Impact of pulsed light treatment on the quality properties and microbiological aspects of red bell pepper fresh-cuts

Incorporation of ascorbic acid in chitosan-based coating combined with plasma-activated water: A technology for quality preservation of red grapes after simulated transportation

Red grapes possess multiple bioactivities but are highly susceptible to spoilage due to the lack of efficient preservation techniques. Plasma-activated water (PAW) treatment and the incorporation of antioxidants in bio-based coatings are promising methods for preserving produce. In this study, we tested a novel combination by incorporating ascorbic acid (AA) into a chitosan-based edible coating (CH) and combining it with plasma-activated water (PAW) treatment (CA-PAW) before simulating transport vibrations to extend the shelf-life of red grapes. The results from storage at 4 °C for 20 d indicated that the CA-PAW treatment reduced microbial counts by 2.62 log10 CFU/g for bacteria, 1.72 log10 CFU/g for yeasts and molds, and 1.1 log10 CFU/g for coliforms, in comparison to the control group treated with sterile deionized water. Total phenols and total flavonoid content were the highest observed, at 111.2 mg GAE/100 g and 262.67 mg RE/100 g, respectively. This treatment also inhibited water migration and erosion, and reduced damage to cell structure. Microstructural observations revealed that the CH coating on the surface of red grapes diminished the degradation of bioactive components. In conclusion, the CA-PAW treatment effectively inhibited the adverse physiological changes caused by vibration and mechanical damage to red grapes, maintained their nutritional and sensory qualities, and extended the shelf life by at least 8 d.

Radical species generating technologies for decontamination of Listeria species in food: a recent review report

Foodborne illnesses occur due to the contamination of fresh, frozen, or processed food products by some pathogens. Among several pathogens responsible for the illnesses, Listeria monocytogenes is one of the lethal bacteria that endangers public health. Several preexisting and novel technologies, especially non-thermal technologies are being studied for their antimicrobial effects, particularly toward L. monocytogenes. Some noteworthy emerging technologies include ultraviolet (UV) or light-emitting diode (LED), pulsed light, cold plasma, and ozonation. These technologies are gaining popularity since no heat is employed and undesirable deterioration of food quality, especially texture, and taste is devoided. This review aims to summarize the most recent advances in non-thermal processing technologies and their effect on inactivating L. monocytogenes in food products and on sanitizing packaging materials. These technologies use varying mechanisms, such as photoinactivation, photosensitization, disruption of bacterial membrane and cytoplasm, etc. This review can help food processing industries select the appropriate processing techniques for optimal benefits, in which the structural integrity of food can be preserved while simultaneously destroying L. monocytogenes present in foods. To eliminate Listeria spp., different technologies possess varying mechanisms such as rupturing the cell wall, formation of pyrimidine dimers in the DNA through photochemical effect, excitation of endogenous porphyrins by photosensitizers, generating reactive species, causing leakage of cellular contents and oxidizing proteins and lipids. These technologies provide an alternative to heat-based sterilization technologies and further development is still required to minimize the drawbacks associated with some technologies.

Effect of pulsed light on myofibrillar protein of large yellow croaker (Pseudosciaena crocea) during refrigerated storage

This study mainly evaluated the effect of different energies of pulsed light (PL) treatment (100, 200, 300, 400, and 500 J/pulse) on myofibrillar protein (MP) of large yellow croaker during refrigerated storage. The results showed that PL treatment would cause a certain degree of oxidation to the MP of large yellow croaker at the initial stage, which showed that the total sulfhydryl content of the protein decreased, the carbonyl content and the average particle size increased, and the β-sheet to β-turn transformation, the tertiary structure of the protein unfolds, and the hydrophobic groups were exposed, causing the reduction of intrinsic fluorescence intensity. However, subsequent storage studies found that PL treatment could slow down the oxidation rate of MP. The decrease rate of total sulfhydryl content and the increase rate of carbonyl content in the 300 J/pulse group were both reduced by about 1.7 times compared with the control group. At the same time, the PL treatment with this intensity could also better protect the secondary structure, tertiary structure, and microstructure of MP. This study provided theoretical basis and reference for analyzing the quality change rule and mechanism of large yellow croaker during refrigerated storage after PL treatment. Studies have shown that PL treatment can reduce the adverse changes of MP in large yellow croaker during cold storage.

Ultrasound Treatment Improves Fruit Quality of Postharvest Blood Oranges (Citrus sinensis L. Osbeck): Anthocyanin Enrichment and Its Biosynthesis

This study was to investigate the effects of different nonthermal treatments on quality attributes, anthocyanin profiles, and gene expressions related to anthocyanin biosynthesis during low-temperature storage, including pulsed light (PL), magnetic energy (ME), and ultrasound (US). Among these treatments, 1 min US treatment was the most effective method for improving fruit quality and increasing total anthocyanin contents (by 29.89 ± 3.32%) as well as individual anthocyanins during low-temperature storage of 28 days. This treatment resulted in high color intensity, intact cellular architectures, and positive sensory evaluation. In contrast, PL and ME treatments displayed negative effects on quality improvement, leading to the destruction of cell architectures and inhibiting anthocyanin levels. Furthermore, qPCR analysis revealed that the structural genes (C4H, CHS1, CHS2, CHI, F3H, ANS, and GST) related to anthocyanin biosynthesis and transport were the target genes and upregulated in response to the cavitation effect of US treatment.

The influence of non-thermal technologies on color pigments of food materials: An updated review

The color of any food is influenced by several factors, such as food attributes (presence of pigments, maturity, and variety), processing methods, packaging, and storage conditions. Thus, measuring the color profile of food can be used to control the quality of food and examine the changes in chemical composition. With the advent of non-thermal processing techniques and their growing significance in the industry, there is a demand to understand the effects of these technologies on various quality attributes, including color. This paper reviews the effects of novel, non-thermal processing technologies on the color attributes of processed food and the implications on consumer acceptability. The recent developments in this context and a discussion on color systems and various color measurement techniques are also included. The novel non-thermal techniques, including high-pressure processing, pulsed electric field, ultrasonication, and irradiation which employ low processing temperatures for a short period, have been found effective. Since food products are processed at ambient temperature by subjecting them to non-thermal treatment for a very short time, there is no possibility of damage to heat-sensitive nutrient components in the food, any deterioration in the texture of the food, and any toxic compounds in the food due to heat. These techniques not only yield higher nutritional quality but are also observed to maintain better color attributes. However, suppose foods are exposed to prolonged exposure or processed at a higher intensity. In that case, these non-thermal technologies can cause undesirable changes in food, such as oxidation of lipids and loss of color and flavor. Developing equipment for batch food processing using non-thermal technology, understanding the appropriate mechanisms, developing processing standards using non-thermal processes, and clarifying consumer myths and misconceptions about these technologies will help promote non-thermal technologies in the food industry.

Recent advances on postharvest technologies of bell pepper: A review

The bell pepper (Capsicum annuum L.) is a commercially important horticultural crop grown in tropical and sub-tropical areas across the world. Despite this importance, it is a perishable vegetable with a limited shelf life and high disease susceptibility. Bell pepper output has expanded significantly in recent years. However, this crop is still experiencing close to 40% postharvest losses annually. Chemical fumigation for postharvest disease control of bell pepper has been shown to be efficient against fungal infections, but environmental impact and consumption hazards limit its full use. Recently, non-chemical techniques including biological and botanical methods, non-destructive technologies and Artificial intelligence have been demonstrated to be effective as postharvest management of bell pepper. The paper provides exciting information on recent and emerging techniques for curtailing these losses in bell pepper, alongside their mechanism and existing benefits. The current limitations of these techniques as well as recommendations for potential applications are also addressed.

Pulsed light of near-infrared and visible light wavelengths induces the accumulation of carotenoids in tomato fruits during post-treatment time

Pulsed light (PL) is proposed as a novel strategy for the food industry to enhance the antioxidant potential of fruits and vegetables for industrial uses. The main aim of this work is to evaluate the impact of postharvest PL treatments of different spectral ranges on the carotenoid concentration as well as quality attributes of tomatoes during post-treatment time. Doses of wide-spectrum light (180-1100 nm), full-spectrum without ultraviolet (UV)-C wavelengths (305-1100 nm), and visible (VIS) + near-infrared light (NIR) (400-1100 nm) were compared. Total carotenoids, lycopene, and chlorophyll contents were spectrophotometrically assessed just after treatments and 1, 5, and 10 days post-treatment. PL treatments accelerated the accumulation of both total carotenoids and lycopene concentrations in tomato fruits. Nevertheless, the efficacy of PL depended on the applied spectral range. Tomato subjected to VIS + NIR treatment exhibited the greatest enhancement in total carotenoids (31 %) and lycopene (35 %) content at day 5 post-treatment and quality attributes were not affected. Conversely, UV-light exposure did not enhance carotenoid concentrations. These results evidenced that VIS + NIR treatments induced a faster accumulation of carotenoids without negatively affecting tomato quality attributes. PRACTICAL APPLICATION: The integration of visible and near-infrared (VIS + NIR) light filters in pulsed light (PL) processing allows enhancing the accumulation of bioactive compounds in tomato tissues in a sustainable way, which can be processed to obtain derived products (e.g., juices, purees) with health-promoting properties. PL technology is characterized by a lack of residual compounds and the absence of applying chemicals potentially harmful to humans. Industries can attract the attention of consumers through their application, which allows offering this added value.

The Impact of the Fermentation Method on the Pigment Content in Pickled Beetroot and Red Bell Pepper Juices and Freeze-Dried Powders

The beetroot and red bell pepper are vegetables rich in active ingredients, and their potential for health benefits are crucial. Both presented raw materials are rich in natural pigments, but are unstable and seasonal; thus, it was decided to take steps to extend their durability. Lactic fermentation has been recognized as a food preservation method, requiring minimal resources. The activities undertaken were also aimed at creating a new product with a coloring and probiotic potential. For this reason, the study aimed to evaluate the impact of the method of fermentation on the content of active compounds (pigments) in pickled juices and freeze-dried powders. The lactic acid fermentation guided in two ways. The second step of the research was to obtain powders in the freeze-drying process. For fermentation, Levilactobacillus brevis and Limosilactobacillus fermentum were used. In juices and powders, pigments, color, and dry matter were tested. In this research, no differences in fermented juice pigment contents were seen; however, the color coefficient differed in raw juices. The freeze-drying process resulted in lowering the pigment content, and increasing dry matter and good storage conditions (glass transition temperatures 48–66 °C). The selection of vegetable methods suggested the use of fermentation and mixing it with a marinade (higher pigments and lactic acid bacteria content). All powders were stable and can be used as a colorant source, whereas for probiotic properties, a higher number of bacteria is needed.

Effect of nonthermal treatments on selected natural food pigments and color changes in plant material

In recent years, traditional high-temperature food processing is continuously being replaced by nonthermal processes. Nonthermal processes have a positive effect on food quality, including color and maintaining natural food pigments. Thus, this article describes the influence of nonthermal, new, and traditional treatments on natural food pigments and color changes in plant materials. Characteristics of natural pigments, such as anthocyanins, betalains, carotenoids, chlorophylls, and so forth available in the plant tissue, are shortly presented. Also, the characteristics and mechanism of nonthermal processes such as pulsed electric field, ultrasound, high hydrostatic pressure, pulsed light, cold plasma, supercritical fluid extraction, and lactic acid fermentation are described. Furthermore, the disadvantages of these processes are mentioned. Each treatment is evaluated in terms of its effects on all types of natural food pigments, and the possible applications are discussed. Analysis of the latest literature showed that the use of nonthermal technologies resulted in better preservation of pigments contained in the plant tissue and improved yield of extraction. However, it is important to select the appropriate processing parameters and to optimize this process in relation to a specific type of raw material.