Antifungal activity of natamycin and development of an edible film based on hydroxyethylcellulose to avoid Penicillium spp. growth on low-moisture mozzarella cheese

Preparation and characterization of pectin/hydroxyethyl cellulose/clay/TiO2 bionanocomposite films for microbial pathogen removal from contaminated water

Some of conventional wastewater disinfectants can have a harmful influence on the environment as well as human health. The aim of this investigation was synthesis and characterizes ecofriendly pectin/hydroxyethyl cellulose (HEC)/clay and pectin/HEC/clay incorporated with titanium dioxide nanoparticles (TiO2NPs) and use the prepared bionanocomposite as microbial disinfectants for real wastewater. Pectin/HEC/clay and pectin/HEC/clay/TiO2 bionanocomposite were characterized by various methods including X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA). Mechanical properties and water vapor permeability (WVP) were carried out. The results of SEM showed that, the prepared bionanocomposite had a smooth surface. Additionally, TiO2 nanoparticles to the pectin/HEC/clay composites may lead to changes in the FTIR spectrum. The intensity of XRD peaks indicated that, TiO2NPs was small size crystallite. TGA illustrated that pectin has moderate thermal stability, while HEC generally exhibits good thermal stability. The TEM showed that, TiO2 nanoparticles have diameters <25 nm. On the other hand, antimicrobial activities of pectin/HEC/clay against Escherichia coli (E. coli), Staphylococcus aureus and Candida albicans have been enhanced by adding TiO2NPs. The minimum inhibitory concentration (MIC) of pectin/HEC/clay/TiO2 against E. coli was 200 mg/mL. Moreover, complete eradication of E. coli, Salmonella and Candida spp. from real wastewater was observed by using pectin/HEC/clay/TiO2 bionanocomposite. Finally, it can be concluded that, the synthesized bionanocomposite is environmentally friendly and considered an excellent disinfectant matter for removal of the microbial pathogens from wastewater to safely reuse.

Natural Antimicrobials in Dairy Products: Benefits, Challenges, and Future Trends

This review delves into using natural antimicrobials in the dairy industry and examines various sources of these compounds, including microbial, plant, and animal sources. It discusses the mechanisms by which they inhibit microbial growth, for example, by binding to the cell wall's precursor molecule of the target microorganism, consequently inhibiting its biosynthesis, and interfering in the molecule transport mechanism, leading to cell death. In general, they prove to be effective against the main pathogens and spoilage found in food, such as Escherichia coli, Staphylococcus aureus, Bacillus spp., Salmonella spp., mold, and yeast. Moreover, this review explores encapsulation technology as a promising approach for increasing the viability of natural antimicrobials against unfavorable conditions such as pH, temperature, and oxygen exposure. Finally, this review examines the benefits and challenges of using natural antimicrobials in dairy products. While natural antimicrobials offer several advantages, including improved safety, quality, and sensory properties of dairy products, it is crucial to be aware of the challenges associated with their use, such as potential allergenicity, regulatory requirements, and consumer perception. This review concludes by emphasizing the need for further research to identify and develop effective and safe natural antimicrobials for the dairy industry to ensure the quality and safety of dairy products for consumers.

Evaluating the Quality of Cheese Slices Packaged with Na-Alginate Edible Films Supplemented with Functional Lactic Acid Bacteria Cultures after High-Pressure Processing

The aim of the current study was to assess the efficacy of Na-alginate edible films as vehicles for delivering lactic acid bacteria (LAB) with functional properties to sliced cheeses, with or without high-pressure processing (HPP). A three-strain LAB cocktail (Lactococcus lactis Τ4, Leuconostoc mesenteroides Τ25 and Lacticaseibacillus paracasei Τ26) was incorporated into Na-alginate solution in a final population of 9 log CFU/mL. The cheese slices (without or with HPP treatment at 500 MPa for 2 min) were packaged in contact with the LAB edible films (LEFs), and subsequently vacuum packed and stored at 4 °C. Cheese slices without the addition of films, with or without HPP treatment, were used as controls. In all cases, microbiological, pH and sensory analyses were performed, while the presence and the relative abundance of each strain during storage was evaluated using Random Amplified Polymorphic DNA-PCR (RAPD-PCR). In addition, organic acid determination and peptide analysis were performed using high-performance liquid chromatography. The results showed that in cheeses without HPP treatment, the microbiota consisted mostly of mesophilic LAB and lactococci (>7.0 log CFU/g), while HPP caused a reduction in the indigenous microbiota population of approximately 1−1.5 log CFU/g. In the LEF samples, the populations of mesophilic LAB and lactococci were maintained at levels of >6.35 log CFU/g during storage, regardless of the HPP treatment. Sensory evaluation revealed that the LEF samples without HPP had a slightly more acidic taste compared to the control, whereas the HPP-LEF samples exhibited the best organoleptic characteristics. RAPD-PCR confirmed that the recovered strains were attributed to the three strains that had been entrapped in the films, while the strain distribution during storage was random. Overall, the results of the study are promising since the functional LAB strains were successfully delivered to the products by the edible films until the end of storage.

Application of antimicrobial coating based on carboxymethyl cellulose and natamycin in active packaging of cheese

The effects of carboxymethyl cellulose (CMC)-natamycin (N; 0.05 and 0.5%) coating on the quality of high-moisture mozzarella cheese (HMMC) were examined. The cheeses were immersed in the coating solutions and then kept at 7 °C for 8 days and microbial specifications (i.e., total mesophilic count, total psychrophilic count, lactic acid bacteria, and yeast-mold), pH, weight loss, and sensory properties were examined. The results of the agar spot diffusion assay represented inhibitory effects of CMC-N coating solution on Aspergillus flavus, A. fumigatus, A. niger, Penicillium citrinum, and Candida albicans. In HMMC, the natamycin-free CMC coating caused a significant decrease (p < 0.05) in all microbial groups, while the addition of natamycin to the coating only reduced the count of mold and yeast. As a result, the coating with natamycin at 0.05 and 0.5% represented a 0.6 and 0.9 log cycle reduction in yeast-mold populations, respectively. Based on the total mesophilic count, the control samples reached the 7 log CFU/g on day 4, indicating a 4-day shelf life of HMMC, while in HMMC coated with and without natamycin this limit was achieved on the 8th day of storage, which indicates that the coatings have doubled the HMMC shelf life.