Comparison of properties of raw pulse flours with those of jet-cooked, drum-dried flours

Effect of cooking conditions on chickpea flour functionality and its protein physicochemical properties

Chickpea is an important food legume that usually undergoes various processing treatments to enhance nutritional value and functional properties. This study aimed to investigate the effects of different cooking conditions on physicochemical, structural, and functional properties of chickpea, especially its protein macromolecules. Kabuli chickpea seeds were processed by water cooking at different temperatures (63, 79, 88, and 96°C), followed by evaluating flour solubility, water-holding capacity (WHC), pasting property, as well as the total protein profile and fractionated protein distributions. Cooking treatments significantly decreased flour solubility (from 39.45 to 25.21 g/100 g flour) and pasting viscosity (peak and final viscosities, from 1081 to 300.5 cP and 1323 to 532 cP, respectively), while increasing WHC (from 0.862 to 1.144 g H2O/g flour) of chickpea flour (p < 0.05). These behaviors were enhanced by increasing cooking temperature. Meanwhile, cooking induced a significant change of chickpea proteins, modifying the albumin- and globulin-like fractions of chickpea protein to display glutelin-like behavior. The current study provides potential approaches for manipulating chickpea flour functionalities (e.g., solubility, viscosity, and WHC) to address the process and product challenges and favor product innovation.

Pretreatments and Particle Size on the Glycemic Index and Rheological and Functional Food Properties of Bean Flours

The beans' protein and slow-digesting carbohydrate content make it an appealing choice for healthy food development. However, its properties are influenced by the flour extraction processes. This study is aimed at evaluating the effect of particle size and three pretreatments-drying (D), soaking + cooking + dehydrating 3 h (SCD3), and soaking + cooking + dehydrating 24 h (SCD24)-on the estimated glycemic index (eGI) compared with raw bean flour (R). The methodology covered water absorption (WAI), water solubility (WSI), amylose content, starch digestibility, eGI, phenolic quantification, and rheology. The results showed that WAI correlated negatively with WSI and amylose, varying among pretreatments and sizes. WAI increased as D < SCD24 < SCD3 < R. Glucose release (HI) differed between fine (125 μm) and coarse fractions (242 μm), with SCD24 and R showing the lowest eGI (22.8-24.2). SCD3 had the highest flavonoid concentration, while R and D had more quercetin-3-glucoside. SCD24 displayed higher elastic/viscous moduli than R. Bean flours from all treatments had low GI and contained bioactive polyphenols (catechin, epicatechin, ferulic acid, quercetin). The optimal treatment was SCD24, particularly in the coarse fraction, showing potential for functional food development and novel applications such as precision nutrition.

Effect of subcritical water flash release processing on buckwheat flour properties

BACKGROUND

Buckwheat (Fagopyrum esculentum) is rich in bioactive components. However, many of these components are trapped within cellular structures, making them inaccessible. Buckwheat flour was hydrothermally modified using subcritical water coupled with a flash pressure release (SCWF). The effects of the SCWF parameters (120, 140, and 160 °C and hold times of 0, 15, and 30 min) on the flour's structure, physicochemical, and functional properties were studied relative to the raw flour.

RESULTS

Treatment deepened the flour color with increasing processing temperatures and hold times. Starch content remained unchanged though its granular structure was disrupted. SCWF treatments lowered total phenolic content compared with the raw flour, except for 160 °C-30 min, where total phenolic content increased by 12.7%. The corresponding antioxidant activities were found consistent with phenolic content. Soluble and insoluble dietary fiber amounts were not substantially influenced at 120 and 140 °C, whereas treatments at 160 °C (15 and 30 min hold) decreased soluble dietary fiber while increasing insoluble dietary fiber. Protein content increased 70-109% in some treatments, suggesting greater protein accessibility. Water-holding capacity significantly increased for flour treated at 120 °C, whereas only slight improvements occurred at 140 and 160 °C.

CONCLUSIONS

Subcritical water flash processing can modify the compositional and functional properties of buckwheat flour depending on the choice of reaction conditions. Observed changes were consistent with alteration of the flour's cellular structure and allow some components to become more accessible. The resulting SCWF-modified buckwheat flours provide new food ingredients for potential use in ready-to-eat foods and spreads with improved health benefits. Published 2022. This article is a U.S. Government work and is in the public domain in the USA.

Pulse processing affects gas production by gut bacteria during in vitro fecal fermentation

Flatulence is one barrier to pulse consumption for many people. Therefore, we examined how processing affects gas production by the microbiome in three classes of pulses. Processing did not affect gas production from Navy beans. However, in Pardina lentils and green peas, (-1.9 ± 0.3 mL/24 h, p < 0.001; -2.3 ± 0.3 mL/24 h, p < 0.001, respectively). In Pardina lentils and green peas, germination diminished carbohydrate utilization by the microbiome compared with unprocessed samples. In Pardina lentils germination reduced abundance germination resulted in the greatest reduction in gas production among six processing methods of amplicon sequence variants (ASVs) from Bacteroides and Lachnospiraceae and reduced propionate production compared with unprocessed samples. In green peas, germination reduced ASVs from Lachnospiraceae, including one from Roseburia, and reduced proportion of butyrate production during fermentation. Three ASVs from Clostridium sensu stricto (cluster 1), Megasphaera elsdenii, and unclassified Veillonellaceae, were strongly associated with increased gas production across all samples (ρ = 0.67-0.69, p < 0.001). This study showed that processing can reduce gas production by the microbiome in some pulses, but also reduces saccharolytic fermentation and production of beneficial microbial metabolites.

Chemical profile of colorful bean (Phaseolus vulgaris L) flours: Changes influenced by the cooking method

This study aimed to determine how the cooking methods change the phenolics and saponins profiles, oligosaccharides, antinutrients and antioxidant properties of flours from colorful beans. The autoclave cooking consisted of: 6 h soaking and 5 min cooking (C5); and 20 min cooking without soaking (C20). Both cooking methods significantly promote changes on the chemical compounds studied, and the intensity of these variations were affected by the cultivars. Most of flours of C5 beans presented a lower loss of anthocyanins (3.9-70.0%), DPPH (11.7-87.2%), ABTS (0.0-82.7%), and tannins (0.0-90.0%) compared with C20. The cooked flours of Artico and Realce showed some similarities among chemical compounds, as well as the lowest concentration of tannins (0.0 mg‧g^-1), antioxidant activity (0.40 µmol Trolox‧g^-1), and higher amounts of oligosaccharides and acetylcholine. Most of cooked flours presented a reduction in phenolics and soyasaponins αg and βg, and an increase in soyasaponins Ba and I and oligosaccharides (mainly C20 flours).

Influence of partial pork meat replacement by pulse flour on physicochemical and sensory characteristics of low-fat burgers

BACKGROUND

Numerous non-meat ingredients, such as hydrocolloids, starches, and fibers, have been studied to improve texture characteristics and increase the ability to bind water in low-fat meat products. In this sense, pulses flours (lentil, chickpea, pea, and bean) were studied at two levels and various water:flour ratios to replace 10-44% pork meat in low-fat burgers and determine the effect on their sensory and technological properties (cooking yield, expressible liquid, diameter reduction, and color and texture profile).

RESULTS

All pork-meat burgers that included pulse flour showed higher cooking yields, lower diameter reductions, and expressible liquids than all-meat burgers, which displayed better oil and water retention. Higher water additions resulted in burgers with less hardness. Burgers with 80 g kg^-1 lentil flour in all water/flour ratios presented the lowest total color difference (ΔE) compared with the commercial control. Burgers with the higher level of all pulse flour tested and medium water levels showed acceptable sensory scores.

CONCLUSIONS

Partial pork meat replacement by different legume flour (lentil, chickpea, pea, and bean), at levels of 80 and 150 g kg^-1 and water/flour ratios of 1250, 1600, and 2000 g kg^-1 resulted in low-fat burgers with adequate physicochemical characteristics. Moreover, the sensorial evaluation of the formulations with the maximum flour addition and intermediate water/flour ratio showed that they had good sensorial acceptability with no effect of flour type. © 2020 Society of Chemical Industry.

The compositional, physicochemical and functional properties of germinated mung bean flour and its addition on quality of wheat flour noodle

Despite sprouted grains have high nutritional and functional properties, their exploration in mung bean and application in traditional foods are limited. The effects of germination of mung bean for 12, 24, 36, 48, 60 and 72 h on compositional, physicochemical and functional properties of its flour were investigated. The effects of incorporation of germinated mung bean flour at different levels (0, 10, 20 and 30%) on noodles making properties of wheat flour were evaluated 0. The protein content increased while the amylose increased initially and then decreased with increase in germination time. Water absorption index, oil binding capacity and water retention capacity increased, while water soluble index initially increased and then decreased. The germinated mung bean flour became darker with increase in germination time. The protein bound to starch in noodlesed to increase in hardness, cohesiveness, gumminess, chewiness, resilience and cooking time of noodles. Additionally, the water absorption, cooking loss, adhesiveness and springiness of raw noodles and springiness, cohesiveness and chewiness of cooked noodles decreased with the addition of germinated flour.