Principal components and factor analytic models for birth to mature weights in Nellore cattle

Genetic association between feed efficiency, growth, scrotal circumference, and carcass traits in Guzerat cattle

The objective of this study was to estimate the genetic parameters for feed efficiency-related traits and their genetic correlations with growth, male fertility, and carcass traits using multi-trait analysis in Guzerat cattle. Further, it aimed to predict the direct and correlated responses for feed efficiency traits when selection was applied for growth, male fertility, and carcass traits. The evaluated traits were adjusted weight at 120 (W120), 210 (W210), 365 (W365), and 450 days of age (W450), adjusted scrotal circumference at 365 days of age (SC365) and at 450 days of age (SC450), scrotal circumference, ribeye area (REA), backfat thickness (BFT), rump fat thickness (RFT), residual feed intake (RFI), and dry matter intake (DMI). The genetic parameters were obtained by the restricted maximum likelihood method (REML), using an animal model in multi-trait analyses. The heritability estimates for W120, W210, W365, W450, SC365, and SC450 varied from low to high (0.17 to 0.39). The carcass traits, REA, BFT, and RFT, displayed low to moderate heritability estimates, 0.27, 0.10, and 0.31, respectively. The heritability estimates for RFI (0.15) and DMI (0.23) were low and moderate, respectively. The RFI showed low genetic correlations with growth traits, ranging from - 0.07 to 0.22, from 0.03 to 0.05 for scrotal circumference, and from - 0.35 to 0.16 for carcass, except for DMI, which ranged from 0.42 to 0.46. The RFI and DMI presented enough additive genetic variability to be used as selection criteria in Guzerat breed genetic improvement program. Additionally, the response to selection for RFI would be higher when selection is performed directly for this trait. The selection for residual feed intake would not promote unfavorable correlated responses for scrotal circumference, carcass (yield and finish), and growth traits. Therefore, the selection for more efficient animals would not compromise the productive, reproductive, and carcass performance, contributing to reduce the production costs, increasing the profitability and sustainability of beef cattle production in tropical areas.

Reduced rank analysis of morphometric and functional traits in Campolina horses

Multitrait models can increase the accuracy of breeding value prediction and reduce bias due to selection by using traits measured before and after it has occurred. However, as the number of traits grows, a similar trend is expected for the number of parameters to be estimated, which directly affects the computing power and the amount of data required. The aim of the present study was to apply reduced rank (principal components model-PCM) and factor analytical models (FAM), to estimate (co)variance components for nineteen traits, jointly evaluated in a single analysis in Campolina horses. A total of 18 morphometric traits (MT) and one gait visual score (GtS), along with genealogical records of 48,806 horses, were analysed under a restricted maximum likelihood framework. Nine PCM, nine FAM and one standard multitrait model (MTM) were fitted to the data and compared to find the best suitable model. Based on Bayesian information criterion, the best model was the FAM option, considering five common factors (FAM5). After performing an intraclass analysis, none of MT were genetically negatively correlated, whereas GtS was negatively related to all MT, except for the genetic correlations among GtS and BLL, and between GtS and BLLBL (0.01 and 0.10 respectively). From all MT, two traits were derived computing ratios involving other traits, those had negative correlations with others MT, but all favourable for selection. Similar patterns were observed between the genetic parameters obtained from MTM and FAM5 respectively. The heritability estimates ranged from 0.09 (head width) to 0.47 (height at withers). Our results indicated that FAM was efficient to reduce the multitrait analysis dimensionality, and therefore, traits can be combined based on the first three eigenvectors from the additive genetic (co)variance matrix. In addition, there was sufficient genetic variation for selection, benefiting its potential implementation in a breeding program.

Selection indexes using principal component analysis for reproductive, beef and milk traits in Simmental cattle

Selection indexes in dual-purpose cattle should include beef, milk and reproductive traits. The principal component analysis is a multivariate technique that allows researchers to explore relationships between explanatory variables and traits of interest. The objective of this study was to construct selection indexes for tropical dual-purpose Simmental cattle based on principal components. The evaluated traits were weight at 8 months of age; age at first calving; cumulative first-lactation milk yield at 60, 150, 210 and 305 days; and first calving interval. The selection indexes were estimated as the sum of the products of the estimated breeding values for the seven traits times their respective eigenvectors for the first three principal components. The three selection indexes from principal components analysis generated favourable expected genetic progress for all the traits. However, a selection index with a high expected genetic progress for all traits could not be obtained. The principal component analysis allows breeders to have a selection index that simultaneously improves milk, beef and reproductive traits in dual-purpose Simmental cattle. Because a selection index yielding high expected genetic progress for all traits could not be achieved, the decision to use a specific selection index will depend on the specific conditions of the market, the local needs and the farmer preference.

Genetic parameters and principal components analysis of breeding value for birth and weaning weight in Egyptian buffalo

OBJECTIVE

The objectives of the current study were to study the main environmental factors affecting birth weight (BW) and weaning weight (WW), estimate variance components, genetic parameters and genetic trend and to evaluate the variability and relationships among breeding value of BW and WW using principal components analysis (PCA).

METHODS

A total of 16,370 records were collected from 8,271 buffalo calves. Genetic parameters and breeding values were estimated using a bivariate animal model which includes direct, maternal and permanent maternal effects. These estimates were standardized and used in PCA.

RESULTS

The direct heritability estimates were 0.06 and 0.41 for BW and WW, respectively whereas direct maternal heritability values were 0.03 and 0.14, respectively. Proportions of variance due to permanent environmental effects of dam were 0.455 and 0.280 for BW and WW respectively. The genetic correlation between BW and WWs was weak approaching zero, but the maternal correlation was 0.26. The first two principal components (PC1 and PC2) were estimated utilizing the standardized breeding values according to Kaiser method. The total variance explained by the first two PCs was 71.17% in which 45.91% and 25.25% were explained by PC1 and PC2, respectively. The direct breeding values of BW were related to PC2 but those of WW and maternal breeding values of BW and WWs were associated with PC1.

CONCLUSION

The results of genetic parameters and PCA indicate that BW and WWs were not genetically correlated and improving growth traits of Egyptian buffaloes could be achieved using WW without any adverse effect by BW.

Genetic parameters for weights from birth to 10 years of age in different beef cow breeds

Context Most Brazilian beef breeding programs perform selection for young bodyweight, which will inevitably increase mature weight due to the genetic correlation among weights at different ages. Aims The objective of the present study was to estimate genetic parameters for bodyweight from birth to maturity in Gir, Guzerat, Nelore and Caracu cows born between 1981 and 2014 at Centro APTA Bovinos de Corte, Instituto de Zootecnia, Sertãozinho, São Paulo, Brazil. Methods The model included the fixed effects of contemporary group (herd and year of birth), month of birth and previous reproductive status (calved = 1, or not calved = 0), the linear and quadratic effects of animal and cow age as covariates, and direct additive genetic, maternal genetic and maternal permanent environmental effects as random effects. The genetic parameters were estimated by univariate analysis of weights adjusted at birth, and at 120, 210, 378, 450 and 550 days of age, and annually from 2 to 10 years. In addition, multivariate analysis was performed considering weights at birth, and at 210 and 550 days, and at 5 years of age for all breeds. Key results For the different breeds, the heritability estimates ranged from 0.28 to 0.49 for birthweight, from 0.11 to 0.31 for weaning weight, from 0.25 to 0.43 for yearling weight, and from 0.25 to 0.69 for weights from 2 to 10 years of age. The genetic correlations were high and positive, indicating that selection at any age will affect weights at the other ages. Conclusions The results suggest the possibility of genetic progress for weights at different ages and the use of the young weights to monitor the mature weight of the animals. Implications As the trait most strongly correlated with mature weight was yearling weight, already used as the selection criteria for females in the breeding program of the Instituto de Zootecnia, selection indexes should be derived to keep the mature cow weight constant, since heavier cows could be undesirable for pasture-based Brazilian production systems.

Genetic Evaluation of Dual-Purpose Buffaloes (Bubalus bubalis) in Colombia Using Principal Component Analysis

Genealogy and productive information of 48621 dual-purpose buffaloes born in Colombia between years 1996 and 2014 was used. The following traits were assessed using one-trait models: milk yield at 270 days (MY270), age at first calving (AFC), weaning weight (WW), and weights at the following ages: first year (W12), 18 months (W18), and 2 years (W24). Direct additive genetic and residual random effects were included in all the traits. Maternal permanent environmental and maternal additive genetic effects were included for WW and W12. The fixed effects were: contemporary group (for all traits), sex (for WW, W12, W18, and W24), parity (for WW, W12, and MY270). Age was included as covariate for WW, W12, W18 and W24. Principal component analysis (PCA) was conducted using the genetic values of 133 breeding males whose breeding-value reliability was higher than 50% for all the traits in order to define the number of principal components (PC) which would explain most of the variation. The highest heritabilities were for W18 and MY270, and the lowest for AFC; with 0.53, 0.23, and 0.17, respectively. The first three PCs represented 66% of the total variance. Correlation of the first PC with meat production traits was higher than 0.73, and it was -0.38 with AFC. Correlations of the second PC with maternal genetic component traits for WW and W12 were above 0.75. The third PC had 0.84 correlation with MY270. PCA is an alternative approach for analyzing traits in dual-purpose buffaloes and reduces the dimension of the traits.