Quantification of polyethylene terephthalate microplastics and nanoplastics in sands, indoor dust and sludge using a simplified in-matrix depolymerization method

Microplastics in water: Occurrence, fate and removal

A global study on tap water samples has found that up to 83% of these contained microplastic fibres. These findings raise concerns about their potential health risks. Ingested microplastic particles have already been associated with harmful effects in animals, which raise concerns about similar outcomes in humans. Microplastics are ubiquitous in the environment, commonly found disposed in landfills and waste sites. Within indoor environments, the common sources are synthetic textiles, plastic bottles, and packaging. From the various point sources, they are globally distributed through air and water and can enter humans through various pathways. The finding of microplastics in fresh snow in the Antarctic highlights just how widely they are dispersed. The behaviour and health risks from microplastic particles are strongly influenced by their physicochemical properties, which is why their surfaces are important. Surface interactions are also important in pollutant transport via adsorption onto the microplastic particles. Our review covers the latest findings in microplastics research including the latest statistics in their abundance, their occurrence and fate in the environment, the methods of reducing microplastics exposure and their removal. We conclude by proposing future research directions into more effective remediation methods including new technologies and sustainable green remediation methods that need to be explored to achieve success in microplastics removal from waters at large scale.

Unraveling the micro- and nanoplastic predicament: A human-centric insight

Micro- and nanoplastics are vast anthropogenic pollutants in our direct surroundings with a robust environmental stability and a potential for a long-lasting and increasing global circulation. This has raised concerns among the public and policy makers for human health upon exposure to these particles. The micro- and nanoplastic burden on humans is currently under debate, along with criticism on the experimental approaches used in hazard assessment. The present review presents an overview of the human-relevant aspects associated with the current micro-and nanoplastic burden. We focus on environmental circulation and the estimation of exposure quantities to humans, along with a state-of-the-art overview of particle accumulation in over 15 human organs and other specimen. Additionally, data regarding particle characteristics used in toxicity testing was extracted from 91 studies and discussed considering their environmental and human relevance.

Development of a solubility parameter calculation-based method as a complementary tool to traditional techniques for indoor dust microplastic determination and risk assessment

Herein, a method based on solubility parameter calculation was first used to analyze microplastics in indoor dust. The limit of quantification (LOQ) reached 0.2 mg/g, and the result of reference material SRM 2585 (n = 3) was 14.8 mg/g ± 1.8 %, suggesting satisfying sensitivity and precision. Recoveries of spiking experiments were > 80 % with no obvious matrix interferences observed, except ethylene propylene diene monomer (EPDM) MPs. Further, 69 indoor dust samples were analyzed to verify the method and to assess exposure scenarios for graduate students in Tianjin, China. EPDM was identified in an indoor environment for the first time as the second most widely detected type after PET in this work. The mass-based result is complementary to the outcomes from thermogravimetric analysis-gas chromatography-mass spectrometry and laser direct infrared imaging. Significant correlations were found between total organic carbon (TOC), microplastics, and BDE-209 concentrations, indicating microplastics important contaminant vectors in indoor dust. Dormitory stays and PET contributed the most to health risks among the three exposure scenarios and detected four polymers, respectively. This work provides an approach with the potential for the standardized determination of microplastics in complex environmental matrices and reveals exposure characteristics of indoor dust microplastics.

Toxicity assessment of microplastic (MPs); a threat to the ecosystem

Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.

Review of microplastics in the indoor environment: Distribution, human exposure and potential health impacts

The emergence of microplastics (MPs) pollution as a global environmental concern has attracted significant attention in the last decade. The majority of the human population spends most of their time indoors, leading to increased exposure to MPs contamination through various sources such as settled dust, air, drinking water and food. Although research on indoor MPs has intensified significantly in recent years, comprehensive reviews on this topic remain limited. Therefore, this review comprehensively analyses the occurrence, distribution, human exposure, potential health impact and mitigation strategies of MPs in the indoor air environment. Specifically, we focus on the risks associated with finer MPs that can translocate into the circulatory system and other organs, emphasizing the need for continued research to develop effective strategies to mitigate the risks associated with MPs exposure. Our findings suggest that indoor MPs impose potential risk to human health, and strategies for mitigating exposure should be further explored.

Quantification of polyethylene terephthalate micro- and nanoplastics in domestic wastewater using a simple three-step method

Concerns about impact of small plastic particles, known as microplastics (<5 mm) and nanoplastics (<1 μm), together abbreviated as MNP, on the environment and on human health have increased in recent years. Polyethylene terephthalate (PET) microplastics have been detected previously in different environmental samples including freshwater and wastewater sludge. In the present study, we target all small plastic particles of PET with a diameter smaller than 5 mm ('PET MNP'). A simple three-step method of drying, (in matrix) PET depolymerization in ethylene glycol and liquid chromatography-mass spectrometry (LC-MS) analysis, was applied for the quantification of PET MNP in influents and effluents collected from ten Dutch wastewater treatment plants. The PET recovery was 98 % in the wastewater matrix. The limits of detection (LOD) for PET in influents and effluents were 2.0 μg/L and 1.2 μg/L, respectively. PET MNP was detected in all the influents (ranging from 24.9 μg/L to 680 μg/L) and most of the effluents (ranging from <LOD to 23.1 μg/L). The results of the present study confirmed that WWTP effluents can be a source of PET MNP in the environment.

Finding the tiny plastic needle in the haystack: how field flow fractionation can help to analyze nanoplastics in food

While the exact health risks associated with nanoplastics are currently the focus of intense research, there is no doubt that humans are exposed to nanoplastics and that food could be a major source of exposure. Nanoplastics are released from plastic materials and articles used during food production, processing, storage, preparation, and serving. They are also likely to enter the food chain via contaminated water, air, and soil. However, very limited exposure data for risk assessment exists so far due to the lack of suitable analytical methods. Nanoplastic detection in food poses a great analytical challenge due to the complexity of plastics and food matrices as well as the small size and expectedly low concentration of the plastic particles. Multidetector field flow fractionation has emerged as a valuable analytical technique for nanoparticle separation over the last decades, and the first studies using the technique for analyzing nanoplastics in complex matrices are emerging. In combination with online detectors and offline analysis, multidetector field flow fractionation is a powerful platform for advanced characterization of nanoplastics in food by reducing sample complexity, which otherwise hampers the full potential of most analytical techniques. The focus of this article is to present the current state of the art of multidetector field flow fractionation for nanoplastic analysis and to discuss future trends and needs aiming at the analysis of nanoplastics in food.

Mass Spectrometry as an Analytical Tool for Detection of Microplastics in the Environment

Plastic particles smaller than 5 mm accumulate in aqueous, terrestrial, and atmospheric environments and their discovery has been a serious concern when it comes to eco-toxicology and human health risk assessment. In the following review, the potential of mass spectrometry (MS) for the detection of microplastic (MP) pollutants has been elaborately reviewed. The use of various mass spectrometric techniques ranging from gas chromatography–mass spectrometry (GC-MS), liquid chromatographic mass spectrometric (LC-MS) to matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS), including their variants, have been reviewed. The lapses in the detection system have been addressed and future recommendations proposed. The challenges facing microplastics and their detection have been discussed and future directions, including mitigation methods, have been presented.

Chromatographic-Based Platforms as New Avenues for Scientific Progress and Sustainability

Chromatography was born approximately one century ago and has undergone outstanding technological improvements in innovation, research, and development since then that has made it fundamental to advances in knowledge at different levels, with a relevant impact on the well-being and health of individuals. Chromatography boosted a comprehensive and deeper understanding of the complexity and diversity of human–environment interactions and systems, how these interactions affect our life, and the several societal challenges we are currently facing, namely those related to the sustainability of our planet and the future generations. From the life sciences, which allowed us to identify endogenous metabolites relevant to disease mechanisms, to the OMICS field, nanotechnology, clinical and forensic analysis, drug discovery, environment, and “foodprint”, among others, the wide range of applications of today’s chromatographic techniques is impressive. This is fueled by a great variability of powerful chromatographic instruments currently available, with very high sensitivity, resolution, and identification capacity, that provide a strong basis for an analytical platform able to support the challenging demands of the postgenomic and post COVID-19 eras. Within this context, this review aims to address the great utility of chromatography in helping to cope with several societal-based challenges, such as the characterization of disease and/or physiological status, and the response to current agri-food industry challenges of food safety and sustainability, or the monitoring of environmental contamination. These are increasingly important challenges considering the climate changes, the tons of food waste produced every day, and the exponential growth of the human population. In this context, the principles governing the separation mechanisms in chromatography as well the different types and chromatographic techniques will be described. In addition, the major achievements and the most important technological advances will be also highlighted. Finally, a set of studies was selected in order to evince the importance of different chromatographic analyses to understand processes or create fundamental information in the response to current societal challenges.

Microplastics and their Additives in the Indoor Environment

Analyses of air and house dust have shown that pollution of the indoor environment with microplastics could pose a fundamental hygienic problem. Indoor microplastics can result from abrasion, microplastic beads are frequently added to household products and microplastic granules can be found in artificial turf for sports activities and in synthetic admixtures in equestrian hall litter. In this context, the question arose as to what extent particulate emissions of thermoplastic materials from 3D printing should be at least partially classified as microplastics or nanoplastics. The discussion about textiles as a possible source of indoor microplastics has also been intensified. This Minireview gives an overview of the current exposure of residents to microplastics. Trends can be identified from the results and preventive measures can be derived if necessary. It is recommended that microplastics and their additives be given greater consideration in indoor environmental surveys in the future.