Effect of debranching on the structure and digestibility of octenyl succinic anhydride starch nanoparticles

Thiolated dextrin nanoparticles for curcumin delivery: Stability, in vitro release, and binding mechanism

To achieve the effective loading and delivery of curcumin, novel disulfide-crosslinked nanoparticles based on modified dextrin were developed for the encapsulation of curcumin. Thiolated dextrin (Dt-SH) was obtained via sodium periodate oxidation and cysteamine grafting. The Dt-SH exhibited a rough, flake-like morphology, was classified as an amorphous material and demonstrated enhanced enzyme resistance. Subsequently, spherical nanoparticles with sizes ranging from 92.52 to 157.12 nm and zeta potentials between +23.59 and + 29.90 mV were self-assembled in an aqueous solution. Thiol modification promoted interconnection and aggregation of the nanoparticles. These nanoparticles exhibited pH-dependent size variations. Taking curcumin as a hydrophobic model, nanoparticles showed intestinal targeted release in vitro. Fluorescence spectroscopy and thermodynamic analysis indicated that curcumin bound to Dt-SH nanoparticles primarily through hydrogen bonding and van der Waals forces, with hydrophobic interactions contributing. These findings supported the potential of thiolated dextrin nanoparticles in the effective delivery of hydrophobic compounds.

Development of an amorphous octenyl succinate anhydride starch-based emulsion to improve the stability and bioaccessibility of phloretin

Phloretin (PHT) is a natural functional compound with antioxidant properties. However, its poor water solubility and high sensitivity to extreme pH environments, oxygen, and high temperatures limit its absorption and stability. Therefore, in this study, amorphous octenyl succinic anhydride starch (AOS) was employed to enhance the stability of PHT-loaded emulsions, and characteristics of these emulsions were evaluated. In total, three AOS samples with varying degrees of amorphous were prepared as emulsifiers. Notably, amorphous starch prepared at 90 °C was found to stabilize the emulsion by forming a superior gel network structure, facilitating the efficient loading of PHT and protecting this compound from degradation in extreme environments. Finally, in vitro digestion and release experiments confirmed the effectiveness of these emulsions in PHT delivery. Compared to the existing β-cyclodextrin-PHT drug delivery system, the prepared emulsion exhibited superior PHT release at the site of intestinal absorption. Therefore, the emulsions established in this study show promise as PHT delivery systems for future applications in the food industry.

Effect of the degree of substitution on water solubility of OSA-debranched starch and its potential use as a 1-Octacosanol carrier

1-Octacosanol(1-Octa) has anti-fatigue, anti-Parkinson's disease, and lipid-regulating effects; however, its long hydrophobic carbon chain results in very poor water solubility, which in turn leads to malabsorption and low bioavailability. To improve the solubility of 1-Octa, it was embedded in octenyl succinic acid and debranched complex-modified starch (OSD) to obtain aqueous OSD-Octa complexes. The solubility of OSD has been found to increase significantly, from 23.40 g/100 g to 94.24 g/100 g, as the degree of substitution increased. Critical micelle concentration determinations and iodine-staining indices indicated that OSD can potentially serve as a carrier for delivering hydrophobic functional factors. The encapsulation efficiency of 79.15 ± 0.02 % and the loading capacity of 44.66 ± 0.49 μg/mg were found with OSD-Octa complexes. Fluorescent 1-Octa particles inside starch were captured clearly. The solubility of 1-Octa in water was 1.532 ± 0.023 mg/mL after encapsulation. These results demonstrate the potential of OSD as a 1-Octa carrier that significantly improves its water solubility.

Unveiling the synergistic effect of octenyl succinic anhydride and pulsed electric field on starch nanoparticles

In this study, guinea starch nanoparticles (GSNP) were prepared by nanoprecipitation technique and modified with octenyl succinic anhydride (3 %) and pulsed electric field (1.5, 3.0, and 4.5 kV/cm). The effect of dual modification on the physicochemical, structural, morphological, thermo-pasting, and rheological properties of GSNP was investigated. The dual modification successfully incorporated octenyl groups into GSNP, as confirmed by 1H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. The degree of substitution increased from 0.0254 to 0.0347, with particle size ranging from 241.30 to 292.50 nm and zeta potential of -23.11 to -29.98 mV. TEM micrographs revealed that all SNP samples had self-aggregated granules with a mean size below 120 nm, and XRD confirmed a V-type crystalline structure. The amylose content and water absorption capacity decreased from 34.02 % to 24.63 % and from 2.45 to 1.91 g/g, respectively, while the oil absorption capacity and relative crystallinity increased from 3.42 to 4.01 g/g and from 17.82 % to 34.76 %, with modification. The gelatinization and degradation temperature of modified samples were higher while pasting properties exhibited variation with modification. The rheological properties of modified SNP samples exhibited more pronounced shear thinning, attributed to their weaker gel structure and fluid-like gel network. Overall, results suggested that modified GSNPs have potential for stabilizing Pickering emulsion and delivery of carrier materials for active functional substances.

Improved light and ultraviolet stability of curcumin encapsulated in emulsion gels prepared with corn starch, OSA-starch and whey protein isolate

The objective of this study was to enhance the bioavailability and stability of curcumin (Cur) by encapsulating it in corn starch (CS)/octenylsuccinic acid modified (OSA)-starch-whey protein isolate (WPI) emulsion gels (EGs). As the volume fraction of the oil phase increased, the droplet size and ζ- potential of the EGs decreased. The encapsulation efficiency and bioavailability of Cur in CS/OSA-starch-WPI EGs with a 60% oil ratio were 96.0% and 67.3%, respectively. The release rate of free fatty acid and the bioavailability of Cur from the EGs after digestion were significantly higher compared to Cur dissolved in oil. EGs with an oil phase volume fraction of 75% and 80% demonstrated greater protection against light irradiation but were less effective against UV irradiation compared to EGs with a 60% oil phase volume fraction. Encapsulation in EGs proved to be an effective method for enhancing the bioavailability and stability of Cur.

Impact of starch chain length distributions on physicochemical properties and digestibility of starches

Changing starch structure at different levels is a promising approach to promote desirable metabolic responses. Chain length distribution (CLD) is among the starch structural characteristics having a potential to determine properties of starch-based products. Therefore, the objective of the current review is to summarize recent findings on CLD and its impact on physicochemical properties and digestion. Investigations undertaken to enhance understanding of starch structure have shown clearly that CLD is a significant determining factor in modulating starch digestibility. Enzymatic modifications and processing treatments alter the CLD of starch, which in turn affects the rate of digestion, but the underlying molecular mechanisms have yet to be fully elucidated. Even though advances have been made in manipulating CLD using different methods and to correlate the changes with various functional properties, in general the area needs further investigations to open new awareness for enhancing healthiness of starchy foods.

Structure and surface properties of ozone-conjugated octenyl succinic anhydride modified waxy rice starch: Towards high-stable Pickering emulsion

In the present work, a dual-modified waxy rice starch (OOWRS) fabricated with OSA and ozone was successfully used to stabilize the O/W Pickering emulsion. The molecular structure, surface properties, and underlying stabilizing mechanism were systematically investigated. The results showed that oxidation occurring on the surface of OSA-modified waxy rice starch (OSAWRS) resulted in the presence of indentations and cracks. The relative crystallinity of starch was generally decreased with increasing degree of oxidation. Due to the introduction of carbonyl and the variation in surface structure, the hydrophobicity and acidity of OSAWRS were significantly enhanced after the ozone treatment. Remarkably, OOWRS stabilized Pickering emulsion exhibited a feature of typical O/W emulsion, and the 0.5 h and 1 h OOWRS emulsion exhibited a more uniform droplet size as well as a higher surface potential. We also noted that a weak-gel network was formed within the OOWRS emulsion system as the hydrophilic starch chains played a bridging role. Two reasons for the improved stability of the emulsion were the special gel structure and the enhanced electrical repulsion among the droplets. This research provides that ozone-conjugated OSA modification is a promising strategy for improving the emulsion ability of starch-based Pickering emulsions.

Effects of annealing temperature and time on the structural and physicochemical properties of sweet potato flour hydrogels

The physicochemical properties of sweet potato flour (SPF) can be modified by annealing. Native SPF was annealed in deionized water at a flour-to-water ratio of 1:3 (w/v) and temperatures of 50, 55, 60, or 65 °C for either 12 or 24 h. Annealed SPF maintained the A-type crystalline region and displayed increased relative crystallinity, increased pasting temperature, and decreased breakdown. SPF gels showed enhanced hardness together with better springiness when SPF was annealed at low temperature/long time or high temperature/short time. Annealed SPF hydrogel sheets contained larger, more uniform, and smoother pores than native ones. Noticeably, hydrogel sheets made of SPF annealed at 50 °C for 24 h exhibited advanced fracture strain from 93% to 176%. Overall, this work showed that annealing could modulate the characteristics of SPR hydrogels, which may widen the extent of applications in food industries. However, the annealing conditions need to be optimized.

Application of Pickering emulsions stabilized by corn, potato and pea starch nanoparticles: Effect of environmental conditions and approach for curcumin release

To apply octenyl succinic anhydride (OSA)-modified corn, potato and pea starch nanoparticles (OCSNPs, OPtSNPs and OPSNPs, respectively) as Pickering emulsion stabilizers, effect of environmental conditions such as 30 days of storage period, pH of 1-11, ionic strength of 0.1-0.9 mol/L and heat of 30-90 °C on the stability of the emulsions was evaluated. Compared with emulsions stabilized by starch nanoparticles (SNPs), the emulsions stabilized by OSA-modified SNPs (OSNPs) kept stable against different environmental stresses (pH, ionic strength and heat) as well as for a storage period of 30 days, especially for OPtSNPs. Additionally, oiling-off was not observed in OSNPs emulsions over the storage time. OSNPs emulsions also showed improved protection on curcumin during storage and controlled release during in vitro digestion. These findings enlarged the application of OCSNPs, OPtSNPs and OPSNPs stabilized-Pickering emulsion in food systems and deliver system.

Sonochemical effect on the degree of substitution of octenyl-succinic anhydride into waxy rice starch nanoparticles and study of gastro-intestinal hydrolysis using INFOGEST in vitro digestion method

Octenyl succinylation of starch nanoparticles has been proven to be effective in a variety of food industry applications such as fat replacement, thickening agents, emulsion formation, and delivery of bioactive compounds. In this study, waxy rice starch was debranched with pullulanase to obtain short glucans, which were then modified with octenyl succinic anhydride (OSA) to obtain amphiphilic short glucans (ASG) using high (400 W) and low (200 W) ultrasonic power intensity at 30 and 60 cycles. Developed ASG were characterized by nanoparticle size (ca. < 50 nm), surface hydrophobicity and gastro-intestinal stability. Ultrasonic intervention progressively increased the degree of substitution (DS) of OSA into hydrolysed starch. A significant molecular exchange between starch and OSA was confirmed with shoulder peak at 1.07 ppm by ¹H NMR, and 1560 and 1727 cm^-1 peaks in FTIR spectral image, and broad band at 1260 cm^-1 by Raman spectroscopy. The XRD analysis confirmed the change in crystalline structure, and the emergence of new peaks at 2θ angles of around 5.81° which represent the development of B-type structure following pullulanasehydrolysis, and minor peaks at 13.92° and 19.83°, which imply the production of V_h type structures in ASG. Gastro-intestinal hydrolysis of starch after modification was analyzed in a sequential digestion process using INFOGEST method. The gastro-kinetic studies unveiled the reduction in the digestibility constant in the oral-gastric phase, with significantly enhanced value of kinetic constants in the intestinal phase, proving a sustained gastro-intestinal stability. The OSA-modified starches with greater DS havemore rigid and compact surface structure, which provides superior protection against biochemical conditions in the stomach fluid.

Study of Changes in Crystallinity and Functional Properties of Modified Sago Starch (Metroxylon sp.) Using Physical and Chemical Treatment

Sago starch has weaknesses such as low thermal stability and high syneresis. Modifications were made to improve the characteristics of native sago starch. In this study, sago starch was modified by autoclave-heating treatment (AHT), osmotic-pressure treatment (OPT), octenyl-succinic anhydride modification (OSA), and citric acid cross-linking (CA). This study aimed to examine the changes in chemical composition, crystallinity, and functional properties of the native sago starch after physical and chemical modifications. The results show that physical modification caused greater granule damage than chemical modification. All modification treatments did not alter the type of crystallinity but decreased the relative crystallinity of native starch. New functional groups were formed in chemically modified starches at a wavelength of 1700-1725 cm-1. The degree of order (DO) and degree of double helix (DD) of the modified starches were also not significantly different from the native sample, except for AHT and OPT, respectively. Physical modification decreased the swelling volume, while chemical modification increased its value and is inversely proportional to solubility. AHT and OPT starches have the best freeze-thaw stability among others, indicating that both starches have the potential to be applied in frozen food.

Octenyl Succinic Anhydride-Modified Starch Attenuates Body Weight Gain and Changes Intestinal Environment of High-Fat Diet-Fed Mice

Effects of octenylsuccinate (OS) starch on body composition and intestinal environment in high-fat diet-fed mice were investigated. C57BL/6J mice were treated with a regular-fat (RF) diet, a high-fat (HF) diet, or a high-fat diet supplemented with OS starch (HFOSS). Fecal short-chain fatty acids (SCFAs) were quantified using gas chromatography, and the fecal microbiota profile was analyzed by 16S rDNA sequencing. One-way ANOVA and metastats analysis were performed for statistical analysis. After 22 weeks of feeding, mice in the HFOSS group had significantly lower body weight, body fat, liver weight, and cumulative food intake than those in the HF group but higher than that of the RF group. Fecal total SCFA, acetic, propionic, and butyric acid concentrations were significantly higher in the HFOSS group than that in the HF and RF groups. OS starch intervention increased the relative abundance of Parabacteroides, Alistipes, and Ruminiclostridium_5 and decreased that of Tyzzerella, Oscillibacter, Desulfovibrio, and Anaerotruncus compared with the RF and HF groups. The relative abundance of Lachnospiraceae_UCG-006 in the HFOSS group was lower than that in the HF group but higher than that in the RF group. In conclusion, OS starch prevents fat accumulation in high-fat diet-fed mice and might provide potential health benefits due to its fermentability in the gut and its ability to regulate gut microbial community structure.

Preparation and characterization of octenyl succinic anhydride-modified ginkgo seed starch with enhanced physicochemical and emulsifying properties

A quick preparation of octenylsuccinylated (OS)-ginkgo seed starch was proposed by lipase-coupling esterification within 30 min, and the physicochemical and emulsifying properties of OS-ginkgo seed starch were evaluated. High-performance liquid chromatography results revealed that ginkgolic acid in ginkgo seed starch was too low to be detected, which improved the biosafety and application range of OS-ginkgo seed starch. The degree of substitution (DS) of OS-ginkgo starch varied from 0.006 to 0.0169 depending on the lipase concentration increased from 0% to 1% (w/w, based on the volume of starch solution), and the reaction efficiency obtained the highest value of 68.5% at the lipase concentration of 1%. Fourier transform infrared spectra of OS-ginkgo seed starch confirmed ester carbonyl splicing in the starch molecular with the characteristic peaks at 1722 and 1567 cm^-1 . Scanning electron microscopy observations revealed that the esterification occurred mainly in the amorphous regions with slight morphological modification. X-ray diffractions suggested that no crystal change occurred on the starch granule. The thermal analysis revealed that OS-ginkgo seed starch showed a lower temperature and endothermic enthalpy for gelatinization, and presented enhanced and DS-dependent emulsifying properties and in vitro antidigestion properties. PRACTICAL APPLICATION: Results indicated that OS-ginkgo seed starch prepared by lipase-coupling esterification would be an alternative emulsion stabilizer for encapsulation and delivery of hydrophobic components. This study would provide an alternative method for the efficient and economical production of OS-ginkgo seed starch, thereby broadening its application in commercial exploitation.

Fabrication and characterization of Pickering high internal phase emulsions stabilized by debranched starch-capric acid complex nanoparticles

High internal phase emulsions (HIPEs) stabilized by debranched starch-capric acid (DBS-CA) complex nanoparticles were fabricated and their performance was evaluated. DBS-CA was prepared through enzymatic debranching and solid encapsulation methods, and displayed V-type crystalline structure. Contact angle measurements show enhanced hydrophobicity of DBS-CA compared to native starch. The DBS-CA nanoparticles have an average size of 463.77 nm and tended to be aggregating as analyzed by scanning electron microscope and dynamic light scattering particle size analysis. When used as a particulate emulsifier, DBS-CA could stabilize HIPEs with oil volume fraction as high as 80%. The HIPEs showed pH-dependent properties; good storage stability and mechanical strength were achieved within pH range from 3 to 11, especially under alkaline conditions. It was proposed that smaller particle size and higher surface charging were responsible for the more tightly connected gel structure and thus their performance. This study demonstrates a novel approach to fabricate food-grade Pickering HIPEs, which may have many promising potential applications in the food industry.

Effects of acid-ethanol hydrolysis and debranch on acetylated starch and its potential used for curcumin carrier

Acetylated acid-ethanol hydrolyzed (AHS) and acetylated debranched starch (ADS) were investigated as prospective nanocarriers. Both acid-ethanol hydrolysis and debranching decreased the molecular weight and viscosity of starch. Acid-ethanol hydrolyzed starch remained the original microstructure, which was confirmed by results of scanning electron microscopy. New absorption peaks in FTIR spectra of starch confirmed the occurrence of acetylation. The substitution degree (DS) of ADS could reach up to 1.18, while that of AHS could be improved by increasing the ethanol concentration. The developed nanoparticles showed uniform spherical structure and the size of that approximated 180-260 nm. The critical micelle concentration was 0.049 mg/mL, and the shift in fluorescence spectra confirmed the interaction between starch and curcumin. These results indicate show that high DS of AHS and ADS could be used as a potential carrier for curcumin delivery.

Structural factors governing starch digestion and glycemic responses and how they can be modified by enzymatic approaches: A review and a guide

Starch is the most abundant glycemic carbohydrate in the human diet. Consumption of starch-rich food products that elicit high glycemic responses has been linked to the occurrence of noncommunicable diseases such as cardiovascular disease and diabetes mellitus type II. Understanding the structural features that govern starch digestibility is a prerequisite for developing strategies to mitigate any negative health implications it may have. Here, we review the aspects of the fine molecular structure that in native, gelatinized, and gelled/retrograded starch directly impact its digestibility and thus human health. We next provide an informed guidance for lowering its digestibility by using specific enzymes tailoring its molecular and three-dimensional supramolecular structure. We finally discuss in vivo studies of the glycemic responses to enzymatically modified starches and relevant food applications. Overall, structure-digestibility relationships provide opportunities for targeted modification of starch during food production and improving the nutritional profile of starchy foods.