Cryogel disks for lactase immobilization and lactose-free milk production

Purification of pineapple bromelain by IMAC chromatography using chlorophyll-activated macroporous matrices

This study investigated the purification of bromelain obtained from pineapple fruit using a new adsorbent for immobilized metal ion affinity chromatography (IMAC), with chlorophyll obtained from plant leaves as a chelating agent. The purification of bromelain was evaluated in batches from the crude extract of pineapple pulp (EXT), and the extract precipitated with 50 % ammonium sulfate (EXT.PR), the imidazole buffer (200 mM, pH 7.2) being analyzed and sodium acetate buffer, pH 5.0 + 1.0 NaCl as elution solutions. All methods tested could separate forms of bromelain with molecular weights between ±21 to 25 kDa. Although the technique using EXT.PR stood out in terms of purity, presenting a purification factor of around 3.09 ± 0.31 for elution with imidazole and 4.23 ± 0.12 for acetate buffer solution. In contrast, the EXT methods obtained values between 2.44 ± 0.23 and 3.21 ± 0.74 for elution with imidazole and acetate buffer, respectively, for purification from EXT.PR has lower yield values (around 5 %) than EXT (around 15 %). The number of steps tends to reduce yield and increase process costs, so the purification process in a monolithic bed coupled to the chromatographic system using the crude extract was evaluated. The final product obtained had a purification factor of 6, with a specific enzymatic activity of 59.61 ± 0.00 U·mg-1 and a yield of around 39 %, with only one band observed in the SDS-PAGE electrophoresis analysis, indicating that the matrix produced can separate specific proteins from the total fraction in the raw material. The IMAC matrix immobilized with chlorophyll proved promising and viable for application in protease purification processes.

Role of Clay Substrate Molecular Interactions in Some Dairy Technology Applications

The use of clay materials in dairy technology requires a multidisciplinary approach that allows correlating clay efficiency in the targeted application to its interactions with milk components. For profitability reasons, natural clays and clay minerals can be used as low-cost and harmless food-compatible materials for improving key processes such as fermentation and coagulation. Under chemical stability conditions, clay materials can act as adsorbents, since anionic clay minerals such as hydrotalcite already showed effectiveness in the continuous removal of lactic acid via in situ anion exchange during fermentation and ex situ regeneration by ozone. Raw and modified bentonites and smectites have also been used as adsorbents in aflatoxin retention and as acidic species in milk acidification and coagulation. Aflatoxins and organophilic milk components, particularly non-charged caseins around their isoelectric points, are expected to display high affinity towards high silica regions on the clay surface. Here, clay interactions with milk components are key factors that govern adsorption and surface physicochemical processes. Knowledge about these interactions and changes in clay behavior according to the pH and chemical composition of the liquid media and, more importantly, clay chemical stability is an essential requirement for understanding process improvements in dairy technology, both upstream and downstream of milk production. The present paper provides a comprehensive review with deep analysis and synthesis of the main findings of studies in this area. This may be greatly useful for mastering milk processing efficiency and envisaging new prospects in dairy technology.

Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning

Cryogels represent a class of porous sponge-like materials possessing unique properties including high-fidelity reproduction of tissue structure and maximized permeability. Their architecture is mainly based on an interconnected network of macropores that provides sufficient stability while allowing the movement of substances through the material. In most cryogel applications, the pore size is very important, especially when the material is used as a 3D scaffold for tissue culture, applied as a filter, or utilized as a membrane. In this study, poly(dimethylacrylamide-co-2-hydroxyethyl methacrylate) cryogels have been prepared by two preparation methods to investigate the reproducibility of homogeneous pore structures and pore sizes. Automated image analysis algorithms were developed to rapidly evaluate cryogel pore sizes based on scanning electron microscopy (SEM) images. The quantification approach contained a unique combination of classical and deep learning-based algorithms. To validate the accuracy of the two models, we compared the results obtained from automated SEM image analysis with those from manual pore size determinations and mercury intrusion porosimetry (MIP) measurements. Effect sizes were calculated to compare the results from manual and automated pore size measurements for the cryogel reproducibility series. 81% of the values obtained revealed only trivial differences, which strongly suggests that automated image analysis can reliably substitute the manual evaluation of cryogel pore sizes. The use of an adapted reactor setup yielded cryogels with heterogeneous morphologies in the absence of recognizable pore structures. With the conventional cryogel preparation using plastic syringes, the obtained cryogels represented highly reproducible morphologies and pore sizes in the range between 17 and 22 μm. Calculated effect sizes within the cryogel replicate series revealed only trivial differences between the obtained pore sizes in 83.5% or 99.4% of the data (classical approach and deep learning-based approach, respectively).

Advances in Low-Lactose/Lactose-Free Dairy Products and Their Production

With increasing health awareness worldwide, lactose intolerance has become a major concern of consumers, creating new market opportunities for low-lactose/lactose-free dairy foods. In recent years, through innovating processes and technologies, dairy manufacturers have significantly improved the variety, and functional and sensory qualities of low-lactose and lactose-free dairy products. Based on this, this paper first covers the pathology and epidemiology of lactose intolerance and market trends. Then, we focus on current advantages and disadvantages of different lactose hydrolysis technologies and improvements in these technologies to enhance nutritional value, and functional, sensory, and quality properties of lactose-free dairy products. We found that more and more cutting-edge technologies are being applied to the production of lactose-free dairy products, and that these technologies greatly improve the quality and production efficiency of lactose-free dairy products. Hopefully, our review can provide a theoretical basis for the marketing expansion and consumption guidance for low-lactose/lactose-free dairy products.

Optimized Peppermint Essential Oil Microcapsules Loaded into Gelatin-Based Cryogels with Enhanced Antimicrobial Activity

In this study, chitosan (Chi) was used to microencapsulate peppermint essential oil (PEO). A novel gelatin-based cryogel loaded with PEO microcapsules was further developed and characterized for potential applications. Four different cryogel systems were designed, and the morphological, molecular, physical and antibacterial properties were investigated. Additionally, the antimicrobial properties of PEO, alone and microcapsulated, incorporated into the cryogel network were evaluated. The observed gel structure of cryogels exhibited a highly porous morphology in the microcapsules. The highest values of the equilibrium swelling ratio were acquired for the GelCryo-ChiCap and GelCryo-PEO@ChiCap samples. The contact angle GelCryo-PEO@ChiCap sample was lower than the control (GelCryo) due to the water repelling of the essential oil. It has been found that the incorporation of encapsulated PEO into the cryogels would be more advantageous compared to its direct addition. Moreover, GelCryo-PEO@ChiCap cryogels showed the strongest antibacterial activities, especially against Staphylococcus aureus (Gram-positive bacteria) and Escherichia coli (Gram-negative bacteria). The system that was developed showed promising results, indicating an improved antibacterial efficacy and enhanced structural properties due to the presence of microcapsules. These findings suggest that the system may be an appropriate candidate for various applications, including, but not limited to, drug release, tissue engineering, and food packaging. Finally, this system demonstrates a strategy to stabilize the releasing of the volatile compounds for creating successful results.

Co-Immobilization of Lactase and Glucose Isomerase on the Novel g-C3N4/CF Composite Carrier for Lactulose Production

The g-C₃N₄/CF composite carrier was prepared by ultrasound-assisted maceration and high-temperature calcination. The enzyme immobilization using the g-C₃N₄/CF as the novel carrier to immobilize lactase and glucose isomerase was enhanced for lactulose production. The carbon fiber (CF) was mixed with melamine powder in the mass ratio of 1:8. The g-C₃N₄/CF composite carrier was obtained by calcination at 550 °C for 3 h. After the analysis of characteristics, the g-C₃N₄/CF was successfully composited with the carbon nitride and CF, displaying the improvement of co-immobilization efficiency with the positive effects on the stability of the enzyme. The immobilization efficiency of the co-immobilized enzyme was 37% by the novel carrier of g-C₃N₄/CF, with the enzyme activity of 13.89 U g^-1 at 60 °C. The relative activities of co-immobilized enzymes maintained much more steadily at the wider pH and higher temperature than those of the free dual enzymes, respectively. In the multi-batches of lactulose production, the relative conversion rates in enzymes co-immobilized by the composite carrier were higher than that of the free enzymes during the first four batches, as well as maintaining about a 90% relative conversation rate after the sixth batch. This study provides a novel method for the application of g-C₃N₄/CF in the field of immobilizing enzymes for the production of lactulose.