Comparative study on the evolution of polar compound composition of four common vegetable oils during different oxidation processes

Microwave pretreatment effects on the aroma precursors, sensory characteristics and flavor profiles of fragrant rapeseed oil

Microwave technology offers a rapid and uniform heating method. This study investigated how microwave pretreatment affects the aroma precursors and flavor of fragrant rapeseed oils (FROs). Microwave pretreatment led to decreased levels of polyunsaturated fatty acids, sugars, protein-bound amino acids, and glucosinolates. Using gas chromatography-mass spectrometry, we identified 66 volatile compounds in the oil samples. Among these, based on odor activity values (OAV ≥ 1), we found 9 aldehydes, 1 ketone, 6 pyrazines, 1 isothiocyanate, and 7 nitriles as the key aroma-active compounds, contributing fatty-like, nutty-like, and pungent-like odors, respectively. The electronic nose results highlighted W5S and W1W as primary sensors for determining the flavor profiles of FROs. Notably, aroma-active pyrazines exhibited strong negative correlations with sucrose, cysteine, lysine, and isoleucine. This research provides essential insights for enhancing the aroma of FROs.

Fish oil-loaded multicore submillimeter-sized capsules prepared with monoaxial electrospraying, chitosan-tripolyphosphate ionotropic gelation, and Tween blending

In order to load fish oil for potential encapsulation of fat-soluble functional active substances, fish oil-loaded multicore submillimeter-sized capsules were prepared with a combination method of three strategies (monoaxial electrospraying, chitosan-tripolyphosphate ionotropic gelation, and Tween blending). The chitosan-tripolyphosphate/Tween (20, 40, 60, and 80) capsules had smaller and evener fish oil cores than the chitosan-tripolyphosphate capsules, which resulted from that Tween addition induced smaller and evener fish oil droplets in the emulsions. Tween addition decreased the water contents from 56.6 % to 35.0 %-43.4 %, increased the loading capacities from 10.4 % to 12.7 %-17.2 %, and increased encapsulation efficiencies from 97.4 % to 97.8 %-99.1 %. In addition, Tween addition also decreased the highest peroxide values from 417 meq/kg oil to 173-262 meq/kg oil. These properties' changes might result from the structural differences between the chitosan-tripolyphosphate and chitosan-tripolyphosphate/Tween capsules. All the results suggested that the obtained chitosan-tripolyphosphate/Tween capsules are promising carriers for fish oil encapsulation. This work also provided useful knowledge to understand the preparation, structural, and physicochemical properties of the chitosan-tripolyphosphate capsules.

Effects of gelatin type and concentration on the preparation and properties of freeze-dried fish oil powders

The effects of gelatin type (porcine skin gelatin, PSG; bovine skin gelatin, BSG; fish gelatin, FG; or cold-water fish skin gelatin, CFG) and concentration on the preparation and properties of fish oil powders were investigated in this work. The oil powders were prepared using the combination method of gelatin-sodium hexametaphosphate complex coacervation with starch sodium octenyl succinate (SSOS)-aided freeze-drying. Compared with the other gelatins, CFG-with an unobvious isoelectric point, a lower molecular weight, more hydrogen bonds, and longer gel formation time-could not form complex coacervates, which are necessary to prepare oil powders. For oil powders obtained from the other gelatins, gelatin type and concentration did not have obvious effects on microscale morphologies; they did, however, have significant effects on physicochemical properties. The highest peroxide values of the oil powders were mainly dependent on the gelatins, expressed in the following manner: PSG (153 ± 5 - 168 ± 3 meq/Kg oil) < BSG (176 ± 5 - 188 ± 1 meq/Kg oil) < FG (196 ± 11 - 201 ± 22 meq/Kg oil). Acidic and neutral pH could not dissolve the complex coacervates. However, the oil powders could be quickly dissolved to form emulsion droplets in the gastric phase, and that SSOS increased coacervate stability and promoted oil digestion during the in vitro gastrointestinal process. In sum, this study contributes fundamental information to understanding the development of fish oil solid encapsulation preparations.

Performance and emission characteristics of a diesel engine fuelled by biodiesel from black soldier fly larvae: Effects of synthesizing catalysts with citric acid

Biodiesel has several environmental benefits, such as biodegradability, renewability and lower soot emissions. However, biodiesel has undesirable properties such as higher viscosity and density and low calorific value compared to petroleum diesel, resulting in high Brake Specific Fuel Consumption (BSFC), reduced Brake Power (BP) and increased NOX emissions creating an environmental concerns in biodiesel development. This study investigated the effects of synthesizing transesterification catalysts (CaO and NaOH) with Citric Acid (CA) on the quality of biodiesel and biodiesel blends produced from Black Soldier Fly Larvae (BSFL) (Hermetia Illucens). The quality of biodiesel and blends was determined based on fuel properties, engine performance and emission composition characteristics. The tests were performed on a single-cylinder, four-stroke, Compression Ignition (CI) diesel engine at five loads at a constant speed of 1500 rpm. The results showed that synthesizing the catalysts with CA significantly affected the fatty acid profile of the biodiesel compared to physical fuel properties. B100 (pure BSFL biodiesel) exhibited higher BSFC by 10.57-13.97 % and lower BP by 4.21-7.83 % than diesel fuel. However, the Brake Thermal Efficiency (BTE) of biodiesel was higher than that of diesel fuel by 0.82-4.34 % at maximum load. Synthesizing catalysts with CA improved the viscosity of biodiesel by 0.93-2.81 % and effectively reduced NOX, HC and Smoke opacity by 2.23-3.16 %, 4.95-5.83 % and 20.51-41.15 %, respectively.

Tween emulsifiers improved alginate-based dispersions and ionic crosslinked milli-sized capsules

The blending of surfactants might change the properties of alginate-based oil encapsulation preparations. Herein, the effects of Tween series (Tween 20, 40, 60, and 80) blending on the fish oil-encapsulated sodium alginate dispersions and calcium alginate capsules were studied. The results suggested Tween 80 showed better emulsifying properties than Span 80 for the alginate/surfactant emulsions. All the Tween series induced higher creaming stability than the sodium alginate-stabilized dispersion. Tween series blending did not change the sizes, decreased the water contents, and induced similar particle-like protrusions of calcium alginate capsules. Loading capacity and encapsulation efficiency of fish oil were dependent on the hydrophilic heads and fatty acid moieties of the Tween series. Tween series blending could increase the fish oil oxidative stability of the capsules. In the in vitro digestion process, Tween with saturated fatty acid moieties increased the free fatty acid release percentages. This work provided potential innovative processing technologies for improving the biological potency of fish oil.

Synthesized alkyl ferulates with different chain lengths inhibited the formation of lipid oxidation products in soybean oil during deep frying

The hydrophilic nature of ferulic acid limits its applications under lipophilic conditions. This study set out to evaluate the antioxidant efficacy of alkyl ferulates with different chain lengths in soybean oil under frying conditions. Ferulic acid was esterified with four unbranched fatty alcohols (C4:0-C16:0), and tert-butylhydroquinone (TBHQ) served as a standard for comparison. The antioxidant effect of alkyl ferulates increased with the alkyl chain length. The addition of antioxidants could inhibit increases in the levels of p-anisidine, total polar compounds, conjugated dienes, conjugated trienes, oxidized triglyceride monomers, triglyceride dimers, triglyceride oligomers, and glycerol core aldehydes efficiently, and the inhibitory effects of hexadecyl ferulate was the strongest. Moreover, hexadecyl ferulate and TBHQ exhibited better inhibitory effects on the generation of n-alkanals, (E)-2-alkenals, and 4-oxo-alkanals determined by ¹H nuclear magnetic resonance than others. Hence, the long-chain alkyl ferulates meet the industrial demands for ideal antioxidants with strong antioxidant capacity at high temperatures.

Influence of cooking techniques on food quality, digestibility, and health risks regarding lipid oxidation

Foods undergo various physical and chemical reactions during cooking. Boiling, steaming, baking, smoking and frying are common traditional cooking techniques. At present, new cooking technologies including ultrasonic-assisted cooking, vacuum low-temperature cooking, vacuum frying, microwave heating, infrared heating, ohmic heating and air frying are widely studied and used. In cooking, lipid oxidation is the main reason for the change in lipid quality. Oxidative decomposition, triglyceride monomer oxidation, hydrolysis, isomerization, cyclization reaction and polymerization occurred in lipid oxidation affect lipids' quality, flavor, digestibility and safety. Meanwhile, lipid oxidation in cooking might cause the decline of lipid digestibility and increase of health risks. Compared with the traditional cooking technology, the new cooking technology that is milder, more uniform and faster can reduce the loss of lipid nutrition and produce a better flavor. In the future, the combination of various cooking technologies is an effective strategy for families to obtain healthier food.

Effects of Span surfactants on the preparation and properties of fish oil-loaded sodium alginate-stabilized emulsions and calcium alginate-stabilized capsules

Encapsulation is an efficient protection method for oil in both liquid (e.g., emulsion) and solid (e.g., capsule) forms. In this work, we mainly explored the effect of different Span surfactants (Span 20, Span 40, Span 60, and Span 80) on the properties of fish oil-loaded sodium alginate/Span-stabilized emulsions and calcium alginate/Span capsules. For emulsions, different Span surfactants induced different initial droplet sizes and emulsion creaming stability. The emulsifying stability of Span surfactants for sodium alginate/Span-stabilized emulsions was: Span 40 < Span 20 < Span 80 < Span 60. For capsules, a Span addition could decrease the water content and change the particle morphologies. Compared with the calcium alginate capsule (12.2 %), the Span 60 addition increased the fish oil loading ratio (20.2 %). Moreover, the addition of Span 20, Span 60, and Span 80 decreased the production of primary lipid hydroperoxides of the capsules. Span surfactants had different effects on the free fatty acid release of calcium alginate capsules in the gastrointestinal digestion process, such that: Span 40 > Span 80 > control > Span 20 > Span 60. This work suggests that Span surfactants are capable of adjusting and optimizing the properties of emulsions and capsules for potential food applications.

Utilization of Diaphragma juglandis extract as a natural antioxidant for improving the oxidative stability of soybean oil during deep frying

•

Stabilization of oils during deep-frying by Diaphragma juglandis extract was studied.

•

A total of 31 polyphenols were determined in Diaphragma juglandis extract.

•

The extract is proven to inhibit the deterioration of triglycerides during frying.

•

Extract-added frying oils exhibit a lesser increase in aldehydes and alcohols.

Lipid oxidation significantly shortens the life of frying oils, and this challenge can be addressed by using antioxidants. This work aimed to investigate the effect of Diaphragma juglandis extract (DJE) on the oxidative stability of soybean oil during deep frying. Tert-butylhydroquinone (TBHQ) and tea polyphenol (TP) were applied as positive controls. A total of 31 polyphenols were determined in DJE, and catechin, quercitrin, taxifolin, quercetin 3-β-d-glucoside, epicatechin, gallic acid, and 3,4-dihydroxybenzoic acid were the main components. The antioxidants effectively delayed the degradation of triglycerides and inhibited the increase in the contents of p-anisidine, oxidized triglyceride monomers, triglyceride dimers, and triglyceride oligomers, with DJE exhibiting better performance. Moreover, DJE showed better inhibitory effect on the formation of (E)-2-alkenals, (E,E)-2,4-alkadienals, 4-oxo-alkanals, primary alcohols, and secondary alcohols detected by ¹H nuclear magnetic resonance than TBHQ and TP. Therefore, DJE has great potential as an excellent antioxidant in large-scale industrial applications.

Mechanism, indexes, methods, challenges, and perspectives of edible oil oxidation analysis

Edible oils are indispensable food components, because they are used for cooking or frying. However, during processing, transport, storage, and consumption, edible oils are susceptible to oxidation, during which various primary and secondary oxidative products are generated. These products may reduce the nutritional value and safety of edible oils and even harm human health. Therefore, analyzing the oxidation of edible oil is essential to ensure the quality and safety of oil. Oxidation is a complex process with various oxidative products, and the content of these products can be evaluated by corresponding indexes. According to the structure and properties of the oxidative products, analytical methods have been employed to quantify these products to analyze the oxidation of oil. Combined with proper chemometric analytical methods, qualitative identification has been performed to discriminate oxidized and nonoxidized oils. Oxidative products are complex and diverse. Thus, proper indexes and analytical methods should be selected depending on specific research objectives. Expanding the mechanism of the correspondence between oxidative products and analytical methods is crucial. The underlying mechanism, conventional indexes, and applications of analytical methods are summarized in this review. The challenges and perspectives for future applications of several methods in determining oxidation are also discussed. This review may serve as a reference in the selection, establishment, and improvement of methods for analyzing the oxidation of edible oil. HighlightsThe mechanism of edible oil oxidation analysis was elaborated.Conventional oxidation indexes and their limited values were discussed.Analytical methods for the determination of oxidative products and qualitative identification of oxidized and non-oxidized oils were reviewed.

Simultaneous determination of short-chain fatty alcohols in aged oil and biodiesels by stable isotope labeling assisted liquid chromatography-mass spectrometry

Short-chain fatty alcohols (SCFAs) are one of the reactants for the production of biodiesels. The SCFA residues at the trace level have a significant impact on biodiesel quality. However, the analysis of SCFAs in aged biodiesels has not been reported so far, which is probably due to the unavailability of an appropriate analytical method for the simultaneous determination of SCFAs. Herein, we developed a novel analytical approach with high sensitivity and selectivity for the simultaneous identification and determination of SCFAs in seed oil and biodiesel samples during the simulated real-time aging by stable isotope labeling assisted liquid chromatography-mass spectrometry (SIL-LC-MS). A pair of isotope labeling reagents, pyridine (Py) and [²H₅]pyridine ([²H₅]Py), were used to label SCFAs in biodiesels and standards, respectively. The [²H₅]Py labeled SCFAs were used as internal standards to compensate for the detection of variances. The simultaneous determination of SCFAs was performed by LC-MS with an improved detection selectivity and sensitivity. The limits of detection (LODs) values were ranged from 0.2 to 0.5 ng mL^-1 for the investigated SCFAs. Good linearity was observed in the studied ranges (R² > 0.99) and good precision with relative standard deviations (RSDs) was in the range of 4.9-18.1%. Average recoveries were obtained in the range of 80.3%-115.4%. The matrix effects were in the range of 70.0-104.3%. The validated SIL-LC-MS method was applied to the simultaneous quantitative analysis of SCFAs in seed oil and biodiesel samples and the LC-MS analysis could be done within 3 min. The formation mechanism of SCFAs in aged oil and biodiesel samples was also investigated by this method. The results suggest that SCFAs were formed and their composition changed during the simulated real-time aging of long-chain fatty acid (LCFA), long-chain fatty acid methyl ester (FAME), seed oil, and biodiesels. Moreover, we found that the formation of 1-pentanol and 1-hexanol was associated with the number and position of double bonds in LCFAs and FAMEs.

The formation, determination and health implications of polar compounds in edible oils: Current status, challenges and perspectives

To effectively control the quality of edible oil, polar compounds in edible oils have been studied extensively in the past few decades, particularly in the field of frying. This article critically reviews the formation, determination, and health implications of the polar compounds in edible oils via comprehensive literature research. The challenges and perspectives of polar compounds in edible oils are also discussed. Three chemical reactions, including oxidation, hydrolysis, and polymerization, elaborate polar compound formation. Many techniques are used to determine the total polar compound content of edible oils, with comparative analysis; Fourier transform infrared technique is a relatively ideal method. A major obstacle for nutritional studies focused on polar compounds formed during frying is that few pure compounds have been quantified. To inhibit the formation of the polar compounds effectively, investigations into the applications of enzymatic method in developing new lipophilized antioxidants may be a new direction in research.

Effect of oil surface activity on oil absorption behavior of potato strips during frying process

Oil absorption behavior of fried foods is affected by oil property during frying process. The present study investigated the effect of oil viscosity and surface activity on the oil uptake of fried potato strips with frying temperature. Results showed that oil content of palm oil (PO) and soybean oil (SBO) in fried strips increased with the frying temperature between 140 °C and 180 °C, while deceased at 200 °C. Oil distribution determined by LF-NMR and CLSM confirmed the changes of oil content of fried potato strips. Interfacial tension and surfactant content (monoglycerides, diglycerides, total polar compounds) of PO and SBO increased with frying temperature and affected the oil absorption of fried strips. Frying temperature and oil type showed no effect on surface tension. Besides, the higher level of viscosity, interfacial tension and surfactants of SBO than those of PO facilitated the more SO and TO of fried potato strips.