Recent progresses in graphene-based (photo)catalysts for reduction of nitro compounds

Porous Pd-Loaded IRMOF-9 as Highly Efficient Recyclable Material Towards the Reduction of Nitroaromatics in Aqueous Media

Nitroaromatic compounds (NACs) cause severe hazardous impacts on human health as well as on the environment. Therefore, there is dire need to develop a robust material to reduce the toxicity of these organic pollutants. In this regard, our group developed a series of porous MOF materials viz., Pdx@IRMOF-9 (x=2 %, 5 % and 10 %) by loading different concentration of Pd(II) on IRMOF-9 and explored them towards reduction of different nitroaromatic compounds. Pd10%@IRMOF-9showed ~30 % greater efficiency for the reduction of 4-NP as compared to Pd2%@IRMOF-9. Pd10%@IRMOF-9showed excellent reduction ability (>85 %) towards 4-NP, 2-NP, 2-NA, 3-NA and 2,4-DNPH. The kinetic studies indicates that the reduction follows the pseudo-first-order kinetics. Moreover, the rate constant value for reduction of 3-NA was ~9 times higher than that of 2-NP. Based on the kinetic parameters, the t1/2 values for all the nitroaromatics have been calculated. The kinetic parameters, Km and Vmax have been calculated from double reciprocal Lineweaver-Burk plot and found to be 65.984 μM and 116×10-6 Mmin-1 respectively. Pd10%@IRMOF-9showed excellent recyclability towards the reduction of 4-NP for few consecutive cycles without any remarkable loss in its activity. Thus, highly efficient, porous and robust material for the reduction of nitroaromatic compounds in aqueous media have been demonstrated.

Catalytic system having an organotellurium ligand on graphene oxide: immobilization of Pd(0) nanoparticles and application in heterogeneous catalysis of cross-coupling reactions

First heterogeneous catalytic system, having a covalently linked hybrid bidentate organotellurium ligand [i.e., PhTe-CH2-CH2-NH2] on the surface of graphene oxide, has been synthesized with immobilized and stabilized Pd(0) nanoparticles. To the best of our knowledge, it is the first such catalytic system in which a heterogenized organotellurium ligand has been used. It has been well-characterized using different physicochemical characterization techniques viz. P-XRD, XPS, HR-TEM, EELS, FE-SEM, EDX, TGA, BET surface area analysis, FT-IR spectroscopy, and Raman spectroscopy. The Pd content of the final system has been quantified using ICP-OES. Its applications have been explored in Suzuki-Miyaura C-C cross coupling and C-O cross coupling reactions. Hot filtration experiments corroborate the heterogeneous nature of the catalysis. It is recyclable for up to five reaction cycles in Suzuki-Miyaura and C-O cross coupling with marginal loss in performance. It also catalyzes the reactions of chloroarenes such as chlorobenzene, 4-chloroaniline, 1-chloro-4-nitrobenzene, 4-chloroacetophenone, 4-chlorobenzophenone for Suzuki coupling, and 1-chloro-4-nitrobenzene, 4-chlorobenzonitrile, chlorobenzene, and 4-chlorotoluene for C-O coupling. P-XRD, FE-SEM, and EDX study reveals that the catalytic system retains its structural originality and functionality after recycling.

Green approach for the fabrication of a ternary nanocatalyst (Ag-ZnONPs@Cy) for visible light-induced photocatalytic reduction of nitroarenes to aminoarenes

In recent times, the incorporation of metal oxide nanoparticles with organic dyes has piqued the interest of numerous researchers due to their diverse applications under visible light instead of UV radiation. This investigation employed a three-step methodology to fabricate cyanidin-sensitized silver-doped zinc oxide nanoparticles (Ag-ZnO@Cy). Initially, cyanidin dye was extracted from fresh black mulberry fruit, followed by the eco-friendly synthesis of Ag-ZnO nanoparticles (Ag-ZnONPs). The successful integration of the prepared cyanidin dye with Ag-ZnONPs was achieved through a straightforward, environmentally benign, and cost-efficient procedure. The resultant ternary composite underwent comprehensive characterization and confirmation utilizing various techniques, such as SEM, FT-IR, EDX, DRS, elemental mapping, and XRD. The experimental results for Ag-ZnONPs@Cy demonstrated that the nanocrystalline wurtzite exhibited spherical shapes with an average crystal size of 27.42 nm. Moreover, the photocatalytic activity of the synthesized Ag-ZnONPs@Cy was meticulously investigated under blue LED light irradiation. This inquiry encompassed examinations of catalyst amount, regeneration, stability, reusability, and the influence of light source on the hydrogenation of nitroarenes to the corresponding aminoarenes. The findings shed light on the potential of this composite for diverse photocatalytic applications.

Insight into the 4-nitrophenol reduction, supercapacitive behavior, and antimicrobial activity of ZnCo2O4-rGO nanocomposite fabricated by the simple reflux method

In this article, binary oxide ZnCo2O4 nanoparticles (NPs) have been developed on reduced graphene oxide surface by simple reflux condensation method. The physicochemical characteristics of the synthesized nanocomposite were computed using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and UV-Visible spectroscopy. The average size of ZnCo2O4 NPs is found to be about 9 nm. The synthesized nanocomposite was found to be an extremely efficient catalyst for reduction of 4-nitrophenol (4-NP) to produce 4-aminophenol (4-AP) and it is exhibited that about 98% 4-nitrophenol can be reduced in only 20 min. The nanocomposite behaves as supercapacitor due to possessing the specific capacitance value up to 609 F/g and excellent capacitance retention over 1000 cycles. The Brunauer-Emmett-Teller (BET) surface area analysis has been conducted to evaluate surface area and pore size of the synthesized material. The antimicrobial activity of this nanocomposite was performed against bacterial strains of Escherichia coli (E. coli), Bacillus subtilis (B. subtilis), and Staphylococcus aureus (S. aureus) and it is noticed to be a good antimicrobial agent against different bacterial strains.

Tailored photoenzymatic systems for selective reduction of aliphatic and aromatic nitro compounds fueled by light

The selective enzymatic reduction of nitroaliphatic and nitroaromatic compounds to aliphatic amines and amino-, azoxy- and azo-aromatics, respectively, remains a persisting challenge for biocatalysis. Here we demonstrate the light-powered, selective photoenzymatic synthesis of aliphatic amines and amino-, azoxy- and azo-aromatics from the corresponding nitro compounds. The nitroreductase from Bacillus amyloliquefaciens, in synergy with a photocatalytic system based on chlorophyll, promotes selective conversions of electronically-diverse nitroarenes into a series of aromatic amino, azoxy and azo products with excellent yield (up to 97%). The exploitation of an alternative nitroreductase from Enterobacter cloacae enables the tailoring of a photoenzymatic system for the challenging synthesis of aliphatic amines from nitroalkenes and nitroalkanes (up to 90% yield). This photoenzymatic reduction overcomes the competing bio-Nef reaction, typically hindering the complete enzymatic reduction of nitroaliphatics. The results highlight the usefulness of nitroreductases to create selective photoenzymatic systems for the synthesis of precious chemicals, and the effectiveness of chlorophyll as an innocuous photocatalyst, enabling the use of sunlight to drive the photobiocatalytic reactions.

Novel and Facile Synthesis of Carbon Quantum Dots from Chicken Feathers and Their Application as a Photocatalyst to Degrade Methylene Blue Dye

Methylene blue (MB) is a most commonly used synthetic dye in the textile industry. It is an extremely carcinogenic phenothiazine derivative and therefore needs to be removed from the water bodies. In the present study, a single-step hydrothermal novel synthesis of carbon quantum dots (CQDs) extracted from biomass of chicken feathers has been performed, and the synthesized CQDs were applied to remove MB present in the aqueous samples. A number of techniques such as ultraviolet-visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD) were used to characterize the samples for the conformity purposes. SEM and XRD analysis showed that CQDs are highly crystalline and have spherical structures with an average particle diameter of 35 nm. In the presence of 0.2 g of synthesized CQDs, MB dye degraded drastically under the sunlight. The rate of degradation was studied by determining the absorbance of the degraded sample with time relevant to untreated sample. The % degradation achieved during first 60 min of time was approximately 92% which increased minimally to a value of only 95% after 100 min of time. The ease of synthesis of carbon dots at low cost contributes hugely to their utilizations as an efficient photocatalyst for the degradation of aqueous pollutants. The opted approach to synthesize CQDs is cost-effective and eco-friendly and demonstrates excellent potential to remove MB from the aqueous samples.

A Comprehensive Review on Adsorption, Photocatalytic and Chemical Degradation of Dyes and Nitro-Compounds over Different Kinds of Porous and Composite Materials

Dye and nitro-compound pollution has become a significant issue worldwide. The adsorption and degradation of dyes and nitro-compounds have recently become important areas of study. Different methods, such as precipitation, flocculation, ultra-filtration, ion exchange, coagulation, and electro-catalytic degradation have been adopted for the adsorption and degradation of these organic pollutants. Apart from these methods, adsorption, photocatalytic degradation, and chemical degradation are considered the most economical and efficient to control water pollution from dyes and nitro-compounds. In this review, different kinds of dyes and nitro-compounds, and their adverse effects on aquatic organisms and human beings, were summarized in depth. This review article covers the comprehensive analysis of the adsorption of dyes over different materials (porous polymer, carbon-based materials, clay-based materials, layer double hydroxides, metal-organic frameworks, and biosorbents). The mechanism and kinetics of dye adsorption were the central parts of this study. The structures of all the materials mentioned above were discussed, along with their main functional groups responsible for dye adsorption. Removal and degradation methods, such as adsorption, photocatalytic degradation, and chemical degradation of dyes and nitro-compounds were also the main aim of this review article, as well as the materials used for such degradation. The mechanisms of photocatalytic and chemical degradation were also explained comprehensively. Different factors responsible for adsorption, photocatalytic degradation, and chemical degradation were also highlighted. Advantages and disadvantages, as well as economic cost, were also discussed briefly. This review will be beneficial for the reader as it covers all aspects of dye adsorption and the degradation of dyes and nitro-compounds. Future aspects and shortcomings were also part of this review article. There are several review articles on all these topics, but such a comprehensive study has not been performed so far in the literature.

Synthesis of Ag nanoparticles by Celery leaves extract supported on magnetic biochar substrate, as a catalyst for the reduction reactions

Green synthesis of a noble metal such as Ag nanoparticles is an enormously developed research area. In this study, a biochar/Fe₃O₄–Ag magnetic nanocatalyst was produced via a green path by using Celery stalk as a carbon-based substrate and Celery leaf extract as reducing and stabilizing agents to construct Ag nanoparticles. The synthesized nanocatalyst was determined using various techniques, such as UV–Vis spectroscopy, FT-IR spectroscopy, XRD (X-ray diffraction), SEM/EDX spectroscopy (scanning electron microscopy/energy-dispersive X-ray), TEM (transmission electron microscopy), and VSM (vibrating sample magnetometer). To survey the catalytic action of the biochar/Fe₃O₄–Ag nanocatalyst, it was used in the reduction reaction of disparate nitroaromatics, aldehydes, and ketones. This catalyst has demonstrated good characteristics in terms of the amount, reusability, recoverability, activity, and structural integrity of the catalyst during the reaction. In addition, biochar/Fe₃O₄–Ag could be detached magnetically and recycled multiple times without significantly reducing its catalytic performance.

Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C–O coupling reaction in O-arylation of phenol

A new graphene oxide based heterogeneous catalytic system holding CuO nanoparticles through P and N donor sites for the C–O coupling reaction.

Chitosan-bodipy macromolecular fluorescent probes prepared by click reactions for highly sensitive and selective recognition of 2,4-dinitrophenylhydrazine

Chitosan-based probes were prepared and they could identify 2,4-dinitrophenylhydrazine (DNH). CC bonds formed in a click reaction act as recognizing sites for DNH.

Microwave-Assisted Synthesis of CuO Nanoparticles Using Cordia africana Lam. Leaf Extract for 4-Nitrophenol Reduction

Copper-oxide-based nanomaterials play an important role as a low-cost alternative to nanoparticles of precious metals for the catalytic reduction of 4-nitrophenols. In this study, CuO nanoparticles were synthesized by a microwave-assisted method using Cordia africana Lam. leaf extract for reduction or stabilization processes. The synthesized CuO nanoparticles (NPs) were characterized using X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The analysis indicated that nanocrystals of the monoclinic CuO phase having a cluster of agglomerated morphology with a crystallite size of about 9 nm were synthesized. We also evaluated the catalytic performance of CuO NPs against 4-nitrophenol (4-NP) reduction. The catalyst has shown excellent performance completing the reaction within 12 min. Furthermore, the performance of CuO NPs synthesized at different pH values was investigated, and results indicated that the one synthesized at pH 7 reduced 4-NP effectively in shorter minutes compared to those obtained at higher pH values. The CuO NPs synthesized using Cordia africana Lam. leaf extract exhibited a better reducing capacity with an activity parameter constant of 75.8 min−1·g−1. Thus, CuO synthesized using Cordia africana Lam. holds a potential application for the catalytic conversion of nitroarene compounds into aminoarene.

Efficient reduction of nitro compounds and domino preparation of 1-substituted-1H-1,2,3,4-tetrazoles by Pd(ii)-polysalophen coated magnetite NPs as a robust versatile nanocomposite

A new, versatile, and green methodology has been developed for the efficient NaBH4-reduction of nitroarenes as well as the domino/reduction MCR preparation of 1-substituted-1H-1,2,3,4-tetrazoles using Pd(ii)-polysalophen coated magnetite NPs as an efficient heterogeneous magnetically recyclable nanocatalyst. Polysalophen was firstly prepared based on a triazine framework with a high degree of polymerization, then coordinated to Pd ions and, finally, the resulting hybrid was immobilized on magnetite NPs. The catalyst was characterized by various instrumental and analytical methods, including GPC, DLS, N2 adsorption-desorption, TGA, VSM, TEM, HRTEM, EDX, XPS, XRD, and ICP analyses. The catalyst possesses dual-functionality including the reduction of nitroarenes and the construction of tetrazole rings all in one step via a domino protocol. High to excellent yields were obtained for both nitro reduction and the direct preparation of 1-substituted-1H-1,2,3,4-tetrazoles from nitro compounds. Insight into the mechanism was conducted by XPS in situ as well as DLS in situ along with several control experiments. Recyclability of the catalyst was studied for 6 consecutive runs along with metal leaching measurements in each cycle.

Ultralow Loading Ruthenium on Alumina Monoliths for Facile, Highly Recyclable Reduction of p-Nitrophenol

The pervasive use of toxic nitroaromatics in industrial processes and their prevalence in industrial effluent has motivated the development of remediation strategies, among which is their catalytic reduction to the less toxic and synthetically useful aniline derivatives. While this area of research has a rich history with innumerable examples of active catalysts, the majority of systems rely on expensive precious metals and are submicron- or even a few-nanometer-sized colloidal particles. Such systems provide invaluable academic insight but are unsuitable for practical application. Herein, we report the fabrication of catalysts based on ultralow loading of the semiprecious metal ruthenium on 2–4 mm diameter spherical alumina monoliths. Ruthenium loading is achieved by atomic layer deposition (ALD) and catalytic activity is benchmarked using the ubiquitous para-nitrophenol, NaBH4 aqueous reduction protocol. Recyclability testing points to a very robust catalyst system with intrinsic ease of handling.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Biorenewable carbon-supported Ru catalyst for N-alkylation of amines with alcohols and selective hydrogenation of nitroarenes

A renewable carbon-supported Ru catalyst (Ru/PNC-700) facilely prepared via simple impregnation followed by the pyrolysis process for N-alkylation of anilines with benzyl alcohol and chemoselective hydrogenation of nitroarenes.

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

Using a Nitrophenol Cocktail Screen to Improve Catalyst Down-selection

The catalytic reduction of 4-nitrophenol (4NP) with excess NaBH₄ is the benchmark model for quantifying catalytic activity of nanoparticles. Although broadly useful, the reaction can be very selective. This can lead to false positives and negatives when utilized for catalyst down-selection from a broader materials candidate pool. We report a multi-nitrophenol cocktail screening methodology incorporating 4NP and other amino-nitrophenols, utilizing Ag, Au, Pt, and Pd nanoparticles on carbon support. The reduction of the cocktail proceeds with no deleterious side reactions on the time-scale tested. The resulting kinetic rates provide an improved correlation of relative catalyst activity when compared to performance with other reducible moieties (e. g. azo bonds), or when compared to solely 4NP screening.