have found Oxidised Zirconium (OxZr-Nb) total knee arthroplasties to have a low incidence of failure in young, high demand patients. Theoretically this is because they are low friction and hard wearing. However, there are a paucity of studies reporting on the outcome of these implants beyond ten years. The purpose of our study was to present an in-depth 15-year survival analysis of a cemented OxZr-Nb knee arthroplasty.

METHODS

Data was collected prospectively and survival analysis undertaken with multiple strict end-points. Complication rates and patient reported outcomes were measured post-operatively.

RESULTS

Six hundred and seventeen knee arthroplasties were analysed. Forty-nine patients required a reoperation for various reasons. Aseptic tibial loosening was the most common cause of failure (32.7%), occurring, on average, 2.8 years after the primary procedure. There was only one oxidised zirconium femoral failure recorded. Cumulative survivorship for reoperation for any reason was 91.52% at 15-years. On average, WOMAC (Western Ontario and McMaster University) score improved by 21.2 points at one-year post-surgery, which is beyond the considered minimum clinically important difference.

CONCLUSION

This study presents a 15-year survival analysis of a cemented oxidised zirconium knee arthroplasty showing good survivorship over a range of analyses.

Total Knee Arthroplasty in Haemophilia: Long-Term Results and Survival Rate of a Modern Knee Implant with an Oxidized Zirconium Femoral Component

(1) Background: Total Knee Arthroplasty (TKA) in patient with haemophilia (PWH) has usually been performed with the use of cobalt-chrome femoral and titanium tibial components, coupled with standard polyethylene (PE) inserts. The aim of this retrospective study was to evaluate the long-term outcomes and survival rates of TKA in a series of consecutive PWH affected by severe knee arthropathy at a single institution. (2) Methods: We followed 65 patients undergoing 91 TKA, implanted using the same implant, characterized by an oxidized zirconium femoral component, coupled with a titanium tibial component, and a highly crosslinked PE. At 1, 6, and 12 months; then every year for 5 years; and finally, every other 3 years, all patients were scored for pain (VAS), function (HJHS; KSS), ROM, and radiographic changes. Kaplan-Meier survivorship curves were used to calculate the implant survival rates. (3) Results: The mean follow-up was 12.3 years (4.2-20.6). All clinical and functional scores improved significantly from preoperatively to the latest follow-up (VAS: from 6.9 to 1.3; HJHS: from 13.4 to 1.9; KSS: from 19.4 to 79; ROM: from 42.4° to 83.6°). The overall survivorship of the implants was 97.5% at the latest follow-up. (4) Conclusions: The present series showed a high survival rate of specific implants potentially linked to the choice of an oxidized zirconium coupled with a highly crosslinked PE. We promote the use of modern implants in these patients in order to ensure long-lasting positive outcomes.

Short-Term functional comparison of three total knee arthroplasties-Journey II, Genesis II and Profix

AIM OF THE STUDY

To compare the outcomes of three knee arthroplasty design philosophies and surface tribology.• A zirconium-surfaced, bicruciate-stabilised implant designed to mimic kinematic movement and improve flexion and outcomes;• A cobalt-chrome surfaced, multi-radius design with built-in femoral external rotation to aid balancing and patella tracking through a deeper trochlea groove;• A zirconium-surfaced, single-radius implant designed on surface conformity, particularly within the patello-femoral joint.

METHODS

313 knee replacements - 103 Journey II, 103 Genesis II and 107 Profix - were statistically assessed at a minimum of 2 years using WOMAC, Oxford and SF-12 scores, and range of movement.

RESULTS

There was no difference between the actual or unit change in WOMAC scores (p = 0.140 and p = 0.287), SF-12 physical (p = 0.088) or mental scores (p = 0.975) between the three implants; or between the actual or unit change in Oxford score (p = 0.912 and p = 0.874) for the Journey II or Genesis II. The Journey II produced more flexion and range of movement than the Genesis II (p < 0.001 and p = 0.018) and Profix (p < 0.001 and <0.001) with no difference between the latter two (p = 0.402 and 0.568); with no difference in extension between the three implants (p = 0.086). There was no difference between those with or without a resurfaced patella.

CONCLUSION

The three design philosophies and surfaces yielded no difference in outcome scores at 2 years post-operatively. The Journey II demonstrated better post-operative flexion. Resurfacing the patella did not alter the outcome scores or flexion.

Metal wear debris generation in primary total knee arthroplasty: is it an issue?

More durable total knee arthroplasties (TKAs) are needed, due to the rising life expectancy, the higher activity levels of patients and the growing concerns about aseptic loosening being caused by metal hypersensitivity. In response, different hypoallergenic metal coatings have been developed for TKAs. However, possible adverse effects of these different metals (cobalt-chromium-molybdenum, zirconium, titanium and tantalum) have been neglected. The aim was to summarize the local and systemic adverse effects (including metal hypersensitivity), survival ratios, patient-reported outcome measures (PROMs) and the plasma metal ion concentrations of the different TKA coatings. A literature search on PubMed and EMBASE was performed. In total, 15 studies were found eligible. Common adverse effects of TKA were infection, loosening, pain, instability and hyper- coagulation disorders. Serious adverse effects related to TKA implants were not reported. The survival ratios and patient-reported outcome measures seem to confirm these good results. In contrast with chromium and cobalt, no significant differences were reported in the nickel, molybdenum and titanium concentrations. No significant differences between the hypoallergenic and standard TKA implants were found in terms of adverse effects, survival ratios and PROMs. A causal relationship between the common adverse effects and the different metals is unlikely. Due to the heterogeneity of the TKA implants used, no firm conclusions could be made. Further research with longer follow-up studies are needed to find possible adverse effects and differences. Thus far, the hypoallergenic implants seem to perform equal to the standard implants.

[Total knee arthroplasty in the young patient-an update]

The absolute number of total knee arthroplasties (TKA) continues to rise every year. About 10% of the patients are less than 55 years of age, although it is known that functional results and patient satisfaction are lower combined with an increased likelihood of revision compared to older patients. Higher physical activity and patient expectations are a major challenge in this age group. At the same time, the incidence of posttraumatic/postoperative alterations is high, including ligamentous or bony deficiencies, which can make the surgical procedure challenging. In view of these facts conservative treatments and joint sparing procedures should always be considered first. The potential correction of lower-limb deformities and unicompartmental knee arthroplasties need to be carefully evaluated before considering total knee arthroplasty. Only in advanced cases of osteoarthritis in more than one compartment of the knee of with combined ligamentous instability, can a TKA provide satisfactory results in the young patient. However, the strongest predictor of satisfaction is a realistic expectation.

Outcome reporting patterns in total knee arthroplasty: A systematic review

BACKGROUND

Total knee arthroplasty (TKA) is one of the most effective ways to treat end-stage painful conditions of the knee. However, non-standardized reporting patterns can make quantitative analysis of patient outcomes difficult.

METHODS

A systematic review of the literature was performed using keywords "total knee arthroplasty" and "total knee replacement." Randomized controlled trials (RCTs) meeting the inclusion criteria were sorted and reviewed. Type of study, outcome measures used to report their results, and the actual results were recorded. Quantitative analysis was performed.

RESULTS

A total of 233 RCTs were included. There was significant variability in the reporting of short term and long term outcomes in total knee arthroplasty. The most common treatment domains in order of decreasing frequency were objective knee function, subjective knee function, perioperative complications, and pain. Range of motion was the most common outcome metric reported in all the RCTs and also was the most common metric used to assess objective knee function. The most common patient reported outcome measure used to assess postoperative function was the Knee Society Score followed by Knee Injury and Osteoarthritis Outcome Score. The Visual Analog Scale was the most common measurement tool used to assess postoperative pain. Most studies assessed patient outcomes in three treatment domains. None reported outcomes in all seven domains.

CONCLUSION

There is significant variability in outcome reporting patterns in TKA literature. Most studies do not track outcomes comprehensively, with a significant minority of the RCTs tracking outcomes in only one treatment domain.

Projective geometric model for automatic determination of X-ray-emitting source of a standard radiographic system

BACKGROUND AND OBJECTIVE

Currently, many orthopedic operations are planned by analyzing X-rays. The exact position of the focus is needed to calculate the real size of an object that is represented in conical projection, although in practice, this position is difficult to determine using current X-ray commercial systems. In this paper, a new geometric model is proposed in order to determine accurately, practically, and economically the location of the emitting source of commercial imaging systems using a single standard X-ray image.

METHOD

The method requires a specific reference locator object to be positioned in the visual field of radiographic image. Because this object cannot implement ideal geometric points, but instead works with small spheres, it was necessary to experimentally validate the proposed methodology. The implemented software that was developed to validate the model was used in four series of tests. In these tests, we studied the influence on the final result of: 1. the selection of a specific set of markers in radiography, 2. the focus position variation in relation to radiograph and 3. the possible rotated angle of locator object about Z axis.

RESULTS

The results for 164 tests that were performed with this software showed that the expected error for 99.5% of values ranges with maximum error of [-0.35%, +0.39%], which shows that the model is independent of the design of locator object and its position and orientation in the radiographic field. The software used to validate the proposed model has been found useful to verify its reliability, effectiveness, ease of implementation, and accuracy.

CONCLUSIONS

This model is effective to calculate the precise position of the X-ray focus of any standard radiographic system accurately.