Gallic acid microparticles produced by spray chilling technique: Production and characterization

Potential use of red hibiscus flower extract for the production of spray-chilled microparticles: Characterization, stability, and bioaccessibility in vitro of anthocyanins

Microparticles (MLP) containing red hibiscus flower (Hibiscus rosa-sinensis) anthocyanins were produced by spray chilling, and characterized for physicochemical parameters, accelerated stability, and gastrointestinal release profile. Fully hydrogenated palm oil and cocoa butter were used as wall materials, at a lipid blend to hibiscus extract ratio of 70:30 (w/w). The lipid blends containing fully hydrogenated palm oil (FHPO) and cocoa butter (CB) were produced by ultrasound-assisted technique in the following FHPO to CB ratios: 100:0 (Control), 75:25, 50:50, 60:40, and 40:60. Increasing the cocoa butter content reduced the melting temperature and increased the unstable polymorphic behavior of the microparticles, resulting in amorphous characteristics. The microparticles exhibited higher viscosity, more agglomerates, and holes on the surface, and greater diameters. Characteristic peaks corresponding to the hibiscus extract were observed in the infrared spectra of the spray-chilled microparticles, indicating that the microencapsulation did not affect the anthocyanins. The antioxidant capacity of the red hibiscus anthocyanins ranged from 75 % to 79 %, with the best result observed for the treatment MLP_75:25. Higher antioxidant activities were observed for the lipid blends containing lower cocoa butter concentrations. Concerning the release profile of anthocyanins, the simulated GI digestion in vitro showed reduced release in the gastric tract and more intense release in the intestinal tract for an effective absorption of the antioxidant compounds in the small intestine. Furthermore, the treatment MLP_75:25 showed the highest encapsulation retention and lower total color difference in the accelerated stability study. Overall, the microparticles from all treatments were light-sensitive and thermosensitive at 35 °C. Thus, it is recommended to store the particles in a dark environment at temperatures below 35 °C for an effective use of the microparticles as natural food colorants.

Advances in Designing Essential Oil Nanoformulations: An Integrative Approach to Mathematical Modeling with Potential Application in Food Preservation

Preservation of foods, along with health and safety issues, is a growing concern in the current generation. Essential oils have emerged as a natural means for the long-term protection of foods along with the maintenance of their qualities. Direct applications of essential oils have posed various constraints to the food system and also have limitations in application; hence, encapsulation of essential oils into biopolymers has been recognized as a cutting-edge technology to overcome these challenges. This article presents and evaluates the strategies for the development of encapsulated essential oils on the basis of fascination with the modeling and shuffling of various biopolymers, surfactants, and co-surfactants, along with the utilization of different fabrication processes. Artificial intelligence and machine learning have enabled the preparation of different nanoemulsion formulations, synthesis strategies, stability, and release kinetics of essential oils or their bioactive components from nanoemulsions with improved efficacy in food systems. Different mathematical models for the stability and delivery kinetics of essential oils in food systems have also been discussed. The article also explains the advanced application of modeling-based encapsulation strategies on the preservation of a variety of food commodities with their intended implication in food and agricultural industries.

Application of spray drying, spray chilling and the combination of both methods to produce tucumã oil microparticles: characterization, stability, and β-carotene bioaccessibility

The aim of this work was to produce tucumã oil (PO) microparticles using different encapsulation methods, and to evaluate their properties, storage stability and bioaccessibility of the encapsulated β-carotene. Gum Arabic was used as carrier for spray drying (SD), while vegetable fat was the wall material for spray chilling (SC) and the combination of the methods (SDC). Powders were yellow (hue angle around 80°) and presented particles with small mean diameters (1.57-2.30 µm). PO and the microparticles possess high β-carotene contents (∼0.35-22 mg/g). However, some carotenoid loss was observed in the particles after encapsulation by SD and SDC (around 20%). After 90 days of storage, SDC particles presented the lowest degradation of total carotenoids (∼5%), while SD samples showed the highest loss (∼21%). Yet, the latter had the lowest contents of conjugated dienes (4.1-5.3 µmol/g) among treatments. At the end of simulated digestion, PO and the microparticles provided low β-carotene bioaccessibility (<10%), and only SC increased this parameter compared to the pure oil. In conclusion, carotenoid-rich microparticles with attractive color were obtained through microencapsulation of PO by SD, SC and SDC, revealing their potential as natural additives for the development of food products with improved nutritional properties. The SC method stood out for providing microparticles with high carotenoid content and retention, high oxidative stability, and improved β-carotene bioaccessibility.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of β' and β forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

Comparative Study of Cinnamon and Paprika Oleoresins Encapsulated by Spray Chilling and Particles from Gas Saturated Solutions Techniques: Evaluation of Physical Characteristics and Oleoresins Release in Food Simulated Media

In this study, cinnamon and paprika oleoresins were encapsulated by two technologies, respectively, spray chilling and particles from gas saturated solutions. Both technologies used palm oil as wall materials. The physical characteristics of the microparticles were compared as well as the oleoresins release behavior in high- and low-fat simulated food media. The spray chilling microparticles had an average diameter of 143.7 ± 1.5 µm, spherical shape, smooth surface, and passable flow property. In contrast, microparticles obtained by particles from gas saturated solutions (PGSS) showed an average diameter of 105.7 ± 0.6 µm, irregular shape, porous surface, poor flow property but higher encapsulation efficiency. In evaluating the compounds released in a simulated food medium, the spray chilling particles delivered 30.7%, while PGSS reached 23.1% after 1 h. Both microparticles well fitted the Kosmeyer-Peppas (R2 = 0.98 and 0.96 for spray chilling and PGSS) and Peppas-Sahlin models (R2 = 0.98 and 0.97 for spray chilling and PGSS). However, spray chilling microparticles showed a diffusion mechanism, while for PGSS ones erosion was the main mechanism. Despite the different physical characteristics, both microparticles proved to be possible facilitators in delivering oleoresins in food products.

Review of Cocos nucifera L. testa-derived phytonutrients with special reference to phenolics and its potential for encapsulation

Coconut (Cocos nucifera L.) and its value-added products are rich in medium chain triglycerides, polyphenols and flavonoids with a significant anti-oxidant potential. However, coconut and its products are underutilized for the development of nutraceuticals. Coconut testa is a brown cover of the endosperm, which is characterized with the considerable amount of phytonutrients, especially phenolics and flavonoids. The nutrient rich coconut testa is generally diverted for the production of animal feed or abandoned. Around 10-15% of the coconut kernel is removed as testa while preparing coconut desiccated powder. The coconut testa from the virgin coconut oil (VCO) industry also remains underutilized. Nevertheless, biochemical characterization of coconut testa has revealed its enormous anti-oxidant and nutraceutical potential. On the other hand there are reports describing the suitable encapsulation techniques to develop nutraceuticals from the plant-derived bioactives. In this context this review explores the prospect of utilizing the coconut testa-derived phytonutrients in developing a nutraceutical product.

Effect of drug load and lipid-wax blends on drug release and stability from spray-congealed microparticles

This study was designed to evaluate paraffin wax as a potential controlled release matrix for spray congealing and its impact on drug release and stability of the microparticles. Paraffin wax can form a hydrophobic barrier to moisture and reduce drug degradation besides retarding drug release in the gastrointestinal tract. More hydrophilic lipid-based additives can be incorporated to modulate the drug release through the paraffin wax barrier. This study reports the findings of lipid-wax formulations at preserving the stability of moisture-sensitive drugs in spray-congealed microparticles. Aspirin-loaded microparticles formulated with different drug loads, lipid additives, and lipid:wax ratios were produced by spray congealing. Stearic acid (SA), cetyl alcohol (CA), and cetyl ester (CE) were the lipid additives studied. The microparticles were evaluated for yield, encapsulation efficiency, particle size, drug stability, and release. CE exhibited the greatest effect on increasing drug release, followed by CA and SA. Dissolution profiles showed the best fit to Weibull kinetic model. The degree of drug degradation was low, with CA imparting the least protective effect, followed by SA and CE. Paraffin wax is useful for preserving the stability of moisture-sensitive aspirin and retarding its release from spray-congealed microparticles. The addition of lipid additives modulated drug release without compromising drug stability.

Formulation of Chitosan Microparticles for Enhanced Intranasal Macromolecular Compound Delivery: Factors That Influence Particle Size during Ionic Gelation

Therapeutic macromolecules (e.g., protein and peptide drugs) present bioavailability challenges via extravascular administration. The nasal route presents an alternative non-invasive route for these drugs, although low bioavailability remains challenging. Co-administration of permeation enhancers is a promising formulation approach to improve the delivery of poorly bioavailable drugs. The aim of this study was to prepare and characterize chitosan microparticulate formulations containing a macromolecular model compound (fluorescein isothiocyanate dextran 4400, FD-4) and a bioenhancer (piperine). Ionic gelation was used to produce chitosan microparticle delivery systems with two distinct microparticle sizes, differing one order of magnitude in size (±20 µm and ±200 µm). These two microparticle delivery systems were formulated into thermosensitive gels and their drug delivery performance was evaluated across ovine nasal epithelial tissues. Dissolution studies revealed a biphasic release pattern. Rheometry results demonstrated a sol-to-gel transition of the thermosensitive gel formulation at a temperature of 34 °C. The microparticles incorporating piperine showed a 1.2-fold increase in FD-4 delivery across the excised ovine nasal epithelial tissues as compared to microparticles without piperine. This study therefore contributed to advancements in ionic gelation methods for the formulation of particulate systems to enhance macromolecular nasal drug delivery.

Encapsulation of Rich-Carotenoids Extract from Guaraná (Paullinia cupana) Byproduct by a Combination of Spray Drying and Spray Chilling

Guaraná byproducts are rich in carotenoids, featuring strong antioxidant capacity and health-promoting benefits. However, these compounds are highly susceptible to oxidation and isomerization, which limits their applications in foods. This research aimed to encapsulate the carotenoid-rich extract from reddish guaraná peels by spray drying (SD), chilling (SC), and their combination (SDC) using gum arabic and vegetable fat as carriers. The carotenoid-rich extract was analyzed as a control, and the formulations were prepared with the following core–carrier ratios: SD20 (20:80), SD25 (25:75), SD33 (33:67), SC20 (20:80), SC30 (30:70), SC40 (40:60), SDC10 (10:90), and SDC20 (20:80). The physicochemical properties of the formed microparticles were characterized, and their storage stability was evaluated over 90 days. Water activity of microparticles formed during the SD process increased during storage, whereas those formed by SC and SDC processes showed no changes in water activity. The formed microparticles exhibited color variation and size increase over time. Carotenoid degradation of the microparticles was described by zero-order kinetics for most treatments. Considering the higher carotenoid content and its stability, the optimum formulation for each process was selected to further analysis. Scanning electron micrographs revealed the spherical shape and absence of cracks on the microparticle surface, as well as size heterogeneity. SD increased the stability to oxidation of the carotenoid-rich extract by at least 52-fold, SC by threefold, and SDC by 545-fold. Analysis of the thermophysical properties suggested that the carrier and the process of encapsulation influence the powder’s thermal resistance. Water sorption data of the SDC microparticles depended on the blend of the carrier agents used in the process. Carotenoid encapsulation via an innovative combination of spray drying and spray chilling processes offers technological benefits, which could be applied as a promising alternative to protect valuable bioactive compounds.

Targeted delivery and controlled released of essential oils using nanoencapsulation: A review

Essential oils (EOs) contain a complex mixture of volatile and non-volatile molecules with diverse biological activities, including flavoring, antioxidant, antimicrobial, and nutraceutical properties. As a result, EOs have numerous potential applications in the agriculture, food, and pharmaceutical industries. However, their hydrophobicity, chemical instability, and volatility pose a challenge for many of their applications. These challenges can often be overcome by encapsulation EOs in colloidal delivery systems. Over the last decade or so, nanoencapsulation and microencapsulation technologies have been widely explored for their potential to improve the handling, dispersibility, and stability of hydrophobic substances, as well as to control their release profiles (e.g., targeted, triggered, sustained, or burst release). These technologies include emulsification, coacervation, precipitation, spray-drying, spray-cooling, freeze-drying, fluidized bed coating, and extrusion. This article reviews some of the most important developments in EOs encapsulation, the physicochemical mechanisms underlying the behavior of encapsulated EOs, current challenges, and potential applications in the food and biomedical sciences. This review has found that nanoencapsulation has countless of potential advantages for the utilization of EOs in the food industry and can improve their water-dispersibility, food matrix compatibility, chemical stability, volatility, and bioactivity.

Microencapsulation by spray chilling in the food industry: Opportunities, challenges, and innovations

Background

The increasing demand for healthy eating habits and the emergence of the COVID-19 pandemic, which resulted in a health crisis and global economic slowdown, has led to the consumption of functional and practical foods. Bioactive ingredients can be an alternative for healthy food choices; however, most functional compounds are sensitive to the adverse conditions of processing and digestive tract, impairing its use in food matrices, and industrial-scale applications. Microencapsulation by spray chilling can be a viable alternative to reduce these barriers in food processing.

Scope and approach

This review discusses the use of spray chilling technique for microencapsulation of bioactive food ingredients. Although this technology is known in the pharmaceutical industry, it has been little exploited in the food sector. General aspects of spray chilling, the process parameters, advantages, and disadvantages are addressed. The feasibility and stability of encapsulated bioactive ingredients in food matrices and the bioavailability in vitro of solid lipid microparticles produced by spray chilling are also discussed.

Main findings and conclusions

Research on the microencapsulation of bioactive ingredients by spray chilling for use in foods has shown the effectiveness of this technique to encapsulate bioactive compounds for application in food matrices. Solid microparticles produced by spray chilling can improve the stability and bioavailability of bioactive ingredients. However, further studies are required, including the use of lipid-based encapsulating agents, process parameters, and novel formulations for application in food, beverages, and packaging, as well as in vivo studies to prove the effectiveness of the formulations.

Applications of capsaicin in food industry: functionality, utilization and stabilization

As a bioactive component in Capsicum species, capsaicin is a compound of hot chili peppers which is known as the main substance responsible for the spiciness of these fruits. Besides its taste and physiological effects, it exhibits good antioxidant activity in food matrix and antimicrobial activity against foodborne pathogens and viruses. Considering its low stability and bioaccessibility, and also regarding its irritation, the entrapment methods of capsaicin are fully developed. To compensate the limitations of capsaicin, various encapsulation methods have been used so far, including coacervation, emulsion, spray chilling, and liposomal delivery. Capsaicin has been widely used as a flavoring and preservative agent in food formulations and even as an active compound in packaging film and functional foods. This review provides an overview of the techno-functional properties, stabilization procedures, and burgeoning usages of capsaicin in the latest studies of the food sector. So, it may introduce new windows for the application of this compound.

Recent Developments in Solid Lipid Microparticles for Food Ingredients Delivery

Health food has become a prominent force in the market place, influencing many food industries to focus on numerous bioactive compounds to reap benefits from its properties. Use of these compounds in food matrices has several limitations. Most of the food bio-additives are sensitive compounds that may quickly decompose in both food and within the gastrointestinal tract. Since most of these bioactives are highly or partially lipophilic molecules, they possess very low water solubility and insufficient dispersibility, leading to poor bioavailability. Thus, various methods of microencapsulation of large number of food bioactives have been studied. For encapsulation of hydrophobic compounds several lipid carriers and lipid platforms have been studied, including emulsions, microemulsions, micelles, liposomes, and lipid nano- and microparticles. Solid lipid particles (SLP) are a promising delivery system, can both deliver bioactive compounds, reduce their degradation, and permit slow and sustained release. Solid lipid particles have important advantages compared to other polymer carriers in light of their simple production technology, including scale up ability, higher loading capacity, extremely high biocompatibility, and usually low cost. This delivery system provides improved stability, solubility in various matrixes, bioavailability, and targeting properties. This article reviews recent studies on microencapsulation of selected bioactive food ingredients in solid lipid-based carriers from a point of view of production methods, characteristics of obtained particles, loading capability, stability, and release profile.

In vitro bioactivity approach of unripe genipap (Genipa americana L., Rubiaceae) fruit extract and its solid lipid microparticle

Growing awareness in favor of innovative and healthier alternatives is creating a noticeable shift from synthetic colorants to natural additives. And, such a swing in the consumer market is growing slowly but noticeably. In this context, genipap (Genipa americana L.) fruit represents an emerging source of blue colorants in Latin America with extensive application possibilities. This is despite the fact that there are few studies concerning its toxicity predictive factors. In this early-stage study we propose to investigate safety issues around genipap extract (IBBP); we also attempt to identify fingerprint profiling of both IBBP extract and solid lipid microparticles containing IBBP extract (SLM-IBBP) using in vitro assays. The main compounds identified were genipin, and genipin 1-β-gentiobioside. Results indicated that IBBP extract, at 25 µg/mL, was able to promote DNA damage in CHO-K1 cells, suggesting a genotoxic effect. On the other hand, the SLM-IBBP inhibited almost all cancer cell lines with GI₅₀ ranging from 0.25 μg/mL to 43.5 μg/mL. Also, IBBP-SLM seems to exert a desirable apoptosis induction (at 25 µg/mL dosage). The next steps for our work, therefore, will focus on other nanoparticle formulation approaches, in particular with the use of natural Brazilian starch. An evaluation of the metabolism and distribution of microparticles, and their safety for food and pharmaceutical purposes, are also required.

Microencapsulation of green tea polyphenols by ionic gelation and spray chilling methods

The consumption of teas has been increasing with the dissemination of information regarding the health benefits of its constituents. Obtaining food products with healthier profiles is already a reality for industry with the increasing development of new functional ingredients, including the use of tea and its derivatives (extracts). This work aimed to evaluate the encapsulation of green tea extract powder in lipid microparticles (LMP) by the spray chilling method and in ionic gelation microparticles (IGMP) by the ionic gelation method to obtain polyphenol-rich water insoluble components. Microparticles were adequately obtained in both methods, with typical physical characteristics consistent with the results in literature results, 83.5 ± 2.8% encapsulation efficiency for LMP and 72.6 ± 0.4% for IGMP, and antioxidant activity (IC50 μg/mL) of 33,169.4 ± 123.8 (IGMP) and 2099.7 ± 35.3 (LMP). The microparticles samples were considered suitable as ingredients for add polyphenols in foods.

Solid lipid microparticles loaded with cinnamon oleoresin: Characterization, stability and antimicrobial activity

Cinnamon bark oleoresin (CO) is a natural flavoring that has several biological properties and can act as an antimicrobial agent. However, oleoresins are susceptible to degradation by light, oxygen and temperature. Thus, the objective of this work was the production and characterization of microparticles loaded with CO obtained by the spray chilling technique. Hardfat (PH) and palm oil (PO) were used as carriers in different proportions: 100:0; 80:20; 60:40, respectively. The active concentration was 1 and 2%. Solid lipid microparticles (SLM) were stored at 25 and 45°C having their polymorphism, retention capacity of the volatile compounds and antimicrobial capacity assessed over 28 days. CO presented cinnamaldehyde (Cn), O-methoxy cinnamaldehyde (OmCn) and coumarin (Co) as the major volatile components. The minimum inhibitory concentration (MIC) of the CO against molds, yeasts and Gram-negative bacteria was of 0.1% (v/v), for every microorganism. In the SLM characterization there was a significant size variation, with a mean diameter (d 0.5) in the range of 8-72 μm. Most of the formulations showed crystals in the polymorphic form β '. The formulation containing only PH as the carrier agent and 2% CO was able to better retain the volatile compounds. During the storage period, formulations F2 and F3, containing proportions of HP and OP of 80:20 and 60:40, respectively, and 2% CO, showed the best stabilities in relation to the concentration of Cn. The antimicrobial activity of the SLM against Candida pseudointermedia and Penicillium paneum, evaluated by the diameter of inhibition zone, increased over the 28 days of storage.

The influence of the storage temperature on the stability of lipid microparticles containing ginger oleoresin

Ginger oleoresin (GO) can be encapsulated within a protective lipid matrix in order to facilitate handling, provide protection against the external environment or promote the stability of GO compounds. The aim of this study was to verify the ability of solid lipid microparticles (SLMs) containing GO (10-20% w/w) to maintain or improve the stability of ginger compounds, by monitoring SLMs' characteristics during storage at different temperatures (25 and 40 °C). The lipids matrix of SLMs were composed by stearic acid (90, 80, 75, 65% w/w) and oleic acid (15% w/w), The crystalline structure of the particles after 84 days of storage did not present any polymorphic alterations, while presenting spherical form upon scanning by electron microscopy. SLMs containing oleic acid showed degradation of 6-gingerol when stored at 40 °C. Major volatile compounds had better stability in particles containing oleic acid. Kinetics of volatiles release resulted in a diffusion mechanism. SLMs showed better stability of GO compounds during storage at 25 °C than un-encapsulated GO and could, therefore, improve its distribution in foods due to its conversion to powder.

Effect of Lipid Additives and Drug on the Rheological Properties of Molten Paraffin Wax, Degree of Surface Drug Coating, and Drug Release in Spray-Congealed Microparticles

Paraffin wax is potentially useful for producing spray-congealed drug-loaded microparticles with sustained-release and taste-masking properties. To date, there is little information about the effects of blending lipids with paraffin wax on the melt viscosity. In addition, drug particles may not be entirely coated by the paraffin wax matrix. In this study, drug-loaded paraffin wax microparticles were produced by spray-congealing, and the effects of lipid additives on the microparticle production were investigated. The influence of lipid additives (stearic acid, cetyl alcohol, or cetyl esters) and drug (paracetamol) on the rheological properties of paraffin wax were elucidated. Fourier transform-infrared spectroscopy was conducted to investigate the interactions between the blend constituents. Selected formulations were spray-congealed, and the microparticles produced were characterized for their size, drug content, degree of surface drug coating, and drug release. The viscosity of wax-lipid blends was found to be mostly lower than the weighted viscosity when interactions occurred between the blend constituents. Molten paraffin wax exhibited Newtonian flow, which was transformed to plastic flow by paracetamol and pseudoplastic flow by the lipid additive. The viscosity was decreased with lipid added. Compared to plain wax, wax-lipid blends produced smaller spray-congealed microparticles. Drug content remained high. Degree of surface drug coating and drug release were also higher. The lipid additives altered the rheological properties and hydrophobicity of the melt and are useful for modifying the microparticle properties.

Tailoring Drug Release Properties by Gradual Changes in the Particle Engineering of Polysaccharide Chitosan Based Powders

Chitosan is a natural copolymer generally available in pharmaceutical and food powders associated with drugs, vitamins, and nutraceuticals. This study focused on monitoring the effect of the morphology and structural features of the chitosan particles for controlling the release profile of the active pharmaceutical ingredient (API) propranolol hydrochloride. Chitosan with distinct molecular mass (low and medium) were used in the formulations as crystalline and irregular particles from commercial raw material, or as spherical, uniform, and amorphous spray-dried particles. The API⁻copolymer interactions were assessed when adding the drug before (drug-loaded particles) or after the spray drying (only mixed with blank particles). The formulations were further compared with physical mixtures of the API with chitin and microcrystalline cellulose. The scanning electron microscopy (SEM) images, surface area, particle size measurements, X-ray diffraction (XRD) analysis and drug loading have supported the drug release behavior. The statistical analysis of experimental data demonstrated that it was possible to control the drug release behavior (immediate or slow drug release) from chitosan powders using different types of particles.