Rogue one: A plastic story

Improving the behavior of thermoplastic starch with the addition of gum Arabic: Antibacterial, mechanical properties and biodegradability

The incorporation of different amounts of Gum Arabic (GA) in thermoplastic starch (TPS) obtained by extrusion and subsequent thermocompression has been studied. The sheets have been characterized by means of XRD, FTIR, TGA, moisture content, SEM, mechanical properties, antimicrobial activity and biodegradability via composting. The FTIR analysis of the sheets shows the presence of ester groups, while the TGA shows the presence of new processes and a residue much higher than expected is obtained. No changes in crystallinity are observed by XRD. The inclusion of GA confers antimicrobial properties to thermoplastic starch against the Gram + and Gram - bacteria studied even at the smaller concentrations. For a low GA content (0.5 and 1 g GA/100 g TPS) a homogeneous material is observed by SEM, as well as an important increase in tensile strength, modulus and deformation at break, which are very interesting properties facing the applicability of this material in single use plastics which are in contact with food or other consumable goods. At higher contents of GA, hollows and cracks appear in the material, compromising the mechanical properties. In all cases, the inclusion of GA delays the biodegradation process in soil, which can be related to its antibacterial capacity and especially in case of GA concentrations of 2 and 5 g/100 g of TPS with lower humidity of these TPS sheets.

Waste to energy: Trending key challenges and current technologies in waste plastic management

Due to the 'forever' degrading nature of plastic waste, plastic waste management is often complicated. The applications of plastic are ubiquitous and inevitable in many scenarios. Current global waste plastics production is ca. 3.5 MMT per year, and with the current trend, plastic waste production will reach 25,000 MMT by 2040. However, the rapid growth in plastic manufacture and the material's inherent nature resulted in the accumulation of a vast amount of plastic garbage. The current recycling rate is <10 %, while the large volumes of discarded plastic waste cause environmental and ecological problems. Recycling rates for plastic vary widely by region and type of plastic. In some developed countries, the recycling rate for plastics is around 20-30 %, while in many developing nations, it is much lower. These statistics highlight the magnitude of the plastic waste problem and the urgent need for comprehensive strategies to manage plastic waste more effectively and reduce its impact on the environment. This review critically analyses past studies on the essential and efficient techniques for turning plastic trash into treasure. Additionally, an attempt has been made to provide a comprehensive understanding of the plastic upcycling process, the 3Rs policy, and the life-cycle assessment (LCA) of plastic conversion. The review advocates pyrolysis as one of the most promising methods of turning plastic trash into valuable chemicals. In addition, plastic waste management can be severely impacted due to uncontrollable events, such as Covid 19 pandemic. Recycling and chemical upcycling can certainly bring value to the end-of-life plastic. However, the LCA analysis indicated there is still a huge scope for innovation in chemical upcycling area compared to mechanical recycling. The formulation of policies and heightened public participation could play a pivotal role in reducing the environmental repercussions of plastic waste and facilitating a shift towards a more sustainable future.

Oxidative stress and energy metabolic response of Isochrysis galbana induced by different types of pristine and aging microplastics and their leachates

The aging process and leachate composition of different types of MPs (PS, PS-NH2, PS-COOH and PMMA) with a particle size of 1.0 μm were characterized, and marine microalgae Isochrysis galbana OA3011(I. galbana) was used as test organism to investigate the 96 h toxic effects of MPs before and after aging as well as leachate exposure. Except for polymethyl methacrylate (PMMA), all other tested microplastics showed significant aggregation in seawater, which increased with the presence of surface amino and carboxyl groups, in addition, the increase in polymer dispersibility index (PDI) values after aging reflected more severe aggregation. Fourier transform infrared spectrometer (FTIR) showed that the surface amino groups were shed during the aging of PS-NH2, which can likewise be demonstrated by the change in surface electric potential from positive to negative before and after aging. PMMA, due to the addition of plasticizers (HEHP and DIBP detected in high concentration) and its own structure, has stronger resistance to aging than the other three microplastics, and no significant aging phenomenon occurs. As for I. galbana, growth inhibition, oxidative stress and energy metabolism were tested after exposure to different microplastics and their leachate. It was found that high concentrations of A-PS had a greater negative impact on I. galbana, while the toxic effects of PS-NH2 and PS-COOH on I. galbana behaved in a diametrically opposite way before and after aging compared to PS with the inhibitory effect decreasing after aging, which was caused by the shedding of surface groups. As for PMMA, the differences in the toxic effects on microalgae before and after aging were not significant. The inhibitory effect of low concentrations of PAEs (Phthalate acid esters) in the leachate of PS-COOH on I. galbana was not significant, and the stronger inhibitory effect of 4 d L-PS-NH2 was presumed to be the shedding of positively charged groups.

Microplastics in feces and pellets from yellow-legged gull (Larus michahellis) in the Atlantic Islands National Park of Galicia (NW Spain)

The Atlantic Islands National Park (AINP) in Galicia (NW of Spain) are host to large colonies of yellow-legged gulls (Larus michahellis). Here, we aimed to provide baseline data for the presence of microplastics (MP) in feces and pellets regurgitated of these resident yellow-legged gulls within this unique ecosystem. MP particles found in the samples were of five shapes (fiber, fragment, foam, film and rubber) and the predominant color was blue. The main plastic polymers identified by Raman spectroscopy were polypropylene and cellulose. The average size of the MP particles in the regurgitations was larger than that in the feces. Considering the population of Larus michahellis in the AINP, our estimates suggested an annual deposition of approximately 32.2 million of MP particles from feces and regurgitated pellets in the area.

Adaptive 2D and Pseudo-2D Systems: Molecular, Polymeric, and Colloidal Building Blocks for Tailored Complexity

Two-dimensional and pseudo-2D systems come in various forms. Membranes separating protocells from the environment were necessary for life to occur. Later, compartmentalization allowed for the development of more complex cellular structures. Nowadays, 2D materials (e.g., graphene, molybdenum disulfide) are revolutionizing the smart materials industry. Surface engineering allows for novel functionalities, as only a limited number of bulk materials have the desired surface properties. This is realized via physical treatment (e.g., plasma treatment, rubbing), chemical modifications, thin film deposition (using both chemical and physical methods), doping and formulation of composites, or coating. However, artificial systems are usually static. Nature creates dynamic and responsive structures, which facilitates the formation of complex systems. The challenge of nanotechnology, physical chemistry, and materials science is to develop artificial adaptive systems. Dynamic 2D and pseudo-2D designs are needed for future developments of life-like materials and networked chemical systems in which the sequences of the stimuli would control the consecutive stages of the given process. This is crucial to achieving versatility, improved performance, energy efficiency, and sustainability. Here, we review the advancements in studies on adaptive, responsive, dynamic, and out-of-equilibrium 2D and pseudo-2D systems composed of molecules, polymers, and nano/microparticles.

A global synthesis of microplastic contamination in wild fish species: Challenges for conservation, implications for sustainability of wild fish stocks and future directions

Research on the occurrence of microplastics in wild fish populations is a constantly growing area, requiring continuous reviews to properly keep up with the fast pace of publications and guide future work. This review analyses the scientific output of 260 field studies covering 1053 different fish taxa for the presence of microplastics. To date, microplastics have been recorded in 830 wild fish species, including 606 species of interest to commercial and subsistence fisheries. Among these, based on IUCN Red List status, 34 species are globally classified in one of the three threatened categories (Critically Endangered, Endangered or Vulnerable) and another 22 species were assessed as "Near Threatened". Of the species for which the IUCN Red List tracks population trend data, the fish species reported to have microplastics so far include 81 which are recorded as declining, 134 as stable and just 16 as increasing. This review highlights the potential implications of fish microplastic contamination to biodiversity conservation, sustainability of wild fish stocks, and human food safety and security. Finally, recommendations for future research are presented.

Are microplastics contributing to pollution-induced neurotoxicity? A pilot study with wild fish in a real scenario

Pollution-induced neurotoxicity is of high concern. This pilot study investigated the potential relationship between the presence of microplastics (MPs) in the brain of 180 wild fish (Dicentrarchus labrax, Platichthys flesus, Mugil cephalus) from a contaminated estuary and the activity of the acetylcholinesterase (AChE) enzyme. MPs were found in 9 samples (5% of the total), all of them from D. labrax collected in the summer, which represents 45% of the samples of this species collected in that season (20). Seventeen MPs were recovered from brain samples, with sizes ranging from 8 to 96 μm. Polyacrylamide, polyacrylic acid and one biopolymer (zein) were identified by Micro-Raman spectroscopy. Fish with MPs showed lower (p ≤ 0.05) AChE activity than those where MPs were not found. These findings point to the contribution of MPs to the neurotoxicity induced by long-term exposure to pollution, stressing the need of further studies on the topic to increase 'One Health' protection.

Toxic effects of pristine and aged polystyrene and their leachate on marine microalgae Skeletonema costatum

The acute toxic effects of pristine and aged polystyrene (P-PS and A-PS) and their leaching solutions (L-PS) on microalgae Skeletonema costatum were investigated by measuring algal density and growth inhibition rate (IR), chlorophyll concentration and photosynthetic efficiency (Fv/Fm) over 96 h. Total protein (TP), superoxide dismutase (SOD), catalase (CAT) and malondialdehyde (MDA) were measured to analyze the oxidative damage to microalgae by microplastics and their leachates. Hydrodynamic diameter of microplastics in seawater, FITR and SEM images were used to study the changes of polystyrene during aging. The interaction of algae cell with microplastics and the cellular ultrastructure changes of cells were analyzed combined with electron microscopy for a comprehensive and systematic understanding on the mechanisms of microplastic toxicity to microalgae. Both high concentration and small size of PS had significant inhibitory effect on the growth of microalgae, and the inhibitory effect was greater with increasing exposure time. The inhibition effect of aged microplastics was more obvious, which was speculated to be caused by the synergistic effect of aged PS itself and leaching solution. The negative effect of leaching solution on microalgae was due to the release of some additives during the aging process. The content of MDA reached the highest value of 54.41 nmol/mgprot in 1.0 μm 50 mg/L A-PS treatment group, and A-PS were found to be more prone to heterogeneous aggregation with algae cells by SEM.

From natural environment to animal tissues: A review of microplastics(nanoplastics) translocation and hazards studies

Microplastics (MPs) and nanoplastic (NPs) pollution is a global concern due to the massive use of plastic products. Although there have been many studies on the treatments of animals with MPs/NPs, there are few systematic summaries of MPs/NPs translocation and hazards in animals. This review comprehensively summarizes the pathways by which animals are exposed to MPs/NPs in the environment, in particular, to summarize in detail their translocation and hazards in vivo. Studies have shown that MPs/NPs enter the animals' body through water, food, breath and even skin, enter the blood circulation through the lungs and digestive tract, and eventually accumulate in various tissues. After a summary of the studies, we found a high correlation between the tissue accumulation of MPs/NPs and their particle size, with 4-20 μm MPs appearing to be more prone to accumulate in tissues. These MPs/NPs accumulated in animal tissues may be transferred to humans through the food chain. Thus, we summarized the studies on the accumulation of MPs/NPs in livestock and poultry products, showing that MPs/NPs in livestock and poultry products gradually increased with the complexity of processing and packaging processes. There are few reports related to direct contamination of livestock products by MPs/NPs, we hope that this review will bring together the growing body of evidence that MPs/NPs can directly harm human health through the food chain.