Modification of Cu2+ into Zr-based metal–organic framework (MOF) with carboxylic units as an efficient heterogeneous catalyst for aerobic epoxidation of olefins

Dual-Ligand Strategy for the Design and Construction of a Cd-Zn Heterometallic Metal-Organic Framework by One-Pot Synthesis as a Heterogeneous Catalyst for the Epoxidation Reaction of Olefins

The use of metal-organic frameworks (MOFs) as catalysts is reported in various industrial applications. In contrast to monometallic MOFs, heterometallic MOFs with mixed organic ligands showed enhanced catalytic properties. The catalytic properties of heterometallic MOFs can be enhanced by generating defects and the synergistic effect between the two heterometals at secondary building units. By using a solvothermal technique, a Cd-Zn heterometallic MOF with a new morphology, [Cd2Zn(DPTTZ)0.5(OBA)3(H2O)(HCOOH)] (IUST-4) [DPTTZ = 2,5-di(4-pyridyl)thiazolo[5,4-d]thiazole, OBA = 4,4'-oxybis(benzoic acid)], was synthesized via a mixed-ligand strategy and characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. X-ray crystallographic analysis showed that IUST-4 is a neutral 3D metal-organic framework crystallized in the monoclinic system with space group C2/c. In this study, the catalytic properties of IUST-4 for the epoxidation of cyclooctene were investigated. IUST-4 was selected as the optimal catalyst for epoxy product production due to its high selectivity and yield. Moreover, the catalytic performance of IUST-4 was maintained despite five recycling cycles without significant degradation. The epoxidation of cyclooctene with IUST-4 has several advantages, including good selectivity, easy recovery, and short-time reaction.

Synthesis of UiO-66-Sal-Cu(OH)2 by a Simple and Novel Method: MOF-Based Metal Thin Film as a Heterogeneous Catalyst for Olefin Oxidation

Metal-organic frameworks (MOFs), particularly UiO-66-NH₂, are employed as a catalyst in many industrial catalyst applications. As converting catalysts into thin film significantly increases their catalytic properties for the epoxidation of olefins, we report a general approach to synthesizing MOF thin films (UiO-66-Sal-Cu(OH)₂). Using the postsynthesis method (PSM), UiO-66-NH₂ was functionalized with salicylaldehyde and entrapped on copper hydroxide nanoparticle surfaces using a modern strategy (MOF thin film). We used field-emission scanning electron microscopy (FE-SEM), EDX (energy-dispersive X-ray analysis), XRD (X-ray diffraction), FT-IR (Fourier transform infrared), BET (Brunauer-Emmett-Teller), TGA (thermogravimetric analysis), XPS (X-ray photoelectron spectroscopy), and ICP-MS (inductively coupled plasma mass spectrometry) to determine the structure and morphology of the synthesized UiO-66-Sal-Cu(OH)₂. The oxidation of cyclooctene by the UiO-66-Sal-Cu(OH)₂ thin film was studied. Due to its advantages, such as being environmentally friendly (base metal-loaded catalyst, room temperature, solvent-free reaction), reusability, and high yield, this compound can be an appropriate catalyst for the oxidation of olefins.

A Review on Metal-Organic Frameworks as Congenial Heterogeneous Catalysts for Potential Organic Transformations

Metal-organic frameworks (MOFs) have emerged as versatile candidates of interest in heterogeneous catalysis. Recent research and developments with MOFs positively endorse their role as catalysts in generating invaluable organic compounds. To harness the full potential of MOFs in value-added organic transformation, a comprehensive look at how these materials are likely to involve in the catalytic processes is essential. Mainstays of MOFs such as metal nodes, linkers, encapsulation materials, and enveloped structures tend to produce capable catalytic active sites that offer solutions to reduce human efforts in developing new organic reactions. The main advantages of choosing MOFs as reusable catalysts are the flexible and robust skeleton, regular porosity, high pore volume, and accessible synthesis accompanied with cost-effectiveness. As hosts for active metals, sole MOFs, modified MOFs, and MOFs have made remarkable advances as solid catalysts. The extensive exploration of the MOFs possibly led to their fast adoption in fabricating new biological molecules such as pyridines, quinolines, quinazolinones, imines, and their derivatives. This review covers the varied MOFs and their catalytic properties in facilitating the selective formation of the product organic moieties and interprets MOF’s property responsible for their elegant performance.

Metal Organic Frameworks as Heterogeneous Catalysts in Olefin Epoxidation and Carbon Dioxide Cycloaddition

Metal–organic frameworks (MOFs) are a family of porous crystalline materials that serve in some cases as versatile platforms for catalysis. In this review, we overview the recent developments about the use of these species as heterogeneous catalysts in olefin epoxidation and carbon dioxide cycloaddition. We report the most important results obtained in this field relating them to the presence of specific organic linkers, metal nodes or clusters and mixed-metal species. Recent advances obtained with MOF nanocomposites were also described. Finally we compare the results and summarize the major insights in specific Tables, outlining the major challenges for this emerging field. This work could promote new research aimed at producing coordination polymers and MOFs able to catalyse a broader range of CO2 consuming reactions.

Microwave-Assisted Air Epoxidation of Mixed Biolefins over a Spherical Bimetal ZnCo-MOF Catalyst

Here, we report the synthesis of spherical bimetal ZnCo-MOF materials by a hydrothermal rotacrystallization method and their catalytic activity on the air epoxidation of mixed biolefins enhanced by microwaves. The structural and chemical properties of the ZnCo-MOF materials were fully characterized by XRD, IR, SEM, TG, XPS, and NH₃-TPD. The morphology of the material exhibited a three-dimensional spherical structure. From an NH₃-TPD test of the ZnCo-MOF catalyst, it could be concluded that the Zn_0.1Co₁-MOF-H-150 rpm material had the highest acidic content and the strongest acidity among the catalysts synthesized by different methods, which gave the best performance in the epoxidation of mixed biolefins. The air epoxidation reaction was carried out under atmospheric pressure and microwave conditions, in the absence of any initiator or coreducing agent. Moreover, the Zn_0.1Co₁-MOF catalyst could be recycled six times without reducing the catalytic activity significantly, which showed the stability of spherical catalyst material under microwaves.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

A recyclable cobalt(iii)–ammonia complex catalyst for catalytic epoxidation of olefins with air as the oxidant

A recyclable [Co(NH₃)₆]Cl₃ complex was synthesized to catalyze the epoxidation of α-pinene. With air as the oxidant, [Co(NH₃)₆]Cl₃ obtained 97.4% conversion of α-pinene and 98.3% selectivity of epoxide.

Unique and efficient adsorbents for highly selective and reverse adsorption and separation of dyes via the introduction of SO3H functional groups into a metal–organic framework

In this study, an unsaturated Cu-based MOF, HKUST (Cu₃(BTC)₂), was fabricated and modified with sulfonate groups in two steps, leading to the construction of a novel sulfo-functionalized MOF. The prepared framework was utilized in the adsorption and separation of various organic dyes (MB, Er, FS, and MV). The adsorption process represented intriguing features due to the introduction of the SO₃H functional groups into the framework. Such an attractive feature has rarely been depicted in previous works. In addition to the substantially increased adsorption capacity of the modified framework compared with that of pristine MOF, a reverse and selective phenomenon was perceived in the cases of FS and MV. The sulfo-functionalized MOF could adsorb MV with high adsorption capacity but barely adsorbed FS, and the opposite condition was observed for pristine MOF. In addition, the prepared framework showed high selectivity in a mixed solution of dyes. On the other hand, the modified framework had no role in the first step of the adsorption and separation process and showed the same behavior as pristine MOF. Furthermore, the sulfonate functional groups could not be directly incorporated into HKUST. The experimental data followed the pseudo-second-order kinetics and the Langmuir isotherm model. Thermodynamic studies demonstrated an exothermic spontaneous mechanism for the dye adsorption process. The prepared adsorbents were capable of being recycled for four sequential cycles. Hereupon, this study presents a notably efficacious approach for the reverse performance of frameworks for the dye adsorption and separation process.

A novel sulfo-functionalized MOF was utilized as an efficient adsorbent for a reversal in the removal and selective separation of dyes from contaminated water.

Growth of Cu-BTC MOFs on dendrimer-like porous silica nanospheres for the catalytic aerobic epoxidation of olefins

DPSNs@Cu-BTC was achieved using dendrimer-like porous silica nanoparticles as a support and as an efficient catalyst for olefin epoxidation.

An efficient Nozaki-Hiyama allenylation promoted by the acid derived MIL-101 MOF

A concise synthesis of the sulfonic acid-containing MIL-101 MOF catalyst was reported using commercially available materials. A series of characterization of as-synthesized MIL-101-SO3H including SEM, XRD, FTIR, BET and TGA was also demonstrated. Using MIL-101-SO3H as a catalyst, an efficient Nozaki-Hiyama allenylation reaction was achieved to generate various polyfunctionalized α-allenic alcohols in high yield and good selectivity. Taking advantage of the high acidity of the MIL-101-SO3H MOF structure, such transformations were also achieved under mild reaction conditions and short reaction times. Based on our observed evidence during this study, a mechanism was proposed involving a substrate activation/γ-nucleophilic addition reaction sequence. In addition, the MIL-101-SO3H catalyst can be recycled ten times during the Nozaki-Hiyama allenylation reaction without compromising the yield and selectivity.

Recent Progress in Application of Molybdenum-Based Catalysts for Epoxidation of Alkenes

Epoxides are important industrial intermediates applied in a variety of industrial processes. During the production of epoxides, catalysts have played an irreplaceable and unique role. In this review, the historic progress of molybdenum-based catalysts in alkene epoxidation are covered and an outlook on future challenge discussed. Efficient catalysts are demonstrated including soluble molybdenum complexes, polyoxometalates catalysts, molybdenum-containing metal organic frameworks, silica supported molybdenum-based catalysts, polymer supported molybdenum-based catalysts, magnetic molybdenum-based catalysts, hierarchical molybdenum-based catalysts, graphene-based molybdenum containing catalysts, photocatalyzed epoxidation catalysts, and some other systems. The effects of different solvents and oxidants are discussed and the mechanisms of epoxidation are summarized. The challenges and perspectives to further enhance the catalytic performances in alkenes epoxidation are presented.

Recent Development of pH-Responsive Polymers for Cancer Nanomedicine

Cancer remains a leading cause of death worldwide with more than 10 million new cases every year. Tumor-targeted nanomedicines have shown substantial improvements of the therapeutic index of anticancer agents, addressing the deficiencies of conventional chemotherapy, and have had a tremendous growth over past several decades. Due to the pathophysiological characteristics that almost all tumor tissues have lower pH in comparison to normal healthy tissues, among various tumor-targeted nanomaterials, pH-responsive polymeric materials have been one of the most prevalent approaches for cancer diagnosis and treatment. In this review, we summarized the types of pH-responsive polymers, describing their chemical structures and pH-response mechanisms; we illustrated the structure-property relationships of pH-responsive polymers and introduced the approaches to regulating their pH-responsive behaviors; we also highlighted the most representative applications of pH-responsive polymers in cancer imaging and therapy. This review article aims to provide general guidelines for the rational design of more effective pH-responsive nanomaterials for cancer diagnosis and treatment.

HKUST-1 Supported on Zirconium Phosphate as an Efficient Catalyst for Solvent Free Oxidation of Cyclohexene: DFT Study

Layer by layer metal-organic framework (MOF) supported on zirconium phosphate (ZrP) was synthesized at very mild conditions and used for the liquid phase oxidation of cyclohexene in solvent free condition in the presence of molecular oxygen. The MOF-ZrP was characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), thermal gravimetric analyzer (TGA), Fourier-transform infrared spectrometer (FT-IR) and Brunauer-Emmett-Teller (BET) surface area analyzer. The characterization shows a smooth morphology of MOF-ZrP with good stability under 200 °C having surface area 285 m2/g. The catalytic activity of the MOF-ZrP revealed that increase of layers of MOF on ZrP enhances conversion, as well as selectivity of oxidation of cyclohexene. DFT studies were used to explore the structure and electron properties of HKUST-1 (Hong Kong University of Science and Technology), which is a clue for the catalytic behavior of the catalyst.

A Perspective on Reversibility in Controlled Polymerization Systems: Recent Progress and New Opportunities

The field of controlled polymerization is growing and evolving at unprecedented rates, facilitating polymer scientists to engineer the structure and property of polymer materials for a variety of applications. However, the lack of degradability, particularly in vinyl polymers, is a general concern not only for environmental sustainability, but also for biomedical applications. In recent years, there has been a significant effort to develop reversible polymerization approaches in those well-established controlled polymerization systems. Reversible polymerization typically involves two steps, including (i) forward polymerization, which converts small monomers into macromolecule; and (ii) depolymerization, which is capable of regenerating original monomers. Furthermore, recycled monomers can be repolymerized into new polymers. In this perspective, we highlight recent developments of reversible polymerization in those controlled polymerization systems and offer insight into the promise and utility of reversible polymerization systems. More importantly, the current challenges and future directions to solve those problems are discussed. We hope this perspective can serve as an "initiator" to promote continuing innovations in this fairly new area.