Preparation and characterization of Eucommia ulmoides seed oil O/W nanoemulsion by dynamic high-pressure microfluidization

Fabrication of cinnamon essential oil nanoemulsions with high antibacterial activities via microfluidization

The high volatility and hydrophobicity of cinnamon essential oils (CiEO) limited their practical application. To enhance their stability and antibacterial activity, nanoemulsions encapsulating CiEO were prepared using hydroxypropyl-β-cyclodextrin/lauroyl arginate (HPCD/LAE) inclusion complexes through high-pressure microfluidization (HPM). Effects of HPM parameters on the stability and antibacterial properties of nanoemulsion were investigated. Results revealed that increased processing pressure and cycle numbers were associated with reduced droplet size and greater homogeneity in CiEO distribution. Storage and thermal stability were optimized at 100 MPa and seven cycles. Moreover, the nanoemulsions showed strong synergistic antibacterial against E. coli (19.79 mm) and S. aureus (23.61 mm) compared with LAE (11.52 mm and 12.82 mm, respectively) and CiEO alone (13.26 mm and 17.68 mm, respectively). This study provided new information for constructing CiEO nanoemulsion, which is suitable for use in the food industry.

Preparation and Characterization of a Hypoglycemic Complex of Gallic Acid-Antarctic Krill Polypeptide Based on Polylactic Acid-Hydroxyacetic Acid (PLGA) and High-Pressure Microjet Microencapsulation

Gallic acid-Antarctic krill peptides (GA-AKP) nanocapsules (GA-AKP-Ns) were prepared using a dual delivery system with complex emulsion as the technical method, a high-pressure microjet as the technical means, polylactic acid-hydroxyacetic acid (PLGA) as the drug delivery vehicle, and GA-AKP as the raw material for delivery. This study aimed to investigate the effects of microjet treatment and the concentration of PLGA on the physicochemical properties and stability of the emulsion. Under optimal conditions, the physicochemical properties and hypoglycemic function of nano-microcapsules prepared after lyophilization by the solvent evaporation method were analyzed. Through the microjet treatment, the particle size of the emulsion was reduced, the stability of the emulsion was improved, and the encapsulation rate of GA-AKP was increased. The PLGA at low concentrations decreased the particle size of the emulsion, while PLGA at high concentrations enhanced the encapsulation efficiency of the emulsion. Additionally, favorable results were obtained for emulsion preparation through high-pressure microjet treatment. After three treatment cycles with a PLGA concentration of 20 mg/mL and a microjet pressure of 150 MPa (manometric pressure), the emulsion displayed the smallest particle size (285.1 ± 3.0 nm), the highest encapsulation rates of GA (71.5%) and AKP (85.2%), and optimal physical stability. GA-AKP was uniformly embedded in capsules, which can be slowly released in in vitro environments, and effectively inhibited α-amylase, α-glucosidase, and DPP-IV at different storage temperatures. This study demonstrated that PLGA as a carrier combined with microjet technology can produce excellent microcapsules, especially nano-microcapsules, and these microcapsules effectively improve the bioavailability and effectiveness of bioactive ingredients.

Microfluidization of soybean protein isolate-tannic acid complex stabilized emulsions: Characterization of emulsion properties, stability and in vitro digestion properties

Emulsion stability and sustained-release can be improved with a non-covalent complexing of a soybean protein isolate (SPI) with -tannic acid (TA) and dynamic high-pressure microfluidization (DHPM). The microstructure, physicochemical properties, and interfacial properties were investigated. The properties of the DHPM-treated emulsions were improved significantly, with the 120 MPa DHPM-treated SPI-TA emulsion (SPI-TA 120) having the best microstructure. The highest interface protein content, viscosity and viscoelasticity at 120 MPa of pressure facilitated the stability of the emulsion. The oxidation kinetics of emulsions was established. It was demonstrated that the oxidation stability of SPI-TA 120 was higher than SPI and SPI-TA emulsions without DHPM treatment. In addition, DHPM-treated SPI-TA emulsions showed the most positive effect on the slow release of curcumin compared to the control group. The formation of non-covalent protein complexes with polyphenols and DHPM treatment effectively increases the stability of emulsions.

Advances in embedding techniques of anthocyanins: Improving stability, bioactivity and bioavailability

The health benefits of anthocyanins have attracted extensive research interest. However, anthocyanins are sensitive to certain environmental and gastrointestinal conditions and have low oral bioavailability. It has been reported that delivery systems made in different ways could improve the stability, bioavailability and bioactivity of anthocyanins. This present review summarizes the factors affecting the stability of anthocyanins and the reasons for poor bioavailability, and various technologies for encapsulation of anthocyanins including microcapsules, nanoemulsions, microemulsions, Pickering emulsions, nanoliposomes, nanoparticles, hydrogels and co-assembly with amphiphilic peptides were discussed. In particular, the effects of these encapsulation technologies on the stability, bioavailability and bioactivities of anthocyanins in vitro and in vivo experiments are reviewed in detail, which provided scientific insights for anthocyanins encapsulation methods. However, the application of anthocyanins in food industry as well as the biological fate and functional pathways in vivo still need to be further explored.

Influence of hydrocolloids and natural emulsifier in the physical stability of UHT oat beverage

This study aimed to improve the physical stability of ultra-high temperature (UHT) oat beverage by adding hydrophilic colloids (guar gum [GG] and xanthan gum [XG]) and a natural emulsifier (soluble soybean polysaccharide [SSPS]). The stability of the oat beverage was characterized by particle size, zeta potential, rheological properties, Fourier-transform infrared (FTIR) spectroscopy, backscattered light intensity (ΔBS), and microstructure. The results indicated that XG reduced the average particle size and size distribution of the beverage, indicating that XG could prevent particle aggregation. GG increases the apparent viscosity of the oat beverage without affecting the zeta potential. When SSPS was added to the oat beverage, it increased the absolute value of the zeta potential and the infrared absorption peak intensity, while the average particle size and backscattered light intensity (ΔBS) decreased, resulting in a more uniform microstructure. The zeta potential reached a maximum value of 32.12 when GG, XG, and SSPS were combined, indicating that the physical stability of the oat beverage was effectively improved when all three were present simultaneously. This study may provide some suggestions for the industrial production of low-viscosity cereal beverages with good stability.

Fabrication, characterization, and interventions of protein, polysaccharide and lipid-based nanoemulsions in food and nutraceutical delivery applications: A review

The fabrication and application of nanoemulsions for incorporating and delivering diverse bioactive compounds, particularly hydrophobic substances, is becoming an increasing focus of research with the potential to improve the nutritional and health status of individuals. Constant advancements in nanotechnological approaches aid in the creation of nanoemulsions using diverse biopolymers such as proteins, peptides, polysaccharides, and lipids to improve the stability, bioactivity, and bioavailability of active hydrophilic and lipophilic compounds. This article provides a comprehensive overview of various techniques used to create and characterize nanoemulsions as well as theories for understanding their stability. The article also highlights the advancement of nanoemulsions in boosting the bioaccessibility of nutraceuticals to help advance their potential use in various food and pharmaceutical formulations.

Chia Oil and Mucilage Nanoemulsion: Potential Strategy to Protect a Functional Ingredient

Nanoencapsulation can increase the stability of bioactive compounds, ensuring protection against physical, chemical, or biological degradations, and allows to control of the release of these biocompounds. Chia oil is rich in polyunsaturated fatty acids-8% corresponds to omega 3 and 19% to omega 6-resulting in high susceptibility to oxidation. Encapsulation techniques allow the addition of chia oil to food to maintain its functionality. In this sense, one strategy is to use the nanoemulsion technique to protect chia oil from degradation. Therefore, this review aims to present the state-of-the-art use of nanoemulsion as a new encapsulation approach to chia oil. Furthermore, the chia mucilage-another chia seed product-is an excellent material for encapsulation due to its good emulsification properties (capacity and stability), solubility, and water and oil retention capacities. Currently, most studies of chia oil focus on microencapsulation, with few studies involving nanoencapsulation. Chia oil nanoemulsion using chia mucilage presents itself as a strategy for adding chia oil to foods, guaranteeing the functionality and oxidative stability of this oil.

Investigation on the effect of thermal sterilization versus non-thermal sterilization on the quality parameters of jujube juice fermented by Lactobacillus plantarum

This study aimed to evaluate the jujube juice treated by four different sterilization treatments as substrates for producing a probiotic beverage fermented by Lactobacillus plantarum (L. plantarum): sterilization by autoclaving (SA at 0.1 MPa,121 °C, and 20 min), pasteurization (PS at 85 °C/30 min), cold plasma sterilization (CPS at 700 W/120 s) and pulsed strong light sterilization (PLS at 1.0 Hz, 600 J, and 10 times), while jujube juice without sterilization treatment used as control (CK). The results showed that the growth ability of L. plantarum in jujube juice was not affected by different sterilization treatments. After SA and PS treatment, the particle size of jujube juice increased by 440.51% and 222.29%, respectively, and the reducing sugar content decreased by 33.83% and 24.51%, respectively. Compared with SA and PS, PLS and CPS were beneficial to improve the stability of jujube juice, and tartaric acid content in jujube juice was significantly increased after CPS treatment. There was no significant difference in sensory and nutritional quality between PLS treated jujube juice and control, and the color of PLS treated jujube juice was significantly better than that of the other three sterilization treatments. The research indicated that PLS treatment could be a prospective sterilization method applied in the processing of fermented jujube juice.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05358-8.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Composition analysis and microencapsulation of Eucommia ulmoides seed oil

BACKGROUND

Eucommia ulmoides seed oil is a functional health oil with a high content of unsaturated fatty acids. However, excessively high content of unsaturated fatty acids can cause E. ulmoides seed oil to easily spoil. Microencapsulation technology can effectively encapsulate substances, thereby prolonging the spoilage time of oil products.

METHODS

In the present study, E. ulmoides seed oil from different manufacturers were analyzed by Agilent 7890B-5977A gas chromatography-mass spectrometry. Encapsulation efficiency, yield rate, and scanning electron microscopy results between microcapsules prepared use different wall materials and different methods (spray drying and complex coagulation) were compared to determine the best preparation process for microcapsules. The Wantong 892 professional oil oxidation stability tester was used to measure the induced oxidation time of the E. ulmoides seed oil and microcapsules.

CONCLUSION

E. ulmoides seed oil comprises > 80% unsaturated fatty acids with a high α-linolenic acid content, followed by linoleic acid. The most promising combination was chitosan:gum arabic at 1:8 as the wall material and complex coagulation. The best preparation had a wall material concentration, stirring speed, aggregation pH, and core-to-wall ratio of 2.5%, 500 rpm, 4.2, and 1:4, respectively. Microcapsules prepared under these conditions exhibited higher yield and encapsulation efficiency (94.0% and 73.3%, respectively). The induced oxidation time of the E. ulmoides seed oil and microcapsules were 3.8 h and 13.9 h, respectively, indicating that microencapsulation can increase the oxidation induction time of this oil.

Effect of the oat β-glucan on the development of functional quinoa (Chenopodium quinoa wild) milk

This study aimed to produce novel plant-based milk from quinoa with the addition of oat β-glucan (OGB). The stability of quinoa milk was characterized by zeta potential, particle size, separation index (SI), rheological property, backscattered light intensity (ΔBS), and microstructure. Results showed that OGB addition efficiently prevented the phase separation of quinoa milk, and the highest SI and zeta potential values were obtained at the optimal pH 6.0. Quinoa milk presented a higher apparent viscosity and a narrower particle distribution with the increased OGB concentration, however, it did not affect the zeta potential. Moreover, OGB improved the storage stability with an increased SI and a ΔBS. Microstructure analysis suggested that OGB could prevent phase separation by constructing a network structure, and an increased amount of OGB led to forming a gel-like structure. An excessive viscosity would decrease the sensory acceptance, therefore the final OGB concentration of 16% was selected.

Nutraceutical delivery through nano-emulsions: General aspects, recent applications and patented inventions

Nanostructured emulsions have a significant potential for encasing, transport and delivery of hydrophilic and lipophilic nutraceuticals and other bioactive compounds by providing enhanced stability and functionality in food and pharmaceutical applications. As highlighted in recent researches, essential fatty acids (EFA) and oils (EO), antioxidants, vitamins, minerals, pro and prebiotics, and co-enzymes, are common bioactives encapsulated in nanoscale delivery systems in order to protect them from degradation during processing and storage, and to improve bioavailability after their consumption. Nanoemulsions (NEs) as delivery systems for nutraceuticals comprise either oil-in-water (O/W) or water-in-oil (W/O) biphasic dispersion with nano-sized droplets, which are stabilized through an active surfactant. Both high- and low- energy methods are used to produce well-structured and stable NEs with advanced structural and rheological features. The in vitro and in vivo studies are focused to assess the nutraceutical releasing profile, gastrointestinal transportation and cytotoxicity of nutraceutical loaded NE. Within the last three decades, a number of NE systems have been developed for certain purposes and submitted for patent approval. Currently, there are many issued patents published as well as and applications under process. This review focus on the current status of food-grade NEs in terms of formation, characterization, relevant applications of nutraceutical delivery, and the recent developments including patented systems.

Effect of environmental stresses on physicochemical properties of ALA oil-in-water nanoemulsion system prepared by emulsion phase inversion

To solve the stability and oxidation issues of alpha-linolenic acid (ALA), this study focused on developing ALA nanoemulsion system (ALA-NE, oil-in-water) and evaluating the effect of environmental conditions on physical stability and the effect of antioxidants on oxidative stability. The physicochemical properties of nanoemulsions were measured at different conditions, including particle diameter, zeta potential, retention rate and peroxidation value (POV). The particle diameter increased significantly and the retention rate decreased after 25 days storage under the conditions of high temperature and metal ions. However, the influence of ionic strength, pH and light was insignificant. As an antioxidant, Vitamin E was more effective at retarding lipid oxidation of nanoemulsions than that of vitamin C. These results provided reference information in preparing effective and stable ALA-NE systems and enlarging the application fields.