Heavy metals and metalloid in aquatic invertebrates: A review of single/mixed forms, combination with other pollutants, and environmental factors

Toxicity of methylmercury in aquatic organisms and interaction with environmental factors and coexisting pollutants: A review

Mercury is a hazardous heavy metal that is distributed worldwide in aquatic ecosystems. Methylmercury (MeHg) poses significant toxicity risks to aquatic organisms, primarily through bioaccumulation and biomagnification, due to its strong affinity for protein thiol groups, which results in negative effects even at low concentrations. MeHg exposure can cause various physiological changes, oxidative stress, neurotoxicity, metabolic disorders, genetic damage, and immunotoxicity. To assess the risks of MeHg contamination in actual aquatic ecosystems, it is important to understand how MeHg interacts with environmental factors such as temperature, pH, dissolved organic matter, salinity, and other pollutants such as microplastics and organic compounds. Complex environmental conditions can cause potential toxicity, such as synergistic, antagonistic, and unchanged effects, of MeHg in aquatic organisms. This review focuses on demonstrating the toxic effects of single MeHg exposure and the interactive relationships between MeHg and surrounding environmental factors or pollutants on aquatic organisms. Our review also recommends further research on biological and molecular responses in aquatic organisms to better understand the potential toxicity of combinational exposure.

Metal bioaccumulation and effects of olivine sand exposure on benthic marine invertebrates

Due to the anthropogenic increase of atmospheric CO2 emissions, humanity is facing the negative effects of rapid global climate change. Both active emission reduction and carbon dioxide removal (CDR) technologies are needed to meet the Paris Agreement and limit global warming to 1.5 °C by 2050. One promising CDR approach is coastal enhanced weathering (CEW), which involves the placement of sand composed of (ultra)mafic minerals like olivine in coastal zones. Although the large-scale placement of olivine sand could beneficially impact the planet through the consumption of atmospheric CO2 and reduction in ocean acidification, it may also have physical and geochemical impacts on benthic communities. The dissolution of olivine can release dissolved constituents such as trace metals that may affect marine organisms. Here we tested acute and chronic responses of marine invertebrates to olivine sand exposure, as well as examined metal accumulation in invertebrate tissue resulting from olivine dissolution. Two different ecotoxicological experiments were performed on a range of benthic marine invertebrates (amphipod, polychaete, bivalve). The first experiment included acute and chronic survival and growth tests (10 and 20 days, respectively) of olivine exposure while the second had longer (28 day) exposures to measure chronic survival and bioaccumulation of trace metals (e.g. Ni, Cr, Co) released during olivine sand dissolution. Across all fauna we observed no negative effects on acute survival or chronic growth resulting solely from olivine exposure. However, over 28 days of exposure, the bent-nosed clam Macoma nasuta experienced reduced burrowing and accumulated 4.2 ± 0.7 μg g ww-1 of Ni while the polychaete Alitta virens accumulated 3.5 ± 0.9 μg g ww-1 of Ni. No significant accumulation of any other metals was observed. Future work should include longer-term laboratory studies as well as CEW field studies to validate these findings under real-world scenarios.

Toxic effects of triclosan in aquatic organisms: A review focusing on single and combined exposure of environmental conditions and pollutants

Triclosan (TCS) is an antibacterial agent commonly used in personal care products. Due to its widespread use and improper disposal, it is also a pervasive contaminant, particularly in aquatic environments. When released into water bodies, TCS can induce deleterious effects on developmental and physiological aspects of aquatic organisms and also interact with environmental stressors such as weather, metals, pharmaceuticals, and microplastics. Multiple studies have described the adverse effects of TCS on aquatic organisms, but few have reported on the interactions between TCS and other environmental conditions and pollutants. Because aquatic environments include a mix of contaminants and natural factors can correlate with contaminants, it is important to understand the toxicological outcomes of combinations of substances. Due to its lipophilic characteristics, TCS can interact with a wide range of substances and environmental stressors in aquatic environments. Here, we identify a need for caution when using TCS by describing not only the effects of exposure to TCS alone on aquatic organisms but also how toxicity changes when it acts in combination with multiple environmental stressors.

Single and combined effects of increased temperature and methylmercury on different stages of the marine rotifer Brachionus plicatilis

Rapid, anthropogenic activity-induced global warming is a severe problem that not only raises water temperatures but also shifts aquatic environments by increasing the bioavailability of heavy metals (HMs), with potentially complicated effects on aquatic organisms, including small aquatic invertebrates. For this paper, we investigated the combined effects of temperature (23 and 28 °C) and methylmercury (MeHg) by measuring physiological changes, bioaccumulation, oxidative stress, antioxidants, and the mitogen-activated protein kinase signaling pathway in the marine rotifer Brachionus plicatilis. High temperature and MeHg adversely affected the survival rate, lifespan, and population of rotifers, and bioaccumulation, oxidative stress, and biochemical reactions depended on the developmental stage, with neonates showing higher susceptibility than adults. These findings demonstrate that increased temperature enhances potentially toxic effects from MeHg, and susceptibility differs with the developmental stage. This study provides a comprehensive understanding of the combined effects of elevated temperature and MeHg on rotifers. ENVIRONMENTAL IMPLICATION: Methylmercury (MeHg) is a widespread and harmful heavy metal that can induce lethal effects on aquatic organisms in even trace amounts. The toxicity of metals can vary depending on various environmental conditions. In particular, rising temperatures are considered a major factor affecting bioavailability and toxicity by changing the sensitivity of organisms. However, there are few studies on the combinational effects of high temperatures and MeHg on aquatic animals, especially invertebrates. Our research would contribute to understanding the actual responses of aquatic organisms to complex aquatic environments.

Enzymatic and transcriptional level changes induced by the co-presence of lead and procymidone in hook snout carp (Opsariichthys bidens)

Understanding the interactions between different environmental pollutants is necessary in ecotoxicology since environmental contaminants never appear as single components but rather in combination with other substances. Heavy metals and pesticides are commonly detected in the environment, but the characterization of their mixture toxicity has been inadequately explored. This research aimed to elucidate the mixture impacts of the heavy metal lead (Pb) and the pesticide procymidone (PCM) on the hook snout carp (Opsariichthys bidens) using an array of biomarkers. The data showed that Pb and PCM possessed almost equivalent acute toxicity to the animals, with 4-days LC50 values of 120.9 and 85.15 mg L-1, respectively. Combinations of Pb and PCM generated acute synergistic effects on O. bidens. The contents of malondialdehyde (MDA), antioxidative (SOD), apoptotic (caspase-9), and detoxifying enzymes glutathione S-transferase (GST) and cytochrome P450 (CYP450) significantly changed after most of the mixture exposures compared with the baseline level and the corresponding individual exposures. This suggests the induction of oxidative stress, cell damage, and detoxification dysfunction. The expressions of eight genes (mn-sod, cu-sod, p53, cas3, erβ1, esr, ap, and klf2α) associated with oxidative stress, cell apoptosis, immune response, and hormonal functions exhibited pronounced changes when challenged with the mixture compared to the individual treatments. This indicates the occurrence of immune dysregulation and endocrine disorder. These findings provide an overall understanding of fish upon the challenge of sublethal toxicity between Pb and PCM and can be adopted to evaluate the complicated toxic mechanisms in aquatic vertebrates when exposed to heavy metal and pesticide mixtures. Additionally, these results might guide environmental regulation tactics to protect the population of aquatic vertebrates in natural ecosystems.

Photocatalytic degradation of drugs and dyes using a maching learning approach

The waste management industry uses an increasing number of mathematical prediction models to accurately forecast the behavior of organic pollutants during catalytic degradation. With the increasing quantity of waste generated, these models are critical for reinforcing the efficiency of wastewater treatment strategies. The application of machine-learning techniques in recent years has notably improved predictive models for waste management, which are essential for mitigating the impact of toxic commercial waste on global water supply. Organic contaminants, dyes, pesticides, surfactants, petroleum by-products, and prescription drugs pose risks to human health. Because traditional techniques face challenges in ensuring water quality, modern strategies are vital. Machine learning has emerged as a valuable tool for predicting the photocatalytic degradation of medicinal drugs and dyes, providing a promising avenue for addressing urgent demands in removing organic pollutants from wastewater. This research investigates the synergistic application of photocatalysis and machine learning for pollutant degradation, showcasing a sustainable solution with promising effects on environmental remediation and computational efficiency. This study contributes to green chemistry by providing a clever framework for addressing present-day water pollution challenges and achieving era-driven answers.

Remediation of biochar-supported effective microorganisms and microplastics on multiple forms of heavy metals in eutrophic lake

In mineral-rich areas, eutrophic lakes are at risk of HMs pollution. However, few papers focused on the repair of HMs in eutrophic environment. Our study analyzed multiple forms of HMs, pore structure and microbial responses in the water-sediment system of eutrophic lake treated with biochar, Effective Microorganisms (EMs) or/and microplastics (MPs). As biochar provided an ideal carrier for EMs, the remediation of biochar-supported EMs (BE) achieved the greatest repairment that improved the bacterial indexes and greatly decreased the most HMs in various forms across the water-sediment system, and it also reduced metal mobility, bioavailability and ecological risk. The addition of aged MPs (MP) stimulated the microbial activity and significantly reduced the HMs levels in different forms due to the adsorption of biofilms/EPS adhered on MPs, but it increased metals mobility and ecological risks. The strong adsorption and high mobility of aged MPs would increase enrichment of HMs and cause serious ecological hazards. The incorporation of BE and MP (MBE) also greatly reduced the HMs in full forms, which was primarily ascribed to the adsorption of superfluous biofilms/EPS, but it distinctly depressed the microbial activity. The single addition of biochar and EMs resulted in the inability of HMs to be adsorbed due to the preferentially adsorption of dissolved nutrients and the absence of effective carrier, respectively. In the remediation cases, the remarkable removal of HMs was principally accomplished by the adsorption of HMs with molecular weight below 100 kDa, especially 3 kDa ∼100 kDa, which had higher specific surfaces and abundant active matters, resulting in higher adsorption onto biofilms/EPS.

Adsorption optimization and modeling of Hg2+ ions from aqueous solutions using response surface methodology by SNPs-CS bionanocomposite produced from rice husk agro-industrial waste as a novel environmentally-friendly bionanoadsorbent

In the present research, extraction of silica (SiO2) from rice husk (RH) was optimized and silica nanoparticles (SNPs) was produced using it and functionalized by chitosan (CS) functional groups to obtain CS functionalized SNPs (SNPs-CS) bionanocomposite for the first time. The physical and chemical characteristics of the produced materials were examined using structural analyses. The results of structural analyses confirmed the fine structure of the produced materials. The SNPs-CS bionanocomposite was applied to effectively remove Hg2+ ions from aqueous solutions as an environmentally-friendly bionanoadsorbent and optimization and modeling of the adsorption conditions was explored using designed experiments by Design-Expert software with central composite design (CCD) and response surface methodology (RSM). Optimum adsorption conditions were obtained as solution pH of 6, SNPs-CS dosage of 0.1 g L-1 and Hg2+ ions concentration of 100 mg L-1 by removal efficiency of 85% and desirability function of 0.876. The results of adsorption kinetic showed a better fit of the pseudo-second-order model with experimental data, indicating the chemisorption of the adsorption process. The better fit of the Langmuir model with experimental data was confirmed by the results of adsorption isotherms, demonstrating monolayer adsorption on the homogeneous surface. The adsorption thermodynamic results illustrated the exothermicity and spontaneity of the adsorption reaction. The results of SNPs-CS recovery depicted its excellent recovery ability of removal efficiency with more than 90% after five consecutive adsorption and desorption cycles, which proved high potential of the produced bionanocomposite for industrial applications.

Individual and combined impact of microplastics and lead acetate on the freshwater shrimp (Caridina fossarum): Biochemical effects and physiological responses

Microplastics and heavy metals pollution is recognised as a major problem affecting aquatic ecosystems. For this reason, this study aims to assess the toxicity of different concentrations of polyethylene microplastics (PE-MPs) (0.0, 500, and 1000 μg L-1) with a mean size of 15-25 μm and lead acetate Pb(C2H3O2)2 (0.0, 2.5, and 5 mg L-1), both individually and in combination, through the exposure of the freshwater grass shrimp, Caridinia fossarum for 15 days, focusing on microplastic interaction with co-occurring contaminants. After being exposed to both contaminants, either individually or in combination, significant alterations in numerous biochemical markers were observed. Specifically, exposure to lead acetate alone resulted in significant changes across ALP, AST, ALT, LDH, GGT, and BChE enzyme activity levels indicating hepatotoxicity and neurotoxicity. Also, Pb exposure led to alterations in total antioxidant capacity, MDA, total lipids, and glycogen contents, signalling the onset of oxidative stress. Exposure to PE-MPs alone led to changes in ALP, LDH, GGT, and BChE enzyme levels, and in MDA, total lipids, and glycogen samples' contents. Remarkably, the study observed increased bioaccumulation of lead acetate in samples treated with the combination, emphasizing the synergistic impact of PE-MPs on the toxicity of lead acetate. This synergy was also evident in AST and ALT enzyme activity levels and MDA contents. This underscores the necessity for measures to address both microplastic pollution and heavy metal contamination, taking into account the synergistic behaviour of MPs in the presence of concurrent contaminants.

The competitive and selective adsorption of heavy metals by struvite in the Pb(II)-Cd(II)-Zn(II) composite system and its environmental significance

The prevalence of struvite and other phosphate minerals in eutrophic environments has a significant effect on the transport and transformation of environmental heavy metals, but their competitive immobilization characteristics and mechanisms for heavy metals remain unclear. Three different sources of struvite (BS, CSHS, and CSS) were obtained respectively by biosynthesis and chemical synthesis with or without humic acid to investigate their competitive immobilization characteristics and mechanism of heavy metals in the Pb(II)-Cd(II)-Zn(II) composite system. The results showed that the immobilization of heavy metals by struvite is physico-chemical adsorption and the affinity (in descending order) is Pb(II) >> Cd(II)/Zn(II). Cd(II) promotes the immobilization of Pb(II)/Zn(II) by BS. The order of the selective strength by struvite for Pb(II) is BS >> CSS ≈ CSHS. The study indicates that the difference between struvite holding heavy metal ions is related to the material composition and heavy metal types, and BS shows best selective immobilization for Pb(II) in the Pb(II)-Cd(II)-Zn(II) composite system. This study provides a theoretical basis for understanding the environmental geochemical role and eco-environmental effects of struvite.

Toxicity of binary-metal mixtures (As, Cd, Cu, Fe, Hg, Pb and Zn) in the euryhaline rotifer Proales similis: Antagonistic and synergistic effects

Data regarding the effects of binary metal mixtures in marine zooplankton are scarce, particularly for rotifers. We examined the toxicity of 21 binary equitoxic mixtures of As, Cd, Cu, Fe, Hg, Pb, and Zn on the euryhaline rotifer Proales similis. The toxic units (TU50) revealed that 20 of these binary mixtures exhibited synergistic effects (TU50 < 1.00). The AsHg mixture showed a strong antagonistic effect (TU50 = 2.39), whereas the HgCu interaction exhibited a significant synergistic effect (TU50 = 0.29) on P. similis. TU50 values were <0.60 in all cases that showed synergism (80 %). Regarding the MIXTOX analysis, 13 binary mixtures presented some level of synergism, while two mixtures presented only additivity. Results emphasize the need for environmental agencies to revise and readjust protection guidelines for marine biota in response to the evident synergistic effects occurring at metal mixtures concentrations below the current permissible limits.

Ecotoxicological, ecophysiological, and mechanistic studies on zinc oxide (ZnO) toxicity in freshwater environment

The world has faced climate change that affects hydrology and thermal systems in the aquatic environment resulting in temperature changes, which directly affect the aquatic ecosystem. Elevated water temperature influences the physico-chemical properties of chemicals in freshwater ecosystems leading to disturbing living organisms. Owing to the industrial revolution, the mass production of zinc oxide (ZnO) has been led to contaminated environments, and therefore, the toxicological effects of ZnO become more concerning under climate change scenarios. A comprehensive understanding of its toxicity influenced by main factors driven by climate change is indispensable. This review summarized the detrimental effects of ZnO with a single ZnO exposure and combined it with key climate change-associated factors in many aspects (i.e., oxidative stress, energy reserves, behavior and life history traits). Moreover, this review tried to point out ZnO kinetic behavior and corresponding mechanisms which pose a problem of observed detrimental effects correlated with the alteration of elevated temperature.

Metal tolerance and biosorption capacities of bacterial strains isolated from an urban watershed

Rapid industrialization and urbanization have led to widespread metal contamination in aquatic ecosystems. This study explores the metal tolerance and biosorption characteristics of four bacterial strains (Serratia sp. L2, Raoultella sp. L30, Klebsiella sp. R3, and Klebsiella sp. R19) isolated from Saint Clair River sediments. These strains effectively removed various metal cations (As3+, Pb2+, Cu2+, Mn2+, Zn2+, Cd2+, Cr6+, and Ni2+) in single and multi-metal solutions. Minimum inhibitory concentration (MIC) assays revealed strain-specific variations in metal tolerance, with L2 and L30 exhibiting higher tolerance. Surprisingly, R3 and R19, despite lower tolerance, demonstrated superior metal removal efficiency, challenging the notion that tolerance dictates removal efficacy. In single-metal solutions, R3 and R19 excelled at extracting various metal ions, while competitive binding in multi-metal solutions hindered removal. However, R3 and R19 retained higher removal efficiencies, possibly due to enhanced flocculation activities facilitating metal-ion contact. Comprehensive Fourier-transform infrared (FTIR) analysis highlighted the strains' metal-binding capabilities, with novel peaks emerging after metal exposure, indicative of extracellular polymeric substance (EPS) production. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) confirmed metal accumulation on bacterial surfaces and within cytoplasmic regions and revealed morphological changes and metal adsorption patterns, emphasizing the strains' ability to adapt to metal stress. Scanning transmission microscopy (STEM) and EDX analysis uncovered metal accumulation within bacterial cells, underscoring the complexity of microbial-metal interactions. This study also confirms that the simultaneous presence of an aqueous solution may cause a mutual inhibition in the adsorption of each metal to the EPS resulting in reduced metal uptake, which emphasizes the need to select specific bacterial strains for a given metal-containing effluent. The differences in metal distribution patterns between Klebsiella sp. R19 and Raoultella sp. L30 suggest species-specific metal accumulation strategies driven by environmental conditions and metal availability. The heavy metal-removing capabilities and the ability to grow over a wide range of metal concentrations of the strains used in this study may offer an advantage to employ these organisms for metal remediation in bioreactors or in situ.

Physiological effects and molecular response in the marine rotifer Brachionus plicatilis after combined exposure to nanoplastics and copper

Because nanoplastics (NPs) can transport pollutants, the absorption of surrounding pollutants into NPs and their effects are important environmental issues. This study shows a combined effect of high concentrations of NPs and copper (Cu) in the marine rotifer Brachionus plicatilis. Co-exposure decreased the growth rate, reproduction, and lifespan. The highest level of NP ingestion was detected in the co-treated group, but the Cu concentration was higher in the Cu single-exposure group. ERK activation played a key role in the downstream cell signaling pathway activated by the interaction of NPs and Cu. The increased sensitivity of B. plicatilis to Cu could be due to the impairment of MXR function caused by a high concentration of NPs, which supports our in vivo experiment results. Our results show that exposure to NPs could induce the dysfunction of several critical molecular responses, weakening resistance to Cu and thereby increasing its physiological toxicity in B. plicatilis.