Comprehensive study on expeditious conversion of pre-hydrolyzed alginic acid to furfural in Cu(II) biphasic systems using microwaves

One-pot, microwave (MW)-assisted production of furfural from almond-, oil-, and wine-derived co-products through biorefinery-based approaches

This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H2SO4, as opposed to a 37 % yield with AlCl3·6H2O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl3·6H2O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl3·6H2O in contrast to H2SO4, thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles.

Preparation of bright yellow color sodium alginate solution

Sodium alginate (SA) is a marine polysaccharide biomass material that is environmentally friendly and exhibits color-changing properties under certain conditions. In this study, we have discovered sodium alginate solution to be chromogenic under four conditions, namely alkali-chromogenic, thermo-chromogenic, force-chromogenic and photo-chromogenic. Under simple strong alkaline conditions, sodium alginate forms clusters of blue light-absorbing chromogenic aggregates, which exhibit a bright yellow color at a certain size. Under different temperature conditions, SA shows varying shades of yellow, and the color tends to stabilize after 48 h of resting. The aggregates can be dispersed by stirring, which changes SA from yellow to colorless. The yellow color can then be recovered after resting. Additionally, exposure to sunlight can cause the yellow SA to fade, but the color can be restored by reheating. Therefore, the force-chromogenic and photo-chromogenic properties are reversible. This makes it a promising material for use in color-developing and indicating materials. It is expected to become a sodium alginate cluster pigment with broad application prospects in the future.

Recent progress in direct production of furfural from lignocellulosic residues and hemicellulose

Furfural is a vital biomass-derived platform molecule, which can be used to synthesize a wide range of value-added chemicals. Furfural and its derivatives are promising alternatives to conventional petroleum chemicals. However, recent industrial production of furfural existed some thorny problems, including low efficiency, energy waste, and environmental pollution. Therefore, tremendous and continuous efforts have been made by researchers to develop novel furfural production processes with high economic viability, production efficiency, and sustainability. This review summarized the merits and shortcomings of disparate catalytic systems for the synthesis of furfural from biomass and biomass pretreatment hydrolysate on the basis of recently published literature. Furthermore, the suggestions for furfural production research were put forward.

Mini-Review on the Synthesis of Furfural and Levulinic Acid from Lignocellulosic Biomass

Efficient conversion of renewable biomass into value-added chemicals and biofuels is regarded as an alternative route to reduce our high dependence on fossil resources and the associated environmental issues. In this context, biomass-based furfural and levulinic acid (LA) platform chemicals are frequently utilized to synthesize various valuable chemicals and biofuels. In this review, the reaction mechanism and catalytic system developed for the generation of furfural and levulinic acid are summarized and compared. Special efforts are focused on the different catalytic systems for the synthesis of furfural and levulinic acid. The corresponding challenges and outlooks are also observed.

One-pot conversion of alginic acid into furfural using Amberlyst-15 as a solid acid catalyst in γ-butyrolactone/water co-solvent system

One-pot conversion of alginic acid, which was derived from brown algae, to furfural was investigated using various solid acid catalysts. Among the solid acid catalysts tested, Amberlyst-15 showed the highest activity in furfural production in aqueous media. When the effect of reaction media was examined by applying various organic solvent mixtures, it was found that γ-butyrolactone/water co-solvent system was selected as the most appropriate system for the reaction. Maximum furfural yield of 32.2% was obtained using Amberlyst-15 in the γ-butyrolactone/H₂O at 210 °C for 20 min. Catalyst showed gradual deactivation behavior as the reaction proceeded, although the catalyst recovered its activity upon the simple treatment with sulfuric acid. N₂ adsorption-desorption experiments, Fourier-transform infrared spectroscopy (FT-IR), back titration, and CHNS analysis were applied to investigate the physicochemical property of post-reaction samples, confirming that the leaching of the active sulfonic acid group and decrease in acid density was the major cause of deactivation.

Reactive Extraction Enhanced by Synergic Microwave Heating: Furfural Yield Boost in Biphasic Systems

Reactive extraction is an emerging operation in the industry, particularly in biorefining. Here, reactive extraction was demonstrated, enhanced by microwave irradiation to selectively heat the reactive phase (for efficient reaction) without unduly heating the extractive phase (for efficient extraction). These conditions aimed at maximizing the asymmetries in dielectric constants and volumes of the reaction and extraction phases, which resulted in an asymmetric thermal response of the two phases. The efficiency improvement was demonstrated by dehydrating xylose (5 wt % in water) to furfural with an optimal yield of approximately 80 mol % compared with 60-65 mol % under conventional biphasic conditions, which corresponds to approximately 50 % reduction of byproducts.

Microwave-Assisted Furfural Production Using Hectorites and Fluorohectorites as Catalysts

It has previously been reported that the use of microwave heating, together with the presence of co-solvents, improves the efficiency of furfural production from biomass. Solid acid catalysts can be a good alternative to mineral acids, since they can prevent corrosion and can be reused. However, the formation of humines should be minimized. Several delaminated and fluorinated hectorites, with different types and strengths of acid sites, were synthesized and tested as catalysts for the production of furfural from commercial xylose and from an acid biomass extract of almond shells. A new methodology was developed to prepare crystalline fluorohectorite at 800 °C in just 3 h. The presence of F significantly increased the acidity strength in the protonated fluorohectorite (H-FH) taking into account its high ammonia desorption temperature (721 °C). Additionally, this sample had fourteen times higher total acidity by m2 than the reference H-βeta acid catalyst. H-FH was the most efficient catalyst at short reaction times (1 h) for the transformation of xylose to furfural under microwaves using toluene as co-solvent, regardless of whether the xylose was commercial (20% furfural yield) or an extract of almond shells (60% furfural yield). However, the acidity of the extract affected the fluorohectorite structure and composition.

Recent Advances in the Microwave-Assisted Production of Hydroxymethylfurfural by Hydrolysis of Cellulose Derivatives-A Review

The concepts of sustainable development, bioeconomy, and circular economy are being increasingly applied for the synthesis of molecules of industrial interest. Among these molecules, hydroxymethylfurfural as a platform molecule is the subject of various research approaches to improve its synthesis and productivity, and extend its potential uses. Accordingly, this review paper aims essentially at outlining recent breakthroughs obtained in the field of hydroxymethylfurfural production from sugars and polysaccharide feedstocks under microwave-assisted technology. The review discusses advances obtained via microwave activation in major production pathways recently explored, split into the following categories: (i) use of various homogeneous catalysts like mineral or organic acids, metal salts, or ionic liquids; (ii) feedstock dehydration making use of various solid acid catalysts; and (iii) non-catalytic routes.

Hydrolysis of Hemicellulose and Derivatives-A Review of Recent Advances in the Production of Furfural

Biobased production of furfural has been known for decades. Nevertheless, bioeconomy and circular economy concepts is much more recent and has motivated a regain of interest of dedicated research to improve production modes and expand potential uses. Accordingly, this review paper aims essentially at outlining recent breakthroughs obtained in the field of furfural production from sugars and polysaccharides feedstocks. The review discusses advances obtained in major production pathways recently explored splitting in the following categories: (i) non-catalytic routes like use of critical solvents or hot water pretreatment, (ii) use of various homogeneous catalysts like mineral or organic acids, metal salts or ionic liquids, (iii) feedstock dehydration making use of various solid acid catalysts; (iv) feedstock dehydration making use of supported catalysts, (v) other heterogeneous catalytic routes. The paper also briefly overviews current understanding of furfural chemical synthesis and its underpinning mechanism as well as safety issues pertaining to the substance. Eventually, some remaining research topics are put in perspective for further optimization of biobased furfural production.