Encapsulation of potential probiotic and canola oil through emulsification and ionotropic gelation, using protein/polysaccharides Maillard conjugates as emulsifiers

Construction of emulsion gel based on the interaction of anionic polysaccharide and soy protein isolate: Focusing on structural, emulsification and functional properties

In this study, the effects on the structures and emulsion gels of carrageenan (CA) and gum arabic (GA) with soybean protein isolate (SPI) were investigated. The results showed that CA and GA exposed hydrophobic groups to SPI, and formed complexes through non-covalent interactions to improve the stability of the complexes. Furthermore, the emulsion gels based on the emulsions exhibited that CA formed emulsion-filled gels with higher elasticity, stronger gel strength, and thermal reversibility, whereas GA formed emulsion-aggregated gels with higher viscosity, and a weak-gel network. The results of digestion showed that, CA was more helpful to slow down the release of free fatty acids and protect vitamin E during digestion. Compared with SPI-GA emulsion gel, SPI-CA emulsion gel had better physicochemical properties and stronger network structure. The results of this study may be useful in the development of anionic polysaccharides that interact with SPI, and they may provide new insights on the preparation of emulsion gels that slowly release fat-soluble nutrients.

Emulsification and stabilisation technologies used for the inclusion of lipophilic functional ingredients in food systems

Food industry is increasingly using functional ingredients to improve the food product quality. Lipid-containing functional ingredients are important sources of nutrients. This review examines the current state of emulsification and stabilisation technologies for incorporating lipophilic functional ingredients into food systems. Lipophilic functional ingredients, such as omega-3 fatty acids, carotenoids, and fat-soluble vitamins, offer numerous health benefits but present challenges due to their limited solubility in water-based food matrices. Emulsification techniques enable the dispersion of these ingredients in aqueous environments, facilitating their inclusion in a variety of food products. This review highlights recent advances in food emulsion formulation, emulsification methods and stabilisation techniques which, together, improve the stability and bioavailability of lipophilic compounds. The role of various emulsifiers, stabilizers, and encapsulation materials in enhancing the functionality of these ingredients is also explored. Furthermore, the review discusses different stabilisation techniques which can yield in emulsion in a solid or liquid state. By providing a comprehensive overview of current technologies, this review aims to guide future research and application in the development of functional foods enriched with lipophilic ingredients.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

Physicochemical characterization and environmental stability of a curcumin-loaded Pickering nanoemulsion using a pea protein isolate-dextran conjugate via the Maillard reaction

This study investigated pea protein isolate (PPI) and dextran (DX) conjugates produced via the Maillard reaction as Pickering stabilizers for various food applications. The results found that as heating time increased (0-5 h), the grafting degree heightened. The PPI-DX conjugate exhibited a rough porous surface in contrast to native PPI, accompanied by changes in molecular weight and secondary structure. Additionally, the aggregation of low-solubility PPI was partially inhibited due to the contribution of increased solubility and reduced surface hydrophobicity by glycation. Curcumin-loaded Pickering nanoemulsions stabilized with PPI-DX had smaller droplets and higher curcumin encapsulation (greater than80 %) than PPI-stabilized nanoemulsions. PPI-DX adsorbed on the interface showed improved physical stability compared to PPI alone, even after various pH conditions and three heat treatments. The nanoemulsion stabilized with PPI-DX demonstrated improved apparent viscosity and dispersion stability. These findings highlight the effectiveness of PPI-DX conjugates as stabilizers for developing stable and functional Pickering nanoemulsions.

Characterization and stability investigation of rhein encapsulated microcapsules using different enteric biopolymers with pullulan and Jiuzao glutelin conjugates via Maillard reaction

The poor water solubility and rhein (RH) stability limit its application in the functional food industry. In the present study, the RH-loaded water-in-oil-in-water nano emulsion and microcapsules were prepared using the conjugates of pullulan-Jiuzao glutelin (JG) (m/m, 2:1, PJC-2) obtained by Maillard reaction and enteric-soluble materials (polymethlacrylic acid, hydroxypropyl methylcellulose phthalate, cellulose acetate phthalate, and D-mannitol). The effects of different formulations on the microstructure, physicochemical properties, and storage stability of microcapsules were analyzed. The results showed that microcapsules exhibited stability against different external environments. The encapsulation efficiency of RH in the four enteric-soluble-PJC-2 double-deck microcapsules (70.03 ± 3.24%-91.08 ± 4.78%) was significantly improved than PJC-2 ones (61.84 ± 0.47%). The antioxidant activity and stability of RH in the microcapsules were improved (ABTS, 49.7%-113.93%; DPPH, 40.85%-101.82%; FRA, 62.32%-126.42%; and FCA, 70.58%-147.20%) after in vitro simulated digestion and extreme environmental conditions compared to free RH. This work provides a microcapsule based on PJC-2 with enteric-soluble materials for insoluble functional ingredients to improve solubility, stability, and bioactivity in the food industry.

The effect of Maillard reaction on the lactose crystallization and flavor release in lactose/WPI/inulin encapsulation

The crystallization of lactose usually causes the structural collapse and core material escape of flavor encapsulations. The objective of this study was to investigate the effects of different grafting degrees of WPI-inulin Maillard reaction products on the lactose crystallization and the subsequent release behaviors. Ethyl acetate was chosen as the model volatile flavor and the encapsulations were prepared by freeze-drying. The results found that the encapsulation efficiency was significantly increased from 30% to over 80% by using MRPs as wall materials. Those microparticles showed the greater flavor retention and lower moisture adsorption. In addition, the encapsulations produced by the proper Maillard reaction times (e.g., 48 h and 72 h) could effectively delay the lactose crystallization and thus improve the structural stability of the matrix. This innovation finding aims to use the Maillard reaction to control the crystallization behaviors and enhance the usefulness of high-lactose containing products in encapsulation systems.

Progress in the Application of Food-Grade Emulsions

The detailed investigation of food-grade emulsions, which possess considerable structural and functional advantages, remains ongoing to enhance our understanding of these dispersion systems and to expand their application scope. This work reviews the applications of food-grade emulsions on the dispersed phase, interface structure, and macroscopic scales; further, it discusses the corresponding factors of influence, the selection and design of food dispersion systems, and the expansion of their application scope. Specifically, applications on the dispersed-phase scale mainly include delivery by soft matter carriers and auxiliary extraction/separation, while applications on the scale of the interface structure involve biphasic systems for enzymatic catalysis and systems that can influence substance digestion/absorption, washing, and disinfection. Future research on these scales should therefore focus on surface-active substances, real interface structure compositions, and the design of interface layers with antioxidant properties. By contrast, applications on the macroscopic scale mainly include the design of soft materials for structured food, in addition to various material applications and other emerging uses. In this case, future research should focus on the interactions between emulsion systems and food ingredients, the effects of food process engineering, safety, nutrition, and metabolism. Considering the ongoing research in this field, we believe that this review will be useful for researchers aiming to explore the applications of food-grade emulsions.

Fabrication and Characterization of Gel Beads of Whey Isolate Protein-Pectin Complex for Loading Quercetin and Their Digestion Release

In this study, emulsion gel beads for loading quercetin were prepared through an emulsification/gelation process using whey protein isolate (WPI) and pectin. Emulsion gel beads’ properties were investigated by different pectin content. Additionally, the physicochemical properties, morphology and quercetin release properties from beads were explored. Firstly, electrical characteristics and the rheology of bead-forming solutions were measured, revealing that all systems had strong negative charge and exhibited shear-thinning behavior. The textural results demonstrated that the properties of emulsion gel beads were improved with increasing the content of pectin. It was also confirmed that crosslinking was formed between WPI emulsion and pectin by Fourier Transform Infrared (FTIR) analysis and thermogravimetric analysis (TGA). In addition, the shape of the beads was spherical or ellipses with smooth surfaces and they had a tight gel network of internal structures, which was visualized by using electron microscopy (SEM). Finally, the amount of quercetin released in vitro was gradually decreased with increasing pectin content; it was as low as 0.59%. These results revealed that WPI emulsion–pectin gel beads might be an effective delivery system for quercetin as a colon target and are worth exploring further.

The Layered Encapsulation of Vitamin B2 and β-Carotene in Multilayer Alginate/Chitosan Gel Microspheres: Improving the Bioaccessibility of Vitamin B2 and β-Carotene

This research underlines the potential of alginate multilayered gel microspheres for the layered encapsulation and the simultaneous delivery of vitamin B₂ (VB) and β-carotene (BC). Chitosan was used to improve the stability and controlled release ability of alginate-based gel microspheres. It was shown that a clear multilayered structure possessed the characteristics of pH response, and excellent thermal stability. The sodium alginate concentration and the number of layers had notable effects on mechanical properties and particle size of gel microspheres. Fourier-transform infrared spectroscopy and X-ray diffraction analyses further proved that VB and BC were encapsulated within the gel microspheres. Compared with the three-layer VB-loaded gel microspheres, the total release of VB from the three-layer VB and BC-loaded gel decreased from 93.23% to 85.58%. The total release of BC from the three-layer VB and BC-loaded gel increased from 66.11% to 69.24% compared with three-layer BC-loaded gel. The simultaneous encapsulation of VB and BC in multilayered gel microspheres can markedly improve their bioaccessibility and bioavailability. These results showed the multilayer gel microspheres synthesized herein have potential for applications in the layered encapsulation and simultaneous delivery of various bioactive substances to the intestinal tract.

Whey Proteins Isolate-Based Biopolymeric Combinations to Microencapsulate Supercritical Fluid Extracted Oleoresins from Sea Buckthorn Pomace

In this study, high-value, carotenoid-rich oleoresin obtained by supercritical carbon dioxide (SFE-CO₂) extraction was used to develop five variants of microencapsulated delivery system, based on whey proteins isolate (WPI), in combination with inulin (I), pectin (P) or lactose (L). The WPI:I and WPI:L variants were also obtained by conjugation via Maillard reaction. The microencapsulation of the SFE-CO₂ sea buckthorn pomace oleoresin was performed by emulsion, complex coacervation and freeze-drying, which allowed for the obtaining of five powders, with different phytochemicals profile. The WPI:I conjugate showed the highest level of total carotenoids, whereas the counterpart WPI:L showed the highest content in linoleic acid (46 ± 1 mg/g) and palmitoleic acid (20.0 ± 0.5 mg/g). The β-tocopherol and β-sitosterol were identified in all variants, with the highest content in the conjugated WPI:L variant. Both WPI:L and WPI:I conjugate samples presented similar IC50 value for inhibitory activity against pancreatic lipase and α-amylase; the highest activity was observed for the conjugated WPI:I. The WPI:P combination allowed the highest release of carotenoids in the gastro-intestinal environment. All the powders exhibited poor flowing properties, whereas water activity (a_w) ranged from 0.084 ± 0.03 to 0.241 ± 0.003, suggesting that all variants are stable during storage. In case of solubility, significant differences were noticed between non-heated and glycated samples, with the highest value for the WPI:I and the lowest for glycated WPI:I. The structural analysis revealed the presence of finer spherosomes in WPI:I and WPI:L, with a reduced clustering capacity, whereas the particles in the conjugated samples were more uniform and aggregated into a three-dimensional network.