Rheological properties of gallic acid-grafted-chitosans with different substitution degrees

Chitosan-gallic acid conjugate edible coating film for perishable fruits

Approximately 30 % of global agricultural land is used to produce food that is ultimately lost or wasted, making it imperative to explore strategies for mitigating this waste. This study explored the potential of chitosan (CS) derivatives as edible coatings to extend food shelf life. Although soluble CS derivatives such as glycol CS are suitable coatings, their antimicrobial properties often diminish with increased solubility. To address this issue, gallic acid (GA), a polyphenol, was conjugated with CS using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry to create edible coating solutions. The resulting CS-GA films exhibited remarkable solubility, mechanical strength, UV-blocking properties, and superior antioxidant and antimicrobial properties. Furthermore, these films exhibited a high affinity for hydrophobic fruit surfaces while also facilitating easy washing, making them an alternative for consumers who are averse to film-coated products. The CS-GA-coated fruits exhibited minimal surface spoilage, decreased mass loss, and increased firmness. Therefore, these CS-GA conjugate coatings hold significant potential as eco-friendly, edible, and washable food packaging coatings.

Acetylated rice starch nanocrystals improved the physical, mechanical, and structural properties of native rice starch based films

Rice starch nanocrystals (SNC) and acetylated rice starch nanocrystals (ASNC) with three different substitution degrees (DS) for 0.22 (ASNCa), 0.56 (ASNCb), and 0.83 (ASNCc), respectively, were synthesized. Starch nanocrystals (SNC, ASNCa, ASNCb and ASNCc) with varying concentrations (0-25 %) were used in the production of composite rice starch-based films plasticized with glycerol using the solvent casting technique. Films were compared concerning their morphology, moisture content and solubility, transmittance, tensile strength, elongation at break. The SNC and ASNC content and acetylated DS had a significant effect (p ≤ 0.05) on all the properties investigated when compared to the control film. The addition of ASNC resulted in less hydrophilic films and UV light barrier properties, and the addition of SNC and ASNC increased the rigidity of starch film. There was an increase of 156.7 % in tensile strength for 10 % ASNCc composite films and a reduction of 68.1 % in water vapor permeability for 20 % ASNCc composite films. The rice starch/ASNCb nanocomposite films with the addition of 5 % and 10 % ASNCb exhibited a compact, smooth, and flat surface structure. Therefore, these results showed that ASNC significantly improved the mechanical properties, surface morphology and thermal stability of the films.

Effects of Phenolics on the Physicochemical and Structural Properties of Collagen Hydrogel

In the current era, the treatment of collagen hydrogels with natural phenolics for the improvement in physicochemical properties has been the subject of considerable attention. The present research aimed to fabricate collagen hydrogels cross-linked with gallic acid (GA) and ellagic acid (EA) at different concentrations depending on the collagen dry weight. The structural, enzymatic, thermal, morphological, and physical properties of the native collagen hydrogels were compared with those of the GA/EA cross-linked hydrogels. XRD and FTIR spectroscopic analyses confirmed the structural stability and reliability of the collagen after treatment with either GA or EA. The cross-linking also significantly contributed to the improvement in the storage modulus, of 435 Pa for 100% GA cross-linked hydrogels. The thermal stability was improved, as the highest residual weight of 43.8% was obtained for the hydrogels cross-linked with 50% GA in comparison with all the other hydrogels. The hydrogels immersed in 30%, 50%, and 100% concentrations of GA also showed improved swelling behavior and porosity, and the highest resistance to type 1 collagenase (76.56%), was obtained for 50% GA cross-linked collagen hydrogels. Moreover, GA 100% and EA 100% obtained the highest denaturation temperatures (Td) of 74.96 °C and 75.78 °C, respectively. In addition, SEM analysis was also carried out to check the surface morphology of the pristine collagen hydrogels and the cross-linked collagen hydrogels. The result showed that the hydrogels cross-linked with GA/EA were denser and more compact. However, the improved physicochemical properties were probably due to the formation of hydrogen bonds between the phenolic hydroxyl groups of GA and EA and the nitrogen atoms of the collagen backbone. The presence of inter- and intramolecular cross-links between collagen and GA or EA components and an increased density of intermolecular bonds suggest potential hydrogen bonding or hydrophobic interactions. Overall, the present study paves the way for further investigations in the field by providing valuable insights into the GA/EA interaction with collagen molecules.

pH-responsive in situ gelling properties of thiolated citrus high-methoxyl pectin and its potential gel mechanism

pH-responsive in situ gelling properties of thiolated citrus high-methoxyl pectin (TCHMP) were investigated in this study. The gelation capacity results revealed that the in situ gelation behavior of TCHMP only occurred when the pH value was higher than 6.25. The gel strength increased from 26.63 g to 42.77 g as the pH value increased from 7.4 to 8.9. Rheological measurements confirmed that the apparent viscosity and viscoelasticity of TCHMP were highly dependent on pH value and dialysis time. Compared with the control group, the apparent viscosity of TCHMP dialyzed in phosphate-buffered saline (PBS) of pH 8.9 for 180 min increased 695-fold. During the dialysis process of TCHMP at different pH values (7.4-8.9), the final thiol groups content decreased and the final disulfide bonds content increased with the increase in pH value. This illustrates that the mechanism of in situ gelation is mainly the oxidation of thiol-thiol groups to form disulfide bonds. These results can put forward new insights into the pH-responsive in situ gelling properties of TCHMP and provide a theoretical basis for the application of TCHMP in neutral and alkaline gel systems.

Recent advances on formation mechanism and functionality of chitosan-based conjugates and their application in o/w emulsion systems: A review

Chitosan is very attractive in the food industry due to its good biocompatibility and high biodegradability. In particular, it can be used as a preferred material for the fabrication of stabilizers in emulsion-based foods. However, poor solubility and antioxidant activity limit its wide application. The functionality of chitosan can be extended by forming chitosan-based conjugates, which can be used to modulate the characteristics of the oil-water interface, thereby improving the stability and performance of the o/w emulsions. This review highlights the recent progress of chitosan-based conjugates, focusing on the classification, formation mechanism and functional properties, and the applications of these conjugates in o/w emulsions are summarized. Lastly, the promising research trends and challenges of chitosan-based conjugates and their emulsion systems in this field are also discussed. This review will provide a theoretical basis for the wide application of chitosan-based conjugates in emulsion systems.

Polyphenol-Polysaccharide Complex: Preparation, Characterization and Potential Utilization in Food and Health

Polysaccharides and polyphenols coexist in many plant-based food products. Polyphenol-polysaccharide interactions may affect the physicochemical, functional, and physiological properties, such as digestibility, bioavailability, and stability, of plant-based foods. In this review, the interactions (physically or covalently linked) between the selected polysaccharides and polyphenols are summarized. The preparation and structural characterization of the polyphenol-polysaccharide conjugates, their structural-interaction relationships, and the effects of the interactions on functional and physiological properties of the polyphenol and polysaccharide molecules are reviewed. Moreover, potential applications of polyphenol-polysaccharide conjugates are discussed. This review aids in a comprehensive understanding of the synthetic strategy, beneficial bioactivity, and potential application of polyphenol-polysaccharide complexes. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Bombesin Peptide Conjugated Water-Soluble Chitosan Gallate-A New Nanopharmaceutical Architecture for the Rapid One-Pot Synthesis of Prostate Tumor Targeted Gold Nanoparticles

PURPOSE

We report herein bombesin peptide conjugated water-soluble chitosan gallate as a template for rapid one-pot synthesis of gold nanoparticles (AuNPs) with capabilities to target receptors on prostate cancer cells.

METHODS

Water-soluble chitosan (WCS), anchored with gallic acid (GA) and LyslLys3 (1,4,7,10-tetraazacyclo dodecane-1,4,7,10-tetraacetic acid) bombesin 1-14 (DBBN) peptide, provides a tumor targeting nanomedicine agent. WCS nanoplatforms provide attractive strategies with built-in capabilities to reduce gold (III) to gold nanoparticles with stabilizing and tumor-targeting capabilities. WCS-GA-DBBN encapsulation around gold nanoparticles affords optimum in vitro stability.

RESULTS

The DBBN content in the WCS-GA-DBBN sample was ~27%w/w. The antioxidant activities of WCS-GA and WCS-GA-DBBN nanocolloids were enhanced by 12 times as compared to the nascent WCS. AuNPs with a desirable hydrodynamic diameter range of 40-60 nm have been efficiently synthesized using WCS-GA and WCS-GA-DBBN platforms. The AuNPs were stable over 4 days after preparation and ~3 days after subjecting to all relevant biological fluids. The AuNPs capped with WCS-GA-DBBN peptide exhibited superior cellular internalization into prostate tumor (PC-3) cells with evidence of receptor mediated endocytosis.

CONCLUSION

The AuNPs capped with WCS-GA-DBBN exhibited selective affinity toward prostate cancer cells. AuNPs conjugated with WCS-GA-DBBN serve as a new generation of theranostic agents for treating various neoplastic diseases, thus opening-up new applications in oncology.

Optimization of Critical Parameters for Carbodiimide Mediated Production of Highly Modified Chitosan

An optimization of the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and hydroxy benzotriazole mediated conjugation of the polysaccharide chitosan with functional carboxylic acids was shown. Optimal parameters that enable resource-efficient synthesis of highly functionalized chitosan were identified. In particular, use of only catalytic instead of stoichiometric amounts of hydroxy benzotriazole and tight control of pH in reaction mixture resulted in highly efficient incorporation of the desired moieties as side chains in chitosan. As a result, the model reactant 4-azidobenzoic acid was incorporated resulting in a degree of substitution of over 30% with very high coupling efficacy of up to 90%. Similar results were obtained with other carboxylic acids such as methacrylic acid, 3-(2-furyl) propionic acid and 3-maleimido propionic acid, highlighting the broad applicability of our findings for the functionalization of chitosan.

Conjugation of ferulic acid onto pectin affected the physicochemical, functional and antioxidant properties

BACKGROUND

Pectin, as a functional ingredient, is best known as a gelling and thickening agent, stabilizer, and fat substitute in processed foods. The synthesis of pectin graft copolymers is considered one of the most fascinating ways to improve its physicochemical and functional properties. In this study, therefore, water-soluble pectin or ultrasound-treated pectins (UP30 and UP60) grafted with ferulic acid (FA) conjugates, pectin-g-FA, UP30-g-FA and UP60-g-FA, were synthesized via a free radical-mediated grafting procedure, and their physicochemical, structural, and functional characteristics were investigated. Moreover, 2,2-diphenyl-1-picryl-hydrazyl (DPPH)-radical scavenging activity, Trolox equivalent antioxidant capacity (TEAC) assay and ferric-reducing ability of plasma (FRAP) assay were used to evaluate their antioxidant activities in vitro.

RESULTS

Results showed that FA was covalently grafted onto pectin or ultrasound-treated pectins, and the grafting ratios of pectin-g-FA, UP30-g-FA and UP60-g-FA were 65.43 ± 1.30, 82.55 ± 1.71 and 75.82 ± 0.89 mg FA/g, respectively. Although the molecular weights, apparent viscosities, and thermal stabilities of the three FA-grafted pectin conjugates decreased and their surface morphologies were different from those of native pectin and ultrasound-treated pectins, they possessed prominent DPPH-radical scavenging ability [half maximal inhibitory concentration (IC₅₀ ) of 0.32 to 0.89 mg mL^-1 ) and antioxidant capacity (TEAC of 100.02 to 153.42 μmol Trolox/g sample; FRAP: 166.41 to 270.27 μmol FeSO₄ /g sample). Their antioxidant potentials were positively correlated with the grafting ratio.

CONCLUSION

This study provided a promising strategy for the functionalization of pectin, and the prepared FA-grafted pectin conjugates could be explored as functional ingredients that showed potential for applications in food and agriculture systems. © 2020 Society of Chemical Industry.

The thiolated chitosan: Synthesis, gelling and antibacterial capability

Chitosan-1-(mercaptomethyl)-cyclopropane acetic acid (CS-MCA) copolymer was synthesized by amino linkage. The obtained copolymer was characterized by FTIR, ¹H NMR, XRD, TGA and SEM. Porous and reticulate morphologies were found on the CS-MCA surface. The effects of pH on the rheological properties of CS-MCA were investigated. On the one hand, the apparent viscosity of CS-MCA indicated a shear-thinning behavior. The graft of MCA enhanced the moduli and the maximum elastic properties were observed at pH = 7.00. The addition of dithiothreitol reduced the viscosity and modulus of CS-MCA hydrogel, and the gelation time, temperature and frequency were obtained in dynamic oscillatory tests. The antibacterial effect of CS-MCA against E. coli was investigated for the inhibition zone and bacterial growth curve. These results showed that CS-MCA had better antibacterial ability than chitosan without modification. Therefore, the rheological behavior and functional activities can be applied for the hydrocolloid gels in food and pharmaceutical applications.