Hydrotalcite-derived Co-MgAlO mixed metal oxides as efficient and stable catalyst for the solvent-free selective oxidation of cyclohexane with molecular oxygen

Efficient and Selective Oxygenation of Cycloalkanes and Alkyl Aromatics with Oxygen through Synergistic Catalysis of Bimetallic Active Centers in Two-Dimensional Metal-Organic Frameworks Based on Metalloporphyrins

Confined catalytic realms and synergistic catalysis sites were constructed using bimetallic active centers in two-dimensional metal-organic frameworks (MOFs) to achieve highly selective oxygenation of cycloalkanes and alkyl aromatics with oxygen towards partly oxygenated products. Every necessary characterization was carried out for all the two-dimensional MOFs. The selective oxygenation of cycloalkanes and alkyl aromatics with oxygen was accomplished with exceptional catalytic performance using two-dimensional MOF Co-TCPPNi as a catalyst. Employing Co-TCPPNi as a catalyst, both the conversion and selectivity were improved for all the hydrocarbons investigated. Less disordered autoxidation at mild conditions, inhibited free-radical diffusion by confined catalytic realms, and synergistic C-H bond oxygenation catalyzed by second metal center Ni employing oxygenation intermediate R-OOH as oxidant were the factors for the satisfying result of Co-TCPPNi as a catalyst. When homogeneous metalloporphyrin T(4-COOCH3)PPCo was replaced by Co-TCPPNi, the conversion in cyclohexane oxygenation was enhanced from 4.4% to 5.6%, and the selectivity of partly oxygenated products increased from 85.4% to 92.9%. The synergistic catalytic mechanisms were studied using EPR research, and a catalysis model was obtained for the oxygenation of C-H bonds with O2. This research offered a novel and essential reference for both the efficient and selective oxygenation of C-H bonds and other key chemical reactions involving free radicals.

Fabrication and Characterization of Cu Nanoparticles Dispersed on ZnAl-Layered Double Hydroxide Nanocatalysts for the Oxidation of Cyclohexane

In the chemical industry, designing high-performance catalysts for the oxidation of cyclohexane into value-added products such as cyclohexanol and cyclohexanone (the combination is known as KA oil) is critical. The catalytic activity of copper nanoparticles supported on layered double hydroxide (LDH) for the liquid phase oxidation of cyclohexane was examined in this study. In this work, we have developed Cu nanoparticles supported on layered double hydroxide nanocatalysts, abbreviated as CuNPs@LDH, by the chemical reduction approach. Various physical methods were used to characterize the resulting material, including ICP-AES, XRD, FTIR, SEM, EDX, HRTEM, and BET surface area. The catalytic activity of copper nanoparticles supported on LDH was examined for the liquid phase oxidation of cyclohexane with tert-butyl hydroperoxide. CuNPs@LDH nanocatalysts with an excellent 52.3% conversion of cyclohexane with 97.2% selectivity of KA oil was obtained after 6 h at 353 K. The hot filtration test further indicated that CuNPs@LDH was a heterogeneous catalyst that could be recycled at least six times without suffering a substantial reduction in its catalytic activity.

Solvent-free liquid-phase selective catalytic oxidation of toluene to benzyl alcohol and benzaldehyde over CeO2–MnOx composite oxides

A novel CeO2–MnOx composite oxide was prepared by the improved sol–gel method. The synergistic catalysis of Mn3+/Mn2+ and Ce4+/Ce3+ was responsible for the good catalytic performance in the liquid phase solvent-free selective oxidation of toluene.

A comprehensive and updated review of studies on the oxidation of cyclohexane to produce ketone-alcohol (KA) oil

Oxidation of cyclohexane is an essential chemical reaction for the industrial manufacture of cyclohexanol and cyclohexanone. These two compounds, together known as ketone–alcohol (KA) oil, are the main feedstock for nylon 6 and nylon 6,6 productions. Several types of catalysts and reaction conditions have been used for cyclohexane oxidation. This paper presents a thorough literature review of catalytic materials used for cyclohexane oxidation to produce KA oil using oxygen, air and other oxidizing agents as well as utilizing different solvents. This review covers research and development reported over the years 2014–2020. This review aims to comprehend the type of catalysts, solvents, oxidants and other reaction parameters used for the oxidation of cyclohexane. Three types of cyclohexane oxidation processes namely thermocatalytic, photocatalytic and microwave-assisted catalytic have been reported. The results of the review showed that metal and metal oxide loaded silica catalysts performed excellently and provided high selectivity of KA oil and cyclohexane conversion. The use of peroxides is not feasible due to their high price compared to air and oxygen. Gold nanoparticles supported on silica performed with high selectivity and good conversion. The use of hydrochloric acid as an additive was found very effective to enhance the photocatalytic oxidation of cyclohexane. Water on the catalyst surface enhanced the reactivity of the photocatalysts since it helps in the generation of hydroxyl radicals.

Catalytic oxidation of cycloalkanes by porphyrin cobalt(II) through efficient utilization of oxidation intermediates

The catalytic oxidation of cycloalkanes using molecular oxygen employing porphyrin cobalt(II) as catalyst was enhanced through use of cycloalkyl hydroperoxides, which are the primary intermediates in oxidation of cycloalkanes, as additional oxidants to further oxidize cycloalkanes in the presence of porphyrin copper(II), especially for cyclohexane, for which the selectivity was enhanced from 88.6 to 97.2% to the KA oil; at the same time, the conversion of cyclohexane was enhanced from 3.88 to 4.41%. The enhanced efficiency and selectivity were mainly attributed to the avoided autoxidation of cycloalkanes and efficient utilization of oxidation intermediate cycloalkyl hydroperoxides as additional oxidants instead of conventional thermal decomposition. In addition to cyclohexane, the protocol presented in this research is also very applicable in the oxidation of other cycloalkanes such as cyclooctane, cycloheptane and cyclopentane, and can serve as a applicable and efficient strategy to boost the conversion and selectivity simultaneously in oxidation of alkanes. This work also is a very important reference for the extensive application of metalloporphyrins in catalysis chemistry.

Selective Cl-Decoration on Nanocrystal Facets of Hematite for High-Efficiency Catalytic Oxidation of Cyclohexane: Identification of the Newly Formed Cl-O as Active Sites

Understanding the structure-reactivity relationship at the atomic scale is of great theoretical importance for rational design of highly active catalysts, which has long been a central concern in catalysis communities and interface science. Herein, we developed a high-efficiency catalyst for catalytic oxidation of C₆H₁₂ by poststructural decoration on well-defined single-crystal facets of hematite. Especially for Cl-decorated {012} facets, the conversion and KA oil selectivity are improved about 3.4 times and 2 times, respectively. A better catalytic performance of the newly formed active site is derived from the charge difference between Cl and the neighboring outmost O atoms, which is affected by the geometric and electronic structures of the original catalyst surface. Based on the experimental results and the theoretical analysis, we concluded that the contribution of various O terminations to Cl-decoration follows the order O(I) > O(III) > O(II). Cl-decorated {001} facets show the highest intrinsic activity, whereas Cl-decorated {012} facets show the best catalytic performance because of their more active sites for Cl-decoration.

A 3D-honeycomb-like catalyst: a nitrogen-doped carbon material with cobalt and manganese-oxide for C–H bond oxidation

A three dimensional mesoporous honeycomb-like material that is multifunctional and easily recoverable, and shows efficient performance is described.