Roles of four enzyme crosslinks on structural, thermal and gel properties of potato proteins

Hyaluronic acid promotes heat-induced gelation of ginkgo seed proteins

This study aimed to investigate how varying concentrations (0.01-0.5 %, w/v) and molecular weights (50, 500, 1500 kDa) of hyaluronic acid (HA) affect the physicochemical properties of heat-induced ginkgo seed protein isolate (GSPI)-HA composite gel. Incorporating HA increased viscosity (up to 14 times) and charge (up to 23 %) of GSPI-HA aggregates, while reducing particle size (up to 31 %) and improving gel texture, particularly with high molecular weight HA. However, high concentrations (0.5 %, w/v) of HA weakened gel texture. Non-covalent bonds primarily drive the formation of a continuous gel network between HA and GSPI, resulting in small pores and enhanced hydration properties. With increasing HA molecular weight, non-covalent interactions between GSPI and HA increased, leading to improved gel thermal stability. Overall, the study suggests that manipulating the molecular weight and concentration of HA can enhance the gelling properties of GSPI, leading to the development of a diverse array of GSPI-HA composite gels with varied properties.

The emulsifying capacity and stability of potato proteins and peptides: A comprehensive review

The potato has recently attracted more attention as a promising protein source. Potato proteins are commonly extracted from potato fruit juice, a byproduct of starch production. Potato proteins are characterized by superior techno-functional properties, such as water solubility, gel-forming, emulsifying, and foaming properties. However, commercially isolated potato proteins are often denatured, leading to a loss of these functionalities. Extensive research has explored the influence of different conditions and techniques on the emulsifying capacity and stability of potato proteins. However, there has been no comprehensive review of this topic yet. This paper aims to provide an in-depth overview of current research progress on the emulsifying capacity and stability of potato proteins and peptides, discussing research challenges and future perspectives. This paper discusses genetic diversity in potato proteins and various methods for extracting proteins from potatoes, including thermal and acid precipitation, salt precipitation, organic solvent precipitation, carboxymethyl cellulose complexation, chromatography, and membrane technology. It also covers enzymatic hydrolysis for producing potato-derived peptides and methods for identifying potato protein-derived emulsifying peptides. Furthermore, it reviews the influence of factors, such as physicochemical properties, environmental conditions, and food-processing techniques on the emulsifying capacity and stability of potato proteins and their derived peptides. Finally, it highlights chemical modifications, such as acylation, succinylation, phosphorylation, and glycation to enhance emulsifying capacity and stability. This review provides insight into future research directions for utilizing potato proteins as sustainable protein sources and high-value food emulsifiers, thereby contributing to adding value to the potato processing industry.

Effects of Laccase and Transglutaminase on the Physicochemical and Functional Properties of Hybrid Lupin and Whey Protein Powder

Plant-based protein is considered a sustainable protein source and has increased in demand recently. However, products containing plant-based proteins require further modification to achieve the desired functionalities akin to those present in animal protein products. This study aimed to investigate the effects of enzymes as cross-linking reagents on the physicochemical and functional properties of hybrid plant- and animal-based proteins in which lupin and whey proteins were chosen as representatives, respectively. They were hybridised through enzymatic cross-linking using two laccases (laccase R, derived from Rhus vernicifera and laccase T, derived from Trametes versicolor) and transglutaminase (TG). The cross-linking experiments were conducted by mixing aqueous solutions of lupin flour and whey protein concentrate powder in a ratio of 1:1 of protein content under the conditions of pH 7, 40 °C for 20 h and in the presence of laccase T, laccase R, or TG. The cross-linked mixtures were freeze-dried, and the powders obtained were assessed for their cross-linking pattern, colour, charge distribution (ζ-potential), particle size, thermal stability, morphology, solubility, foaming and emulsifying properties, and total amino acid content. The findings showed that cross-linking with laccase R significantly improved the protein solubility, emulsion stability and foaming ability of the mixture, whereas these functionalities were lower in the TG-treated mixture due to extensive cross-linking. Furthermore, the mixture treated with laccase T turned brownish in colour and showed a decrease in total amino acid content which could be due to the enzyme's oxidative cross-linking mechanism. Also, the occurrence of cross-linking in the lupin and whey mixture was indicated by changes in other investigated parameters such as particle size, ζ-potential, etc., as compared to the control samples. The obtained results suggested that enzymatic cross-linking, depending on the type of enzyme used, could impact the physicochemical and functional properties of hybrid plant- and animal-based proteins, potentially influencing their applications in food.

Enhancing the Physicochemical Attributes of Dough and Noodles through the Incorporation of Bacillus vallismortis Laccase

This investigation examined how the Bacillus vallismortis laccase (rBVL-MRL522) influenced the physicochemical characteristics, structural attributes, and functional capabilities of both dough and noodles. Incorporating rBVL-MRL522 (1 U/g) did not lead to a substantial change in the water absorption of wheat flour. However, the introduction of rBVL-MRL522 caused a significant elongation in the formation time of wheat flour dough, extending it by 88.9%, and also resulted in a 50% increase in the stabilization duration of wheat flour dough. Furthermore, adding rBVL-MRL522 led to a proportional rise in both the elastic and viscous moduli (G'' of the dough, signifying that r-BVL (rBVL-MRL522) has a beneficial effect on the gluten strength of the dough. Integrating rBVL-MRL522 promoted the consolidation of the gluten-based cross-linked structure within the dough, decreasing the size of starch particles and, more evenly, the dispersion of these starch particles. In the noodle processing, adding rBVL-MRL522 at a rate of 1 U/g raised the L* value of the noodles by 2.34 units compared to the noodles prepared without the inclusion of rBVL-MRL522. Using a greater amount of rBVL-MRL522 (2 U/g) substantially increased the hardness of the noodles by 51.31%. Additionally, rBVL-MRL522 showed a noteworthy enhancement in the elasticity, cohesiveness, and chewiness of the noodles. In conclusion, rBVL-MRL522 promoted the cross-linking gluten, leading to a more extensive and condensed three-dimensional network structure in raw and cooked noodles. As a result, this study offers valuable insights into the environmentally friendly processing of dough and associated products.

Improving the Microstructural and Rheological Properties of Frozen Unfermented Wheat Dough with Laccase and Ferulic Acid

The quality deterioration that is induced by freezing treatment limits the development of frozen dough technology for standardized and delayed baking. In this study, laccase (LAC) and ferulic acid (FA) were employed to improve the rheological properties and microstructure of frozen unfermented dough. The results showed that the dough with LAC + FA had a lower softening degree than the dough with FA alone. Correspondingly, LAC + FA incorporation enhanced the viscoelastic behavior of frozen unfermented dough with better stability. Furthermore, a more uniform and homogeneous gluten network was observed in the LAC + FA-supplemented dough after 21 d of storage. The structural stability of the frozen gluten sample increased after LAC + FA treatment, possibly owing to an increase in the oxidation degree of FA. Moreover, LAC + FA treatment promoted the oxidation of the sulfhydryl groups to some extent, resulting in more extensive cross-linking. LAC + FA treatment hindered the protein conformational changes typically induced by frozen storage compared with LAC alone. Overall, LAC + FA treatment has a synergistic effect on enhancing the viscoelastic behaviors of frozen unfermented dough and inhibiting the conformational variation in frozen gluten; thus, it shows promise for improving frozen dough.

Gelation profile of laccase-crosslinked Bambara groundnut (Vigna subterranea) protein isolate

Enzymatic crosslinking has gained attention in improving plant protein heat-induced gels, which are composed of weak network structures. The aim of the study was to investigate the effect of laccase crosslinking on the rheological and microstructural properties of heat-induced Bambara groundnut protein gels. The rheological properties of laccase-modified Bambara groundnut protein isolate (BPI¹) gel formed in situ were investigated. Changes in viscoelastic properties were monitored during heating and cooling ramps and gel structure fingerprints were analyzed by frequency sweep. Laccase addition induced an initial protein structure breakdown (G″>G') at an enzyme dose-dependent (1-3 U/g) before gel formation and stabilization. Gel point temperatures were significantly decreased from 85°C to 29°C (∼3 folds) with increasing laccase activity (0 to 3 U/g protein, respectively). For laccase crosslinked gels, G' was substantially greater than G" (>1 log) with no dependency on angular frequency, which suggests the formation of relatively well-structured gels. The highest gel strength (tan δ of 0.09, G* of 555.51 kPa & An of 468.04 kPa) was recorded at a laccase activity of 2 U/g protein and the gels formed at this activity appeared homogeneous with compact lath sheet-like structure. The crosslinking effects of laccase were corroborated by the decrease in thiol and phenolic contents as well as the crosslinking of amino acids in model reactions. Overall, the use of laccase improved gel properties and significantly altered the gelation profile of BPI. Laccase-modified Bambara groundnut protein gels have potential to be used in food texture improvement and development of new food products. For instance, they can be used in plant-based milk products such as yoghurt and cheese.

Structural Analysis and Study of Gel Properties of Thermally-Induced Soybean Isolate-Potato Protein Gel System

Heat-induced composite gel systems consisting of different soybean protein isolate (SPI) and potato protein (PP) mixtures were studied to elucidate their "backbone" and property changes. This was achieved by comparing the ratio of non-network proteins, protein subunit composition, and aggregation of different gel samples. It was revealed that SPI was the "gel network backbone" and PP played the role of "filler" in the SPI-PP composite gel system. Compared with the composite gels at the same ratio, springiness and WHC decrease with PP addition. For hardness, PP addition showed a less linear trend. At the SPI-PP = 2/1 composite gel, hardness was more than doubled, while springiness and WHC did not decrease too much and increased the inter-protein binding. The hydrophobic interactions and electrostatic interactions and hydrogen bonding of the SPI gel system were enhanced. The scanning electron microscopy results showed that the SPI-based gel system was able to form a more compact and compatible gel network. This study demonstrates the use of PP as a potential filler that can effectively improve the gelling properties of SPI, thus providing a theoretical basis for the study of functional plant protein foods.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Physicochemical and Functional Modifications of Hemp Protein Concentrate by the Application of Ultrasonication and pH Shifting Treatments

According to the Food and Agriculture Organization (FAO), protein demand is expected to increase globally by around 40% by 2030 as a response to the world's population growth. Due to their clean label, vegan or vegetarian based applications, nutritional value, and cost-efficient properties, plant-based proteins have been widely studied. However, most of the alternatives currently found in the market have some challenges because of their poor solubility, emulsifying, gelling, and foaming attributes. Hemp seed protein has gained increasing attention due to its unique amino acids and fatty acids profiles. In this study, commercial HPC mixtures were adjusted to pH 2, 4, 6, 8, 10, and 12 followed by ultrasonication (US) for 5 min (5 s on: 5 s off) and incubated for an hour before neutralizing to pH 7. Following the treatments, the samples were analyzed for their hydrodynamic diameter, conductivity, zeta potential, polydispersity index, surface hydrophobicity, solubility, electrophoresis (SDS-PAGE), free sulfhydryl group, and optical characteristics. The samples treated with ultrasound at pH 8 and 10 significantly (p < 0.05) enhanced the solubility of the hemp seed protein by 12.12% and 19.05%, respectively. Similarly, the samples treated with ultrasonication and pH shifting at pH 6, 8, and 10 also significantly increased the amount of free sulfhydryl content (p < 0.05) to 41.6, 58.72, and 46.54 mmol/g from 32.8 mmol/g, respectively. This study shows that the application of ultrasonication and pH shifting is a promising alternative method to modify the functional properties of HPC and widen their applications in the food, cosmetics, and pharmaceutical industries.

Denatured pre-treatment assisted polyphenol oxidase-catalyzed cross-linking: effects on the cross-linking potential, structure, allergenicity and functional properties of OVA

To evaluate the impacts of denatured pre-treatments (heating and denaturants) on cross-linking and the combined effect of pre-treatment and cross-linking on the structure, allergenicity and functional properties of OVA, OVA was pre-treated in different ways and then cross-linked. Results showed that the cross-linking reaction was obviously promoted with heating at 100 °C for 5 min or 0.5% of SDS as the pretreatment. Due to the coordinated process of pre-treatments and cross-linking, the secondary structure was changed and the gastrointestinal digestion of OVA was promoted. Meanwhile, the emulsifying properties, foaming properties, and antioxidant properties of OVA were remarkably improved. Furthermore, the IgG and IgE binding capacities of OVA, as well as the OVA-induced degranulation capacity of KU812 were all significantly decreased. However, upon comparing the cross-linking assisted by two different pre-treatments, it was seen that heating at 100 °C for 5 min was better than being treated with 0.5% of SDS in reducing the potential allergenicity of OVA. Therefore, we concluded that heat denaturation (at 100 °C for 5 min) assisted enzymatic cross-linking may provide a new cross-linking method to develop hypoallergenic foods with good functional properties.

Functionality of Ingredients and Additives in Plant-Based Meat Analogues

Meat analogue research and development focuses on the production of sustainable products that recreate conventional meat in its physical sensations (texture, appearance, taste, etc.) and nutritional aspects. Minced products, like burger patties and nuggets, muscle-type products, like chicken or steak-like cuts, and emulsion products, like Frankfurter and Mortadella type sausages, are the major categories of meat analogues. In this review, we discuss key ingredients for the production of these novel products, with special focus on protein sources, and underline the importance of ingredient functionality. Our observation is that structuring processes are optimized based on ingredients that were not originally designed for meat analogues applications. Therefore, mixing and blending different plant materials to obtain superior functionality is for now the common practice. We observed though that an alternative approach towards the use of ingredients such as flours, is gaining more interest. The emphasis, in this case, is on functionality towards use in meat analogues, rather than classical functionality such as purity and solubility. Another trend is the exploration of novel protein sources such as seaweed, algae and proteins produced via fermentation (cellular agriculture).

Evaluation of a novel nano-size collagenous matrix film cross-linked with gallotannins catalyzed by laccase

The effect of hydrolysis degree of gallotannins (GT, 1 mg/g) on cross-linking of nano-size collagen catalyzed by laccase (12 U/g) was studied, and the antibacterial properties of GT hydrolysates (HGT)-laccase (Lac) collagen films on minced cod were also investigated. The results showed that the tensile strength of HGT-Lac films (87.23-100.77 MPa) was higher than those added HGT alone (85.59-95.58 MPa) under the same hydrolysis degree of GT. Compared to the denaturation temperature (78.05 °C) of pure nano-size collagen film without addition of HGT and laccase, the denaturation temperature of HGT (80.75-86.30 °C) and HGT-Lac (91.97-101.64 °C) films increased greatly, especially for HGT-Lac films. Moreover, both HGT and HGT-Lac films showed some mild antibacterial properties for minced cod during storage at 4 °C for 8 days. Therefore, the combination of HGT and laccase could improve the performance of nano-size collagen film and extend the application of collagen in biodegradable/edible packaging.

HTC of Wet Residues of the Brewing Process: Comprehensive Characterization of Produced Beer, Spent Grain and Valorized Residues

Steady consumption of beer results in a steady output of residues, i.e., brewer’s spent grain (BSG). Its valorization, using hydrothermal carbonization (HTC) seems sensible. However, a significant knowledge gap regarding the variability of this residue and its influence on the valorization process and its potential use in biorefineries exists. This study attempted to fill this gap by characterization of BSG in conjunction with the main product (beer), taking into accounts details of the brewing process. Moreover, different methods to assess the performance of HTC were investigated. Overall, the differences in terms of the fuel properties of both types of spent grain were much less stark, in comparison to the differences between the respective beers. The use of HTC as a pretreatment of BSG for subsequent use as a biorefinery feedstock can be considered beneficial. HTC was helpful in uniformization and improvement of the fuel properties. A significant decrease in the oxygen content and O/C ratio and improved grindability was achieved. The Weber method proved to be feasible for HTC productivity assessment for commercial installations, giving satisfactory results for most of the cases, contrary to traditional ash tracer method, which resulted in significant overestimations of the mass yield.