Effect of high hydrostatic pressure on Salmonella spp inactivation and meat-quality of frozen chicken breast

Principles and Applications of Non-Thermal Technologies for Meat Decontamination

Meat contains high-value protein compounds that might degrade as a result of oxidation and microbial contamination. Additionally, various pathogenic and spoilage microorganisms can grow in meat. Moreover, contamination with pathogenic microorganisms above the infectious dose has caused foodborne illness outbreaks. To decrease the microbial population, traditional meat preservation methods such as thermal treatment and chemical disinfectants are used, but it may have limitations for the maintenance of meat quality or the consumers acceptance. Thus, non-thermal technologies (e.g., high-pressure processing, pulsed electric field, non-thermal plasma, pulsed light, supercritical carbon dioxide technology, ozone, irradiation, ultraviolet light, and ultrasound) have emerged to improve the shelf life and meat safety. Non-thermal technologies are becoming increasingly important because of their advantages in maintaining low temperature, meat nutrition, and short processing time. Especially, pulsed light and pulsed electric field treatment induce few sensory and physiological changes in high fat and protein meat products, making them suitable for the application. Many research results showed that these non-thermal technologies may keep meat fresh and maintain heat-sensitive elements in meat products.

Effect of Single and Two-Cycles of High Hydrostatic Pressure Treatment on the Safety and Quality of Chicken Burgers

The aim of this study was to evaluate the effect of two cycles of high hydrostatic pressure (HHP) treatment on chicken burgers after storage at refrigeration (4 °C) for 15 days, in comparison with the application of a single cycle of high hydrostatic pressure treatment, as well as compared with non-treated burgers. Samples were treated at 400 and 600 MPa and a single or two cycles were applied. The results showed that mesophilic, psychrotrophic molds, yeast, and coliforms were significantly reduced by HHP treatment (p < 0.05), 600 MPa/1 s (2 cycles) leading to the maximum inactivation. Concerning color parameters, a significant increase in lightness/paleness (L*) and a reduction in redness (a*) and yellowness (b*) (p < 0.05) was observed in samples as 600 MPa were applied. Moreover, 600 MPa/1 s (2 cycles) caused the highest differences in the meat color (ΔE processing) of the chicken burgers. No HHP treatment significantly affected the degree of oxidation of samples (p > 0.05). However, 600 MPa/1 s (2 cycles) samples showed the highest values of TBA RS content after 15 days of storage (p < 0.05). Finally, the appearance, odor, taste, and global perception of cooked burgers were similar in all groups (p < 0.05). Therefore, treatments at 600 MPa produced a significant reduction in microbial counts but modified the color; however, the discoloration effect in the cooked burgers was not noticed by panelists.

Complete Genome Sequencing and Bacteriocin Functional Characterization of Pediococcus ethanolidurans CP201 from Daqu

This study aims to sequence the whole genome of Pediococcus ethanolidurans CP201 isolated from Daqu and determine the anti-corrosion ability of bacteriocins on chicken breast. The whole genome sequence information of P. ethanolidurans CP201 was analyzed, and its gene structure and function were explored. It was found that gene1164 had annotations in the NR, Pfam, and Swiss-Prot databases, and was related to bacteriocins. The exogenous expression of the bacteriocin gene Pediocin PE-201 was analyzed based on the pET-21b vector and the host BL21, and the corresponding bacteriocin was successfully expressed under the induction of IPTG. After purification by NI-NTA column, enterokinase treatment, membrane dialysis concentration treatment, and SDS-PAGE electrophoresis, the molecular weight was about 6.5 kDa and the purity was above 90%. By applying different concentrations of bacteriocin to chicken breast with different levels of contamination, the control of pathogenic bacteria, the ordinary contamination level (OC) group, and the high contamination level (MC) group could be completely achieved with 25 mg/L bacteriocin. In conclusion, the bacteriocin produced by the newly isolated CP201 can be applied to the preservation of meat products to prevent the risk of food-borne diseases.

Phenotypic and genotypic characterization of antibiotic resistance of Salmonella Heidelberg in the south of Brazil

Salmonella is the main human pathogen present in the poultry chain. Salmonella Heidelberg is one of the most important serovars for public health since it has been frequently isolated in broiler chickens from different countries and may present multidrug resistance (MDR). This study was carried out with 130 S. Heidelberg isolates collected from pre-slaughter broiler farms in 2019 and 2020 in 18 cities from three Brazilian states to study relevant aspects regarding their genotypic and phenotypic resistance. The isolates were tested and identified using somatic and flagellar antiserum (0:4, H:2, and H:r), and an antimicrobial susceptibility test (AST) was performed against 11 antibiotics for veterinary use. The strains were typed by Enterobacterial Repetitive Intergenic Consensus (ERIC)-PCR, and representatives of the main clusters of the identified profiles were sequenced by Whole Genome Sequencing (WGS). AST results showed that all isolates were resistant to sulfonamide, 54 % (70/130) were resistant to amoxicillin, and only one was sensitive to tetracycline. Twelve isolates (15.4 %) were MDR. The dendrogram obtained from the ERIC-PCR showed that the strains were grouped into 27 clusters with similarity above 90 %, with some isolates showing 100 % similarity but with different phenotypic profiles of antimicrobial resistance. Identical strains collected on the same farm on other dates were identified, indicating that they were residents. WGS identified 66 antibiotic-resistance genes. The sul2 (present in all sequenced samples) and tet(A) genes were highlighted and validated in the experimental analysis. The fosA7 gene was also identified in all sequenced samples, but resistance was not observed in the phenotypic test, possibly due to the heteroresistance of the S. Heidelberg strains evaluated. Considering that chicken meat is one of the most consumed meats in the world, the data obtained in the present study can corroborate the mapping of the origin and trends of antimicrobial resistance.

Effect of ultra-high pressure on the relationship between endogenous proteases and protein degradation of Yesso scallop (Mizuhopecten yessoensis) adductor muscle during iced storage

•

UHP treatment slowed down the texture deterioration during iced storage.

•

UHP treatment reduced protein degradation and oxidation.

•

Endogenous enzyme activity was closely related to protein degradation and denaturation.

This study aimed to explore the effect of ultra-high pressure (UHP) treatment (100–500 MPa, 5 min, 15 ± 1 ℃) on the relationship between endogenous proteases and protein degradation of Yesso scallop (Mizuhopecten yessoensis) adductor muscle during iced storage for 28 days. Our findings showed that the UHP treatment kept the water holding capacity stable, increased the hardness and decreased the springiness of scallop adductor muscle during iced storage. 400 and 500 MPa UHP treatments caused protein denaturation and oxidation significantly, decreased protein degradation rate and inhibited the activities of endogenous proteases. According to the correlation analysis, the activities of cathepsin B, D, H, L, calpain and serine protease were positively correlated with TCA-soluble peptides. The activities of endogenous proteases were significantly correlated with protein degradation. Therefore, the effect of UHP on endogenous protease caused the protein degradation rate to slow down and prevented the texture deterioration in scallops.

Emerging Trends for Nonthermal Decontamination of Raw and Processed Meat: Ozonation, High-Hydrostatic Pressure and Cold Plasma

Meat may contain natural, spoilage, and pathogenic microorganisms based on the origin and characteristics of its dietary matrix. Several decontamination substances are used during or after meat processing, which include chlorine, organic acids, inorganic phosphates, benzoates, propionates, bacteriocins, or oxidizers. Unfortunately, traditional decontamination methods are often problematic because of their adverse impact on the quality of the raw carcass or processed meat. The extended shelf-life of foods is a response to the pandemic trend, whereby consumers are more likely to choose durable products that can be stored for a longer period between visits to food stores. This includes changing purchasing habits from “just in time” products “for now” to “just in case” products, a trend that will not fade away with the end of the pandemic. To address these concerns, novel carcass-decontamination technologies, such as ozone, high-pressure processing and cold atmospheric plasma, together with active and clean label ingredients, have been investigated for their potential applications in the meat industry. Processing parameters, such as exposure time and processing intensity have been evaluated for each type of matrix to achieve the maximum reduction of spoilage microorganism counts without affecting the physicochemical, organoleptic, and functional characteristics of the meat products. Furthermore, combined impact (hurdle concept) was evaluated to enhance the understanding of decontamination efficiency without undesirable changes in the meat products. Most of these technologies are beneficial as they are cost-effective, chemical-free, eco-friendly, easy to use, and can treat foods in sealed packages, preventing the product from post-process contamination. Interestingly, their synergistic combination with other hurdle approaches can help to substitute the use of chemical food preservatives, which is an aspect that is currently quite desirable in the majority of consumers. Nonetheless, some of these techniques are difficult to store, requiring a large capital investment for their installation, while a lack of certification for industrial utilization is also problematic. In addition, most of them suffer from a lack of sufficient data regarding their mode of action for inactivating microorganisms and extending shelf-life stability, necessitating a need for further research in this area.

Recent developments in the use of cold plasma, high hydrostatic pressure, and pulsed electric fields on microorganisms and viruses in seafood

Non-thermal processing methods, such as cold plasma (CP), high pressure processing (HPP) and pulsed electric fields (PEF), have been proposed for natural and fresh-like foods to inactivate microorganisms at nearly-ambient or moderate temperature. Since natural, safe, and healthy foods with longer shelf-life are increasingly demanded, these requests are challenging to fulfill by using current thermal processing technologies. Thus, novel preservation technologies based on non-thermal processing methods are required. The aim of this article is to provide recent developments in maintaining seafood safety via CP, HHP, and PEF technologies, as well as their mechanisms of action regarding contamination with food-borne microorganisms. Their application to control parasites, spores and the possibility to eradicate the hazard of SARS-CoV-2 transmission through seafood products are also discussed. CP, HHP, and PEF have been applied to inactivate food-borne microorganisms in the seafood industry. However, the drawbacks for each emerging technology have also been reported. To ensure safety and maintain quality of seafood products, the combination of these processing techniques with natural antimicrobial agents or existing thermal methods may be more applicable in the case of the seafood industry. Further studies are required to examine the effects of these methods on viruses, parasites, and SARS-CoV-2 in seafood.

Advances, Applications, and Comparison of Thermal (Pasteurization, Sterilization, and Aseptic Packaging) against Non-Thermal (Ultrasounds, UV Radiation, Ozonation, High Hydrostatic Pressure) Technologies in Food Processing

Nowadays, food treatment technologies are constantly evolving due to an increasing demand for healthier and tastier food with longer shelf lives. In this review, our aim is to highlight the advantages and disadvantages of some of the most exploited industrial techniques for food processing and microorganism deactivation, dividing them into those that exploit high temperatures (pasteurization, sterilization, aseptic packaging) and those that operate thanks to their inherent chemical–physical principles (ultrasound, ultraviolet radiation, ozonation, high hydrostatic pressure). The traditional thermal methods can reduce the number of pathogenic microorganisms to safe levels, but non-thermal technologies can also reduce or remove the adverse effects that occur using high temperatures. In the case of ultrasound, which inactivates pathogens, recent advances in food treatment are reported. Throughout the text, novel discoveries of the last decade are presented, and non-thermal methods have been demonstrated to be more attractive for processing a huge variety of foods. Preserving the quality and nutritional values of the product itself and at the same time reducing bacteria and extending shelf life are the primary targets of conscious producers, and with non-thermal technologies, they are increasingly possible.

A systematic review of clean-label alternatives to synthetic additives in raw and processed meat with a special emphasis on high-pressure processing (2018-2021)

The meat industry is continuously facing challenges with food safety, and quality losses caused by thermal processing. This systematic review reports recent clean label approaches in high-pressure production of meat. A literature search was performed using Scopus, Web of Science, PubMed, and Springer databases for studies published in 2018-2021. In this regard, 69 articles were assessed out of 386 explored research articles in the identified stage. The findings indicate that most of the earlier work on high-pressure processing (HPP) focused on physicochemical and sensorial meat quality rather than providing nutritional aspects and clean-label solutions. However, few advanced studies report effective and innovative solutions to develop low salt/fat, and reduced nitrite for raw and cured meat products. HPP could help on increasing the shell life by five times in meat products; however, it depends on the formulation and packaging, etc. HPP can also preserve nutrients by using this non-thermal technology and reduce food waste as once the shelf life of products is known, it easily reduces the shrinkage in the marketplace. This review explores the latest trend of experimental research in high-pressure processing alone, or multi-hurdle techniques employed to increase the effect of clean-label ingredients for enhanced meat safety/quality.

Effects of High Hydrostatic Pressure on the Conformational Structure and Gel Properties of Myofibrillar Protein and Meat Quality: A Review

In meat processing, changes in the myofibrillar protein (MP) structure can affect the quality of meat products. High hydrostatic pressure (HHP) has been widely utilized to change the conformational structure (secondary, tertiary and quaternary structure) of MP so as to improve the quality of meat products. However, a systematic summary of the relationship between the conformational structure (secondary and tertiary structure) changes in MP, gel properties and product quality under HHP is lacking. Hence, this review provides a comprehensive summary of the changes in the conformational structure and gel properties of MP under HHP and discusses the mechanism based on previous studies and recent progress. The relationship between the spatial structure of MP and meat texture under HHP is also explored. Finally, we discuss considerations regarding ways to make HHP an effective strategy in future meat manufacturing.

High hydrostatic pressure combined with moisture regulators improves the tenderness and quality of beef jerky

The influence of high hydrostatic pressure (HHP) at different pressure levels (0.1, 100, 200, and 300 MPa) combined with moisture regulators (MR) on the tenderness, water content, and quality of beef jerky was investigated. HHP treatment reduced the shear force (SF) of beef jerky (P < 0.05). The beef jerky treated with MR+HHP exhibited higher tenderness than the beef jerky treated only with HHP (P < 0.05). The MR+HHP samples had significantly higher moisture content than the HHP samples (P > 0.05) when the water activity was maintained at approximately 0.7. MR+HHP contributed to a shorter T₂₁ value and a higher P₂₁ value, which indicated an improvement in the water-binding ability of the beef muscle. Analysis of the microstructure showed that MR+HHP led to the fracture of the Z-line and destruction of the sarcomere structure. Sensory analysis showed that MR+HHP-200 samples had significantly higher tenderness and overall acceptable scores than other samples (P < 0.05).

Bacteriophages as tools for biofilm biocontrol in different fields

Microbial biofilms are difficult to control due to the limited accessibility that antimicrobial drugs and chemicals have to the entrapped inner cells. The extracellular matrix, binds water, contributes to altered cell physiology within biofilms and act as a barrier for most antiproliferative molecules. Thus, new strategies need to be developed to overcome biofilm vitality. In this review, based on 223 documents, the advantages, recommendations, and limitations of using bacteriophages as 'biofilm predators' are presented. The plausibility of using phages (bacteriophages and mycoviruses) to control biofilms grown in different environments is also discussed. The topics covered here include recent historical experiences in biofilm control/eradication using phages in medicine, dentistry, veterinary, and food industries, the pros and cons of their use, and the development of microbial resistance/immunity to such viruses.

Non-thermal Technologies for Food Processing

Food is subjected to various thermal treatments during processes to enhance its shelf-life. But these thermal treatments may result in deterioration of the nutritional and sensory qualities of food. With the change in the lifestyle of people around the globe, their food needs have changed as well. Today's consumer demand is for clean and safe food without compromising the nutritional and sensory qualities of food. This directed the attention of food professionals toward the development of non-thermal technologies that are green, safe, and environment-friendly. In non-thermal processing, food is processed at near room temperature, so there is no damage to food because heat-sensitive nutritious materials are intact in the food, contrary to thermal processing of food. These non-thermal technologies can be utilized for treating all kinds of food like fruits, vegetables, pulses, spices, meat, fish, etc. Non-thermal technologies have emerged largely in the last few decades in food sector.

Combined Effect of Impregnation with an Origanum vulgare Infusion and Osmotic Treatment on the Shelf Life and Quality of Chilled Chicken Fillets

The scope of this work is the study of a combined process including a dipping step into an oregano (Origanum vulgare ssp. hirtum) infusion (OV) followed by osmotic treatment of chicken fillets at 15 °C. Chicken fillets were immersed in an osmotic solution consisting of 40% glycerol and 5% NaCl with (OV/OD) and without (OD) prior antioxidant enrichment in a hypotonic oregano solution. A comparative shelf life study of all the samples (untreated, OD and OV/OD treated) was then conducted at 4 °C in order to assess the impact of this process on the quality and shelf life of chilled chicken fillets. Microbial growth, lipid oxidation and color/texture changes were measured throughout the chilled storage period. Rates of microbial growth of pretreated fillets were significantly reduced, mainly as a result of water activity decrease (OD step). Rancidity development closely related to off odors and sensory rejection was greatly inhibited in treated fillets owing to both inhibitory factors (OD and OV), with water-soluble phenols (OV step) exhibiting the main antioxidant effect. Shelf life of treated chicken fillets exhibited a more than three-fold increase as compared to the untreated samples based on both chemical and microbial spoilage indices, maintaining a positive and pleasant sensory profile throughout the storage period examined.

Physical Methods for the Decontamination of Meat Surfaces

Purpose of Review

The market for minimally processed products is constantly growing due to consumer demand. Besides food safety and increased shelf life, nutritional value and sensory appearance also play a major role and have to be considered by the food processors. Therefore, the purpose of the review was to summarize recent knowledge about important alternative non-thermal physical technologies, including both those which are actually applied (e.g. high-pressure processing and irradiation) and those demonstrating a high potential for future application in raw meat decontamination (e.g. pulsed light UV-C and cold plasma treatment). The evaluation of the methods is carried out with respect to efficiency, preservation of food quality and consumer acceptance.

Recent Findings

It was evident that significantly higher bacterial reductions are achieved with gamma-ray, electron beam irradiation and high pressure, followed by pulsed light, UV-C and cold plasma, with ultrasound alone proving the least effective. As a limitation, it must be noted that sensory deviations may occur and that legal approvals may have to be applied for.

Summary

In summary, it can be concluded that physical methods have the potential to be used for decontamination of meat surfaces in addition to common hygiene measures. However, the aim of future research should be more focused on the combined use of different technologies to further increase the inactivation effects by keeping meat quality at the same time.