Palm-based fat crystallized at different temperatures with and without high-intensity ultrasound in batch and in a scraped surface heat exchanger

Regulation of fat crystals in water-in-oil emulsions by high-intensity ultrasound: Crystal size and tracing of droplet distribution

In this paper, two emulsion systems with high and low solid fat contents were prepared from 20 % water phase and 80 % oil phase by adjusting the palm oil/palm stearin/soybean oil ratio. Different ultrasonic power and time were used for the pretreatment of emulsion with different solid fat content, and the application characteristics of ultrasonic in W/O emulsions were explored and evaluated. Directly using high-intensity ultrasound to prepare fatty emulsions would weaken the hardness and storage modulus G' of the samples. Although ultrasound reduced the size of fat crystals in emulsions, the interaction between water droplets and fat crystals needs to be considered. After ultrasonic treatment, water droplets were difficult to immobilize on the crystal surface and thus acted as an active filler to stabilize the emulsion together with the fat crystal network. In high solid fat emulsion systems, an increase in ultrasound power (from 100 W to 200 W) could more affect the crystallization behavior of fats than an increase in ultrasound duration (from 30 s to 60 s), and the distribution of crystals and droplets was more uniform. In the low solid fat emulsion system, the texture of the sample after ultrasonic treatment was softer, and the surface was more delicate and smoother. However, the higher ultrasonic intensity (200 W) was not conducive to the preparation of the spread. Although the ultrasound with excessive intensity promoted the formation of small crystals, it would also lead to the aggregation of small crystals. These small crystals cannot form a uniform crystal network, which increases the fluidity of emulsions.

Recent Advances in Lipid Crystallization in the Food Industry

This review discusses fundamental concepts of fat crystallization and how various processing conditions such as crystallization temperature, cooling rate, and shear or agitation affect this process. Traditional methods used to process fats, such as the use of scraped surface heat exchangers, fractionation, and interesterification, are described. Parameters that affect fat crystallization in these systems, such as shear, crystallization temperature, type of fat, and type of process, are discussed. In addition, the use of minor components to induce or delay fat crystallization based on their chemical composition is presented. The use of novel technologies, such as high-intensity ultrasound, oleogelation, and high-pressure crystallization is also reviewed. In these cases, acoustic and high-pressure process parameters, the various types of oleogels, and the use of oleogelators of differing chemical compositions are discussed. The combination of all these techniques and future trends is also presented.

Nonconventional Technologies in Lipid Modifications

Lipid modifications play a crucial role in various fields, including food science, pharmaceuticals, and biofuel production. Traditional methods for lipid modifications involve physical and chemical approaches or enzymatic reactions, which often have limitations in terms of specificity, efficiency, and environmental impact. In recent years, nonconventional technologies have emerged as promising alternatives for lipid modifications. This review provides a comprehensive overview of nonconventional technologies for lipid modifications, including high-pressure processing, pulsed electric fields, ultrasound, ozonation, and cold plasma technology. The principles,mechanisms, and advantages of these technologies are discussed, along with their applications in lipid modification processes. Additionally, the challenges and future perspectives of nonconventional technologies in lipid modifications are addressed, highlighting the potential and challenges for further advancements in this field. The integration of nonconventional technologies with traditional methods has the potential to revolutionize lipid modifications, enabling the development of novel lipid-based products with enhanced functional properties and improved sustainability profiles.

Sonoprocessing: mechanisms and recent applications of power ultrasound in food

There is a growing interest in using green technologies in the food industry. As a green processing technique, ultrasound has a great potential to be applied in many food applications. In this review, the basic mechanism of ultrasound processing technology has been discussed. Then, ultrasound technology was reviewed from the application of assisted food processing methods, such as assisted gelation, assisted freezing and thawing, assisted crystallization, and other assisted applications. Moreover, ultrasound was reviewed from the aspect of structure and property modification technology, such as modification of polysaccharides and fats. Furthermore, ultrasound was reviewed to facilitate beneficial food reactions, such as glycosylation, enzymatic cross-linking, protein hydrolyzation, fermentation, and marination. After that, ultrasound applications in the food safety sector were reviewed from the aspect of the inactivation of microbes, degradation of pesticides, and toxins, as well inactivation of some enzymes. Finally, the applications of ultrasound technology in food waste disposal and environmental protection were reviewed. Thus, some sonoprocessing technologies can be recommended for the use in the food industry on a large scale. However, there is still a need for funding research and development projects to develop more efficient ultrasound devices.

Crystallization of lipids and lipid emulsions treated by power ultrasound: A review

The actual food system with fat is always complex and fat crystal and fat crystal networks have important effects on the physical properties of food. Recently, power ultrasound (PU) had been widely recognized as an auxiliary technology of fat crystallization to modify food properties. This review expounded on the mechanism of ultrasonic crystallization, and summarized effects of various factors in the process of ultrasonic treatment on fat crystallization. Based on the above, combined with the application of ultrasound in emulsions, the ultrasonic fat crystallization effect in the emulsion system was judged and described. Research results indicated that PU could shorten the induction time of crystallization, accelerate the formation of crystal nuclei, and change the polymorphism of fat crystals. The product treated by PU formed smaller and more uniform crystals to produce a more viscoelastic fat crystal network. In emulsion systems, ultrasonic treatments showed the same effect, but the effect of ultrasonic crystallization on the emulsion stability was different due to fat crystals in different emulsion systems. Meanwhile, the importance of ultrasonic crystallization in lipid emulsions was emphasized, thus ultrasonic crystallization had great potential in emulsion systems.

Influence of sonication, temperature, and agitation, on the physical properties of a palm-based fat crystallized in a continuous system

High-intensity ultrasound (HIU) has been used in the past to change fat crystallization and physical properties of fat crystalline networks. The objective of this work was to evaluate how HIU placed on different positions in a scraped surface heat exchanger (SSHE) using different processing conditions affect the physical properties of an interesterified palm olein. The sample was crystallized at two temperatures (20 °C and 25 °C) and two agitation rates (344/208 rpm and 185/71 rpm, barrels/pin worker). HIU (12.7 mm-diameter tip, 50% amplitude, 5 s pulses) was placed at three different positions within the SSHE. After processing, samples were stored at 25 °C for 48 h and analyzed according to the crystal morphology, solid fat content (SFC), oil binding capacity (OBC), melting behavior, viscoelasticity, and hardness. Physical properties were affected by crystallization conditions, by sonication, and by HIU position. The greatest improvement obtained was at 20 °C using low agitation when HIU was placed at the beginning of the SSHE. These conditions result in a sample with 98.9% of OBC, 274 kPa of viscoelasticity and 31 N of hardness. These results show that HIU can be used as an additional processing tool to improve physical properties of a palm-based fat and that the best improvement was obtained as a combination of crystallization conditions and HIU position.