Photocatalytic degradation of crystal violet dye using sulphur-doped carbon quantum dots

Chemical- and green-precursor-derived carbon dots for photocatalytic degradation of dyes

Rapid industrialization and untreated industrial effluents loaded with toxic and carcinogenic contaminants, especially dyes that discharge into environmental waters, have led to a rise in water pollution, with a substantial adverse impact on marine life and humankind. Photocatalytic techniques are one of the most successful methods that help in degradation and/or removal of such contaminants. In recent years, semiconductor quantum dots are being substituted by carbon dots (CDs) as photocatalysts, due to the ease of formation, cost-effectiveness, possible sustainability and scalability, much lower toxicity, and above all its high capacity to harvest sunlight (UV, visible, and near infrared) through electron transfer that enhances the lifetime of the photogenerated charge carriers. A better understanding between the properties of the CDs and their role in photocatalytic degradation of dyes and contaminants is required for the formation of controllable structures and adjustable outcomes. The focus of this review is on CDs and its composites as photocatalysts obtained from different sustainable green as well as chemical precursors. Apart from the synthesis, characterization, and properties of the CDs, the study also highlights the effect of different parameters on the photocatalytic properties of CDs and their composites for catalytic dye degradation mechanisms in detail. Besides the present research development in the field, potential challenges and future perspectives are also presented.

Neglected negative effect of carbon quantum dots (CQDs) entering the ocean on marine organisms living in different water layers

Carbon quantum dots (CQDs) are well dispersed in water, but their potential risks in the marine environment have not been described. This study characterized CQDs and investigated their biological effects (including growth, photosynthesis and behavioural changes) in three marine organisms living in different water layers (the surface phytoplankton Phaeodactylum tricornutum and zooplankton Artemia salina and the benthic coral Zoanthus sp. at the bottom). The results showed that over 78 % of CQDs were suspended in seawater after 96 h. The biomass and photosynthesis of P. tricornutum were significantly affected, with a maximum reduction of 89.49 % in algal cells. CQDs accumulated in the intestinal tract of A. salina, reducing grazing and filtration rates by up to 71.88 % and 89.46 %, respectively. In contrast, CQD exposure had irreversible effects on the tentacle expansion behaviour of Zoanthus sp. This study helps clarify the environmental effects and ecological risks associated with the release of CQDs into the ocean.

Fabrication of the Ordered Mesoporous nZVI/Zr-Ce-SBA-15 Composites Used for Crystal Violet Removal and Their Optimization Using RSM and ANN–PSO

Crystal violet (CV), a triphenylmethane dye, is widely used in the textile, printing, paper, leather, and cosmetics industries. However, due to its higher chemical stability and lower biodegradability, CV has teratogenic and carcinogenic toxic effects on animals and humans. Therefore, the objective of the present study was to investigate whether or not the as-prepared nZVI supported on an ordered mesoporous Zr-Ce-SBA-15 composite (nZVI/Zr-Ce-SBA-15) had more potential for CV removal from simulated wastewater in comparison with Zr-Ce-SBA-15. Meanwhile, the parameters of CV adsorption onto nZVI/Zr-Ce-SBA-15 composites were optimized by a response surface methodology (RSM) and an artificial neural network combined with particle swarm optimization (ANN–PSO). According to XRD, FTIR, SEM, and TEM, N2 adsorption, and thermogravimetric analyses, nZVI was supported successfully on Zr-Ce-SBA-15 composites, becoming an ordered mesoporous material. The results of RSM indicated that the order of the effects of the four parameters on CV removal was, successively, initial pH, contact time, temperature, and initial CV concentration. ANN–PSO was more suitable, in comparison to RSM, to optimize the experimental parameters for CV removal from simulated wastewater using ordered mesoporous nZVI/Zr-Ce-SBA-15 composites. The optimized removal rate of CV was 93.87% under an initial pH of 3.00, a contact time of 20.00 min, an initial CV concentration of 261.00 mg/L, and a temperature of 45. Pseudo-second-order kinetics can better describe the behavior of CV adsorption onto nZVI/Zr-Ce-SBA-15 composites. The process of CV adsorption onto Zr-Ce-SBA-15 composites was followed by the Langmuir model, and its maximum adsorption capacity was 105 mg/g in 213 K. It was indirectly confirmed that the maximum adsorption capacity of nZVI/Zr-Ce-SBA-15 exceeded this value because the removal efficiency of CV using nZVI/Zr-Ce-SBA-15 was obviously higher than that of using Zr-Ce-SBA-15. The thermodynamics results indicated that CV adsorption onto nZVI/Zr-Ce-SBA-15 was a spontaneous, endothermic, and entropy-driven process. The dissolution of Fe ions and light/dark experiments confirmed nZVI/Zr-Ce-SBA-15 was simultaneously of adsorption and catalysis in the process of CV removal. The effect of removal CV was still maintained in the first four experiments (removal rate > 78%), and our suggestion is that nZVI/Zr-Ce-SBA-15 is a potential adsorbent for CV remediation from wastewater compared to Zr-Ce-SBA-15 and other adsorbents.