Shelf life of linseeds and peanuts in relation to roasting

Influence of seed-roasting degree on quality attributes of sunflower oil

To facilitate the typical flavor of sunflower oil, seed roasting is widely applied. In this study, the effects of seed-roasting degree (160, 180, 200°C for 0-25 min) on the quality attributes of sunflower oil were assessed, particularly tocopherols, sterols, total phenolics, fatty acids, and triglycerides composition as essential compounds for the nutritional value of the sunflower oil. Roasting seeds at a high temperature can significantly raise oxidative stability by 1.5-1.8 times, the content of carotenoids by 2.0-5.5 times, chlorophyll by 7.5-17.0 times, as well as increase the browning index by 4.0-10.0 times and deepen the color of the sunflower oil. However, the fatty acid and triglyceride profiles of sunflower oils have little change under distinct seed-roasting degrees. Synthetically considering the various indicators measured in the current study. It is recommended that the seed roasts at 160-180°C for about 20 min to ameliorate the oxidative stability and quality. Practical Application: A well-defined roasting process is very important for the food industry to be able to produce sunflower oil with desirable nutrition, unique flavor produced by the Maillard reaction and chemical properties of sunflower oil, which changes during the roasting. Considering the flavor, peroxide values, oxidation stability, and other quality attributes of oil obtained from the roasted seed, we found that sunflower seed oil better quality is obtained when roasted at 160- -180°C for about 20 min (e.g., 160°C for 20-25 min or 180°C for 15-20 min).

Determination of Maximum Oil Yield, Quality Indicators and Absorbance Spectra of Hulled Sunflower Seeds Oil Extraction under Axial Loading

The present study aims to estimate the maximum oil yield of hulled sunflower seed samples in a uniaxial process under a load of 40 kN and speed of 4 mm/min. The oil samples were assessed for their quality parameters and spectra curves within the wavelength range of 325–600 nm. The results show that heating temperatures in the range of 40 °C to 80 °C increased the oil output; however, a maximum oil yield of 48.869 ± 6.023% with a minimum energy of 533.709 ± 65.644 J at the fifth repeated pressing was obtained from the unheated sample compared to the heated samples. The peroxide values ranged from 6.898 ± 0.144 to 7.290 ± 0.507 meq O₂/kg, acid values from 1.043 ± 0.166 to 1.998 ± 0.276 mg KOH/g oil and free fatty acid values from 0.521 ± 0.083 to 0.999 ± 0.138 mg KOH/g oil, which were within the recommended quality threshold. There were significant spectral differences among the oil samples. A single absorbance peak was observed at 350 nm for all oil samples, indicating low levels of pigment molecules in the oil. The study revealed the need for repeated pressings to recover the considerable residual oil remaining in the seedcake after the first pressing.

Application of OXITEST for Prediction of Shelf-Lives of Selected Cold-Pressed Oils

Introduction: Due to the enhanced awareness of consumers concerning healthy foods, homemade expeller-pressed oils have become popular worldwide. However, an extended storage period may lead to oxidization of the oil and exposure to hazardous byproducts by consumers.

Methods: In this study, 10 pressed oil samples prepared from common oilseeds using a small-scale expeller oil press were analyzed by OXITEST with a sample amount of 5 g of oil and an oxygen pressure of 800 kPa under accelerated conditions for shelf-life projections. The oil properties were investigated, including the recovery, smoke point, acid value, iodine value, “fatty acid composition, and contents of pigments and tocopherols”.

Results: The autoxidation reaction of various expeller-pressed oils under an accelerated testing system followed zero-order Arrhenius kinetics (R² > 0.99). Shelf-lives of the pressed oils at 25°C were estimated by extrapolation to range 105~1,089 days. The obtained shelf-lives were significantly correlated with log induction period (IP) values (r > 0.81, p < 0.05) and unsaturated fatty acids (UFAs) (r < −0.69, p < 0.05), but not with the iodine value, acid value, or smoke point. Scatter diagrams between shelf-lives and UFAs suggested that these pressed oils could be grouped by two linear regression curves (r > 0.98, p < 0.05). The predictive equations using multiple linear regression are presented herein, with predictor variables of UFAs and an unspecified item involving potential influencing factors such as tocopherol contents (r > 0.88, p < 0.05).

Conclusions: Our findings first revealed that the UFA portion was partially correlated with the shelf-lives of selected expeller-pressed seed oils as estimated by the OXITEST. The derived equations can be applied for shelf-life predictions of expeller-pressed oils stored under dark ambient conditions based on the fatty acid profile.

Effect of seed roasting on oxidative stability and antioxidant content of hemp seed oil

In this study, some chemical components of hemp seed, which widely consumed as snack food in Middle East were determined. The effects of different roasting temperatures (140, 160 and 180 °C) and times (0-60 min) on the oxidative stability and antioxidant content of hemp seed oil were investigated. Hemp seed oil contained high levels of linoleic acid (54.85%), α-linolenic acid (18.13%) and γ-tocopherol (707.47 mg/kg oil). While tocopherol isomers decreased with increasing roasting time and temperature, total phenolic content and antioxidant activity showed increasing trend. The peroxide and p-anisidine values of roasted samples varied from 1.33 to 3.09 meq O₂ /kg oil and 1.65 to 43.27, respectively. The peroxide and p-anisidine values of samples were simultaneously generated at the early stage of roasting. Kinetic evaluation of data showed that peroxides act as limiting factor in autocatalytic oxidation reactions. The order and rate constant regarding peroxide value were similar with those of p-anisidine value. The effects of roasting temperature and time on the oxidation parameters and antioxidant contents of samples were significant (p < 0.05). Based on peroxide and p-anisidine values, roasting at 140-160 °C for 35 min or at 180 °C for 15 min are recommended to provide good quality roasted hemp seed.

The Effect of Roasting on the Protein Profile and Antiradical Capacity of Flaxseed Meal

Roasting is more and more often used as a pre-treatment of flaxseeds. However, the process can influence flaxseed proteins that may be crucial for their properties. The aim of this research was to study changes in the electrophoretic protein profile (SDS-PAGE) and the antiradical capacity of flaxseed meals after roasting. The roasting temperature (160, 180, and 200 °C) and flaxseed cultivars (golden and brown seed) were factors including in the study. The free (F-MRP) and bound-to-protein (B-MRP) Maillard reaction products were also analyzed. The most significant changes in the SDS-PAGE protein profiles of roasted seeds of each of the tested flax cultivars were observed for the 13 kDa protein fraction (decrease) and for the 19 kDa and 17 kDa fractions (increase). The research revealed a significant correlation between the roasting temperature and B-MRP content, and changes in the percentage share of those three protein fractions. The antiradical capacity of roasted flaxseeds decreased, as compared with untreated seeds. After roasting at 200 °C the antiradical capacity of flaxseeds improved slightly, probably due to the MRP formation, but it was still significantly lower than that of the raw seeds. The research provides novel information about key protein fractions that seem to be important changing during heat treatment.

Oxidative Stability of Protease Treated Peanut with Reduced Allergenicity

Oxidative stability and allergenicity are two major concerns of peanuts. This study evaluated the impact of protease treatment of peanuts on its oxidative stability during storage. The raw and dry-roasted peanut kernels were hydrolyzed with Alcalase solution at pH 7.5 for 3 h. The contents of Ara h 1, Ara h 2, and Ara h 6 in peanuts were determined before and after enzyme treatment by a sandwich ELISA. After drying, the samples were packed in eight amber glass jars and stored at 37 °C for 1-8 weeks. Controls are untreated raw and dry-roasted peanuts packed and stored in the same way as their treated counterparts. Samples were taken biweekly to determine peroxide value (PV) and thiobarbituric acid reactive substances (TBARS) as indicators of oxidation (n = 3), and to determine antioxidant activity. Alcalase treatment reduced intact major allergens Ara h 1, Ara h 2, and Ara h 6 by 100%, 99.8%, and 85%, respectively. The PVs of Alcalase-treated raw and roasted peanuts was lower than those of untreated (p < 0.05) over the 8-week storage. The TBARS of Alcalase-treated raw peanuts were slightly higher than that of untreated (p < 0.05), but the TBARS of Alcalase-treated dry-roasted peanuts were slightly but significantly lower than that of untreated (p < 0.05). The protease treatment increased the antioxidant activities including reducing power, DPPH free radical scavenging capacity, and metal chelating capacity of peanuts.

Formation and Inhibition of Lipid Alkyl Radicals in Roasted Meat

Free radicals are ubiquitous in roasted foods. In this work, lipid-derived carbon-centered alkyl radical formation was first studied in roasted meat by electron spin resonance (ESR). The influence of antioxidants on the inhibition of free radicals was investigated. The results showed that the high temperature, high heat transfer rate, and high polyunsaturated fatty acid (PUFA) content resulted in high radical content in roasted meat, while the high water content in meat retarded radical formation. The 0.03% addition of tea polyphenols (TPP) significantly reduced radical formation during roasting (p < 0.05), whereas the 0.03% rosemary extract (RE) had no significant inhibitory effect (p > 0.05). These results suggested that water retention and the addition of TPP would decrease radical generation during the roasting of meat.

Effects of Multihollow Surface Dielectric Barrier Discharge Plasma on Chemical and Antioxidant Properties of Peanut

An experiment was conducted to investigate the effects of atmospheric pressure plasma generated by multihollow surface dielectric barrier discharge on chemical and antioxidant properties of peanut. Multihollow surface dielectric barrier discharge is a novel plasma device applicable in food industry applications due to the capacity of the generated plasma to treat the surface of food without changing the quality. Peanut seeds were exposed to the multihollow plasma for different plasma power (10–40 W), air flow rate (0.5–20 l/min), and time (1–15 min). The fatty acid profile, peroxide value, acid value, moisture content, total polyphenols, and antioxidant activity were evaluated during cold plasma treatment. The result revealed that, due to the variation plasma power, treatment time and air flow rate caused a decrease in unsaturated fatty acid and moisture content and increased saturated fatty acids, peroxide value, acid value, and total polyphenols of the peanut.

Effect of Roasting and Storage on the Formation of Maillard Reaction and Sugar Degradation Products in Hazelnuts ( Corylus avellana L.)

This study investigated the effect of roasting (150 °C for 30 min) and storage (12 months at 4 °C, 25 °C, and 25 °C in vacuum package), conditions of which are generally applied in the industry and markets, on the formation of Maillard reaction and sugar degradation products, namely dicarbonyl compounds, 5-hydroxymethylfurfural, N-ε-fructosyllysine, and N-ε-carboxymethyllysine in Tombul and Levant hazelnuts. Roasting increased all dicarbonyl compounds significantly ( p < 0.05). The concentration of methylglyoxal was the highest while 1-deoxyglucosone was the lowest in roasted hazelnuts. 5-Hydroxymethylfurfural and N-ε-carboxymethyllysine also increased significantly ( p < 0.05) with roasting while furosine decreased. Roasting changed the progress of the Maillard reaction from the early stage to the advanced stage. On the other hand, there were no significant changes ( p > 0.05) in the concentration of Maillard reaction and sugar degradation products independent of the storage conditions or time and hazelnut variety, except for glyoxal, diacetyl, and 1-deoxyglucosone. Therefore, neither 5-hydroxymethylfurfural nor furosine is suggested as a storage marker of the Maillard reaction and sugar degradation.

Changes in oxidative stability and protein profile of flaxseeds resulting from thermal pre-treatment

BACKGROUND

The oxidative stability of oilseeds is crucial for their technological/nutritional quality and shelf life. This research aimed to evaluate the effect of thermal pre-treatment (steaming and roasting under various time/temperature conditions) on flaxseed oil and protein stability. The monitoring of changes in oil oxidation in situ and protein profiles (SDS-PAGE) and analysis of the antiradical activity of ethanolic and aqueous fractions were included in the study.

RESULTS

Flaxseed stability during storage was considerably affected by thermal pre-treatment conditions. Dynamics of oil oxidation was accelerated at 160 °C and 180 °C but slowed at 200 °C. Influence of pre-treatment conditions on the antiradical activity of the aqueous fraction was clearly observed and no effect concerning the ethanolic fraction was found. The most significant changes in protein profile of 200 °C-roasted flaxseed were found with the observed disappearance of 19 kDa protein. A treatment-dependent decrease in the 13 kDa protein was also detected. Based on the aqueous extract protein profiles, roasting conditions were found to be crucial for protein extractability.

CONCLUSIONS

The study has broadened knowledge of the consequences of flaxseed thermal treatment. The deterioration of flaxseed oil oxidative stability is shown. The changes of 19 and 13 kDa proteins suggest their sensitivity to thermally induced aggregation and/or cross-link. © 2018 Society of Chemical Industry.

Optimization of oil extraction from giant bushel gourd seeds using response surface methodology

Gourd seeds have been identified as a source of edible oil, but there is sparse literature on the effect of processing factors on the characteristics of oil extracted from any Lagenaria spp. Optimization of oil extraction with the aid of expeller was achieved by applying response surface methodology. The variables were roasting temperature (87.70–172.0°C) and roasting duration (7.93–22.07 min), while the responses were oil yield and oil quality (free fatty acid, color, specific gravity, saponification value, moisture, and refractive index). Data obtained were analyzed at P < 0.05. Roasting conditions significantly influenced all the responses at P < 0.05. The optimum roasting condition was 100°C for 20 min, which gave 27.62% oil yield with good quality attributes (free fatty acid: 0.61%, color: 3.47 abs, specific gravity: 0.90 g/mL, saponification value: 289.66 mL, and refractive index: 1.47).

Color and texture of low-calorie peanuts as affected by a new oil extraction process named "Mechanical Expression Preserving Shape Integrity" (MEPSI)

The current healthy life style pushed to develop and implement a novel efficient defatting process of high quality called "Mechanical Expression Preserving Shape Integrity" that conserved the sensory, color, textural, morphological and acceptability of partially defatted roasted peanuts. In this study, Response Surface Methodology was used to investigate the best extraction parameters (initial water content, pressure and pressing duration) based on the highest Color Consumer Evaluation scores, the best colorimetric parameters (L*, a*, b*, ΔE*) and the most appealing textural attributes (Fracturability, First Fracture Work Done, First Fracture Percentage of Deformation, Rupture Force, Percentage of Deformation at Rupture). Experimental results showed that defatting promotes a lighter and neutral grain color, higher fracturability and rupture force as well as higher deformation strength. Aiming to retain most of the colorimetric and textural properties after defatting and roasting, it was found that peanuts should be hydrated to 7 % d.b. and treated at 4.74 MPa for 14.22 min.

Cashew Nut Quality as Influenced by Microwave Heating Used for Stored Grain Insect Control

The objective of this work is to investigate the effect of microwave power levels (240, 360, and 480 W) and exposure time (30, 60, 90, 120, 180, and 240 s) on various properties of cashew nuts being used for disinfestation. The nuts were analyzed for moisture content, temperature rise, colour, free fatty acid (FFA) and peroxide value (PV). Experiments were conducted according to the response surface methodology. Increase in microwave power level and exposure time caused a decrease in moisture content, increase in temperature, and change in colour. Microwave treatment to target temperatures of 50–55°C (unfavorable for insect survival) made the PV of cashew nut decrease to 1.10 to 1.66 meq O₂/Kg (from an initial value of 2.08 ± 0.05) and FFA value to 0.11 to 0.51% (from an initial value of 0.68 ± 0.03). Though PV and FFA values of microwave treated cashew nut were found to increase after 6 months of storage at room conditions, the values were within the limits for acceptable quality. Microwave treated cashew nuts were free from infestation and rancidity even after 6 months of storage while the untreated nuts were found to be heavily infested at the end of 1 month of storage.

Textural, rheological and sensory properties and oxidative stability of nut spreads&#8212;a review

Tree nuts are rich in macro and micronutrients, phytochemicals, tocopherols and phenolic compounds. The development of nut spreads would potentially increase the food uses of nuts and introduce consumers with a healthier, non-animal breakfast snack food. Nut spreads are spreadable products made from nuts that are ground into paste. Roasting and milling (particle size reduction) are two important stages for the production of nut spreads that affected the textural, rheological characteristic and overall quality of the nut spread. Textural, color, and flavor properties of nut spreads play a major role in consumer appeal, buying decisions and eventual consumption. Stability of nut spreads is influenced by its particle size. Proper combination of ingredients (nut paste, sweetener, vegetable oil and protein sources) is also required to ensure a stable nut spread product is produced. Most of the nut spreads behaved like a non-Newtonian pseudo-plastic fluid under yield stress which help the producers how to start pumping and stirring of the nut spreads. Similar to other high oil content products, nut spreads are susceptible to autoxidation. Their oxidation can be controlled by application of antioxidants, using processing techniques that minimize tocopherol and other natural antioxidant losses.

Gamma radiation induced oxidation and tocopherols decrease in in-shell, peeled and blanched peanuts

In-shell, peeled and blanched peanut samples were characterized in relation to proximate composition and fatty acid profile. No difference was found in relation to its proximate composition. The three major fatty acids were palmitic acid, oleic acid, and linoleic acid. In order to investigate irradiation and storage effects, peanut samples were submitted to doses of 0.0, 5.0, 7.5 or 10.0 kGy, stored for six months at room temperature and monitored every three months. Peanuts responded differently to irradiation, particularly with regards to tocopherol contents, primary and secondary oxidation products and oil stability index. Induction periods and tocopherol contents were negatively correlated with irradiation doses and decreased moderately during storage. α-Tocopherol was the most gamma radiation sensitive and peeled samples were the most affected. A positive correlation was found among tocopherol contents and the induction period of the oils extracted from irradiated samples. Gamma radiation and storage time increased oxidation compounds production. If gamma radiation is considered an alternative for industrial scale peanut conservation, in-shell samples are the best feedstock. For the best of our knowledge this is the first article with such results; this way it may be helpful as basis for future studies on gamma radiation of in-shell crops.