Catalytic decomposition of N2O over cobalt based spinel oxides: The role of additives

Nitrous Oxide Adsorption and Decomposition on Zeolites and Zeolite-like Materials

Decomposition of N₂O on modified zeolites, crystalline titanosilicalites, and related amorphous systems is studied by the catalytic and spectroscopic methods. Zinc-containing HZSM-5 zeolites and titanosilicalites with moderate Ti/Si ratios are shown to exhibit a better catalytic performance in N₂O decomposition as compared with conventionally used Cu/HZSM-5 zeolites and amorphous Cu-containing catalysts. Dehydroxylation of the HZSM-5 zeolite by calcination at 1120 K results in an enhancement of the N₂O conversion. The mechanism of the reaction and the role of coordinatively unsaturated cations and Lewis acid sites in N₂O decomposition are discussed on the basis of the spectroscopic data.

In situ DRIFT studies on N2O formation over Cu-functionalized zeolites during ammonia-SCR

The influence of the zeolite framework structure on the formation of N2O during ammonia-SCR of NOx was studied for three different copper-functionalized zeolite samples, namely Cu-SSZ-13 (CHA), Cu-ZSM-5 (MFI), and Cu-BEA (BEA).

Selective catalytic reductive removal of NOx with decreased interference from SO2 and H2O by use of Sm-modified SmxCo0.05-xCe0.05Ti0.9Oy catalysts

This work presents a novel and highly efficient NH₃-SCR catalyst, Sm-modified CoCeTiO_x, synthesized by a simple one-step sol-gel method. The optimum Sm_0.03Co_0.02Ce_0.05Ti_0.9O_x catalyst with a high BET surface area shows more than 90% NO conversion and nearly 100 % N₂ selectivity at 180-440 °C. We investigated the relationship between Sm content and surface reactivity using NH₃-TPD, H₂-TPR, XPS, and in-situ DRIFTS. It demonstrated that the Sm-doping could precisely regulate the acidity and redox ability of the Sm_aCo_0.05-aCe_0.05Ti_0.9O_x catalyst. Sm helped develop paths for fast electron transport, in which a charge transfer bridge was built between the Ce and Co, largely favoring the redox cycle. The nature of the acid sites, NO_x adsorption, and the reactivity of surface adsorption species was characterized via in-situ DRIFTS. Moreover, the addition of Sm weakened the adsorption capacity of SO₂ on the catalyst surface. We found that the electron transfer between SO₂ and the activity sites was hindered on the modified catalyst.

K-doped CeO2-ZrO2 for CO2 thermochemical catalytic splitting

Green syngas production is a sustainable energy-development goal. Thermochemical H₂O/CO₂ splitting is a very promising sustainable technology allowing the production of H₂ and CO with only oxygen as the by-product. CeO₂–ZrO₂ systems are well known thermochemical splitting catalysts, since they combine stability at high temperature with rapid kinetics and redox cyclability. However, redox performances of these materials must be improved to allow their use in large scale plants. K-doped systems show good redox properties and repeatable performances. In this work, we studied the effect of potassium content on the performances of ceria–zirconia for CO₂ splitting. A kinetic model was developed to get insight into the nature of the catalytic sites. Fitting results confirmed the hypothesis about the existence of two types of redox sites in the investigated catalytic systems and their role at different K contents. Moreover, the model was used to predict the influence of key parameters, such as the process conditions.

K-doping enhances redox properties of ceria–zirconia towards thermochemical CO₂ splitting, showing promising performances at about 7 wt% of K.

Two-Stage Catalytic Abatement of N2O Emission in Nitric Acid Plants

Different variants for abatement of N2O emission from nitric acid plants with the use of catalysts developed at Łukasiewicz-INS were analyzed. Activity tests on a pilot scale confirmed the high activity of the studied catalysts. A two-stage catalytic abatement of N2O emission in nitric acid plants was proposed: by high-temperature decomposition in the nitrous gases stream (HT-deN2O) and low-temperature decomposition in the tail gas stream (LT-deN2O). The selection of the optimal variant for abatement of N2O emission depends on the individual characteristics of the nitric acid plant: ammonia oxidation parameters, construction of ammonia oxidation reactor and temperature of the tail gas upstream of the expansion turbine. It was shown that the combination of both deN2O technologies, taking into account their technological constraints (dimensions of the catalyst bed), allows for a greater abatement of N2O emission, than the use of only one technology. This solution may be economically advantageous regarding the high prices of CO2 emission allowances.

Ceria Nanoparticles’ Morphological Effects on the N2O Decomposition Performance of Co3O4/CeO2 Mixed Oxides

Ceria-based oxides have been widely explored recently in the direct decomposition of N2O (deN2O) due to their unique redox/surface properties and lower cost as compared to noble metal-based catalysts. Cobalt oxide dispersed on ceria is among the most active mixed oxides with its efficiency strongly affected by counterpart features, such as particle size and morphology. In this work, the morphological effect of ceria nanostructures (nanorods (ΝR), nanocubes (NC), nanopolyhedra (NP)) on the solid-state properties and the deN2O performance of the Co3O4/CeO2 binary system is investigated. Several characterization methods involving N2 adsorption at −196 °C, X-ray diffraction (XRD), temperature programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (ΤΕΜ) were carried out to disclose structure–property relationships. The results revealed the importance of support morphology on the physicochemical properties and the N2O conversion performance of bare ceria samples, following the order nanorods (NR) > nanopolyhedra (NP) > nanocubes (NC). More importantly, Co3O4 impregnation to different carriers towards the formation of Co3O4/CeO2 mixed oxides greatly enhanced the deN2O performance as compared to bare ceria samples, without, however, affecting the conversion sequence, implying the pivotal role of ceria support. The Co3O4/CeO2 sample with the rod-like morphology exhibited the best deN2O performance (100% N2O conversion at 500 °C) due to its abundance in Co2+ active sites and Ce3+ species in conjunction to its improved reducibility, oxygen kinetics and surface area.

Catalytic decomposition of N2O over Cu–Al–Ox mixed metal oxides

Cu–Al–O_x mixed metal oxides with intended molar ratios of Cu/Al = 85/15, 78/22, 75/25, 60/30, were prepared by thermal decomposition of precursors at 600 °C and tested for the decomposition of nitrous oxide (deN₂O). Techniques such as XRD, ICP-MS, N₂ physisorption, O₂-TPD, H₂-TPR, in situ FT-IR and XAFS were used to characterize the obtained materials. Physico-chemical characterization revealed the formation of mixed metal oxides characterized by different specific surface area and thus, different surface oxygen default sites. The O₂-TPD results gained for Cu–Al–O_x mixed metal oxides conform closely to the catalytic reaction data. In situ FT-IR studies allowed detecting the form of Cu⁺⋯N₂ complexes due to the adsorption of nitrogen, i.e. the product in the reaction between N₂O and copper lattice oxygen. On the other hand, mostly nitrate species and NO were detected but those species were attributed to the residue from catalyst synthesis.

Cu–Al–O_x mixed metal oxides with intended molar ratios of Cu/Al = 85/15, 78/22, 75/25, 60/30, were prepared by thermal decomposition of precursors at 600 °C and tested for the decomposition of nitrous oxide (deN₂O).