Preparation of porous starch by α-amylase-catalyzed hydrolysis under a moderate electric field

Improving physicochemical and nutritional attributes of rice starch through green modification techniques

Rice, has long been an inseparable part of the human diet all over the world. As one of the most rapidly growing crops, rice has played a key role in securing the food chain of low-income food-deficit countries. Starch is the main component in rice granules which other than its nutritional essence, plays a key role in defining the physicochemical attributes of rice-based products. However, rice starch suffers from weak techno-functional characteristics (e.g., retrogradability of pastes, opacity of gels, and low shear/temperature resistibility. Green modification techniques (i.e. Non-thermal methods, Novel thermal (e.g., microwave, and ohmic heating) and enzymatic approaches) were shown to be potent tools in modifying rice starch characteristics without the exertion of unfavorable chemical reagents. This study corroborated the potential of green techniques for rice starch modification and provided deep insight for their further application instead of unsafe chemical methods.

Improving resistant starch content of cassava starch by pulsed electric field-assisted esterification

This study aims to investigate the effect of pulsed electric field (PEF) assisted OSA esterification treatment on the multi-scale structure and digestive properties of cassava starch and structure-digestion relationships. The degree of substitution (DS) of starch dually modified at 1.5-4.5 kV/cm was 37.6-55.3 % higher than that of starch modified by the conventional method. Compared with native starch, the resistant starch (RS) content of esterified starch treated with 3 kV/cm significantly increased by 17.13 %, whereas that of starch produced by the conventional method increased by only 5.91 %. Furthermore, assisted esterification at low electric fields (1.5-3 kV/cm) promotes ester carbonyl grafting on the surface of starch granules, increases steric hindrance and promotes the rearrangement of the amorphous regions of starch, which increases the density of the double-helical structure. These structural changes slow down starch digestion and increase the RS content. Therefore, this study presents a potential method for increasing the RS content of starch products using PEF to achieve the desired digestibility.

Formation, influencing factors, and applications of internal channels in starch: A review

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

Enhancement of the carboxymethylation of corn starch via induced electric field

This study aimed to enhance the synthesis of carboxymethyl starch (CMS) by induced electric field (IEF). Corn starch was alkalized, pumped into IEF system, and then reacted with monochloroacetic acid at excitation voltages of 0-400 V. IEF enhanced the carboxymethylation by accelerating the rate of OH- and ClCH2COO- attacking starch particles and slightly intensifying the thermal effect by ~7.1 °C (30 min). Compared with the control (0 V), IEF increased the degree of substitution and reaction efficiency by 0.056-0.148 and 9.37-24.56 %, caused more destruction in starch granular and crystal structure, and thus increased its water solubility, swelling power, and paste transparency. Furthermore, some new crystals were formed during IEF treatment, which enhanced the thermostability of CMS, showing an increase of the maximum decomposition temperature by 16-26 °C. Overall, the results classified that IEF could improve the carboxymethylation and enhance the thermostability of products, which provided guides for the applications of electro-techniques in starch modification involving charged species.

Development of polydopamine functionalized porous starch for bleeding control with the assistance of NIR light

Efficient hemorrhage control of severe wound injuries is an urgent medical need, deserving agents with promising blood coagulation and biocompatible characteristics. Current work developed polydopamine (PDA) functionalized porous starch powder (PS-PDA) for emergency bleeding treatment. The micro-morphology and elements, chemical groups, and porosity of PS-PDA were systematically characterized. Its comparison with porous starch (PS) revealed the promising potential of this composite in medical practice. On one hand, PS-PDA showed superior surface area and biomineralization affinity over PS, along with comparable hemo/cyto-compatibility. On the other hand, the photothermal effect of PDA under near Infrared (NIR) light paved the possibility to accelerate blood coagulation in situ. In vivo studies indicated PS-PDA can significantly reduce blood loss and improvement of hemostasis efficiency accompanied by NIR light exposure. These results suggest that this newly developed PS-PDA powder can serve as a promising hemostatic material for bleeding wound control.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Green preparation of 3D micronetwork eugenol-encapsuled porous starch for improving the performance of starch-based antibacterial film

In order to find a non-enzymatically treated alternative wall material with effective encapsulation properties, and to reduce the use of conventional non-biodegradable plastics, a novel 3D-micronetwork porous starch (3D-MPS) was created via a modified sacrificial template method to encapsulate eugenol (3D-EMPS) and used to incorporate with TiO₂-starch film, for significantly improving the performance of starch-based antibacterial film. At the template SiO₂ nanoparticles concentration of 0.1 %, the 3D-MPS exhibited anticipated alveolate structure with internal aperture of approximately 10 μm confirmed by SEM. With addition of 3D-EMPS, higher tensile strength (29.70 Mpa) and water barrier property (924 g/cm²·24 h) of the composite film was obtained. Moreover, molecular docking technique was used to model the intermolecular forces, which showed that the major forces maintaining the internal bonding of the composite film were hydrogen bonding and the interaction between eugenol and 3D-MPS skeleton in 3D-EMPS. Meanwhile, the composite film demonstrated the expected eugenol retardation and antimicrobial capacity against S. aureus, E. coli, and B. subtilis. Finally, the composite films were used for evaluating the feasibility in the actual food, which largely extended its shelf life compared to the negative control. This high-performance film revealed their potential for packaging materials application.

Effects of high-speed shear and double-enzymatic hydrolysis on the structural and physicochemical properties of rice porous starch

This study aimed to investigate the physicochemical properties of the rice porous starch (HSS-ES) prepared by high-speed shear combined with double-enzymatic (α-amylase and glucoamylase) hydrolysis, and to reveal their mechanism. The analyses of ¹H NMR and amylose content showed that high-speed shear changed the molecular structure of starch and increased the amylose content (up to 20.42 ± 0.04 %). FTIR, XRD and SAXS spectra indicated that high-speed shear did not change the starch crystal configuration but caused a decrease in short-range molecular order and relative crystallinity (24.42 ± 0.06 %), and a loose semi-crystalline lamellar, which were beneficial to the followed double-enzymatic hydrolysis. Therefore, the HSS-ES displayed a superior porous structure and larger specific surface area (2.962 ± 0.002 m²/g) compared with double-enzymatic hydrolyzed porous starch (ES), resulting in the increase of water and oil absorption from 130.79 ± 0.50 % and 109.63 ± 0.71 % to 154.79 ± 1.14 % and 138.40 ± 1.18 %, respectively. In vitro digestion analysis showed that the HSS-ES had good digestive resistance derived from the higher content of slowly digestible and resistant starch. The present study suggested that high-speed shear as an enzymatic hydrolysis pretreatment significantly enhanced the pore formation of rice starch.

Porous corn starch obtained from combined cold plasma and enzymatic hydrolysis: Microstructure and physicochemical properties

The combined effect of cold plasma treatment and enzymatic hydrolysis was investigated on the physicochemical and microstructural properties of porous corn starch. Scanning electron microscopy (SEM) images depicted that the combined treatment led to the creation of deeper pores on the surface of starch granules. The combined treatment indicated the highest swelling power (19.49 g/g), solubility (10.08 %), specific surface area (2.97 m²/g) and total pore volume (10.47 cm³/g). According to the X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), the combined treatment, compared with the enzymatic hydrolysis, decreased the starch crystallinity, the order of the double-helix structure, and the starch gelatinization enthalpy. The rapid visco analyzer (RVA) pasting profile revealed that the combined treatment elevated the breakdown and setback viscosities. This study indicated that cold plasma pretreatment, as a green non-thermal technology, facilitated the performance of enzymes, resulting in the production of a porous starch with a higher absorption capacity.

Effect of pre-gelatinization on α-amylase-catalyzed hydrolysis of corn starch under moderate electric field

This study aimed to explore the roles of starch structure in α-amylase-catalyzed hydrolysis under moderate electric field (MEF). Corn starch was gelatinized by controlling the temperature procedure of rapid viscos-analysis, and then the pre-gelatinized starch (3.0 g) was treated by MEF (2.5 and 5 V/cm) in the presence of α-amylase (1.5 mL). Only a slight hydrolysis occurred for native starch, showing minor increases in reducing sugar content (RSC, ∼0.19 mg/mL), slight changes in granular and semicrystalline structure, and decreases in thermostability (the maximum decomposition temperature (T_max) decreased from 322 to 300 °C). The densely-packed semicrystalline within starch granules was destroyed by pre-gelatinization, thus enhancing the hydrolysis and further decreasing the thermostability, presenting RSC values of 0.63-0.92 mg/mL and T_max of 291-292 °C. Moreover, some special crystals were formed by IEF-induced orientation of hydrolyzed starch chains. Overall, these results confirmed that the semicrystalline structure of starch dominated in MEF-assisted hydrolysis, which could provide guidance for the application of electro-based techniques in starch modification.

Effects of connection mode on acid hydrolysis of corn starch during induced electric field treatment

This study aimed to explore the effect of induced electric field (IEF) treatment on acid hydrolysis of corn starch by altering the connection modes of sample coils of a 4-reactor IEF system. Results suggested that IEF treatment could enhance the hydrolysis of corn starch and series connection (1. RRRR, η=16ESi2Pin4ZSi+Zload) exhibited higher energy efficiency than parallel (9. (RRRR), η=4ESi2PinZSi+4Zload), thus contributing to more extensive hydrolysis. Although no new functional group was formed, the starch granules were partially cracked into pieces and the crystallinity was slightly increased after IEF-assisted hydrolysis. Differential scanning calorimetry results indicated that IEF-assisted hydrolysis increased the gelatinization temperatures but decreased the enthalpy of starch, with a greatest variation was observed by series connection. Rapid visco-analysis showed that IEF-assisted hydrolysis greatly decreased the pasting viscosity of corn starch and also series connection showed the strongest reduction. The obtained results could provide a theoretical guide for the applications of IEF technology in biomaterial processing.

Novel active starch films incorporating tea polyphenols-loaded porous starch as food packaging materials

A novel active food packaging film was developed by casting a corn starch/tea polyphenol (TP)-loaded porous starch (PS, obtained by enzymatic hydrolysis) film forming solution, with the latter helping to regulate the slow release of TP. Results showed that PS had a favorable TP adsorption capacity, and the casted films had a homogeneous distribution of the formulation components. Likewise, the active films had good mechanical properties, UV barrier properties, thermal stability, and excellent antioxidant properties. The slow release of TP from the films was sustained, which is a desired characteristic for extending the protection afforded by the active film to the food under consideration.