Recent progresses in the application of lignin derived (nano)catalysts in oxidation reactions

Hydrogenation of levulinic acid to γ-valerolactone over hydrophobic Ru@HCP catalysts

This study introduces an efficient strategy for promoting the synthesis of γ-valerolactone (GVL) via levulinic acid (LA) hydrogenation. A series of hyper-crosslinked porous polymer (HCP) supported Ru catalysts with different monomers were prepared. The wettabilities were controlled by the surface functional groups. The hydrophobic catalysts showed much higher activity than the hydrophilic ones in the hydrogenation of LA to GVL, highly possible due to the substrate enrichment. Further insight showed that the reaction proceeded through the 4-HVA route. These results illustrated the importance of surface wettability in bio-based molecule upgrading, which is beneficial for catalyst design.

Lignin-derived sulfonate base metal-free N, S co-doped carbon microspheres doped with different nitrogen sources as catalysts for oxygen reduction reactions

The oxygen reduction reaction (ORR) is an important step in the widespread application of metal-air batteries, so it is necessary to study and develop low-cost and efficient metal-free carbon-based catalysts to catalyze the ORR reaction. Heteroatomic doping, especially N and S co-doped carbon materials, has received much focus as a promising ORR catalyst. Meanwhile, the lignin material has high carbon content, wide source, and low price, and has wide application prospects for the preparation of carbon material catalysts. Here we report a hydrothermal‑carbonation preparation method for the synthesis of carbon microspheres by utilizing lignin derivatives as carbon precursors. And a variety of N, S co-doped carbon microsphere materials were prepared by adding different nitrogen sources (urea, melamine, NH₄Cl) to the microspheres. The N, S co-doped carbon microspheres (NSCMS-MLSN) catalysts achieved with NH₄Cl as the nitrogen source displayed superior RR catalytic activity with high half-wave potential (E_1/2 = 0.83 V vs. RHE) and current density (J_L = 4.78 mA cm^-2). This work provides some references on the method of preparing carbon materials co-doped with N and S and the choice of nitrogen sources.

Wood-Sourced Polymers as Support for Catalysis by Group 10 Transition Metals

Despite providing interesting solutions to reduce the number of synthetic steps, to decrease energy consumption or to generate less waste, therefore contributing to a more sustainable way of producing important chemicals, the expansion of the use of homogeneous catalysis in industrial processes is hampered by several drawbacks. One of the most important is the difficulty to recycle the noble metals generating potential high costs and pollution of the synthesized products by metal traces detrimental to their applications. Supporting the metals on abundant and cheap biosourced polymers has recently appeared as an almost ideal solution: They are much easier to recover from the reaction medium and usually maintain high catalytic activity. The present bibliographical review focuses on the development of catalysts based on group 10 transition metals (nickel, palladium, platinum) supported on biopolymers obtained from wood, such as cellulose, hemicellulose, lignin, and their derivatives. The applications of these catalysts in organic synthesis or depollution are also addressed in this review with examples of C-C couplings, oxidation, or hydrogenation reactions.

Support-Activity Relationship in Heterogeneous Catalysis for Biomass Valorization and Fine-Chemicals Production

Heterogeneous catalysts are progressively expanding their field of application, from high-throughput reactions for traditional industrial chemistry with production volumes reaching millions of tons per year, a sector in which they are key players, to more niche applications for the production of fine chemicals. These novel applications require a progressive utilization reduction of fossil feedstocks, in favor of renewable ones. Biomasses are the most accessible source of organic precursors, having as advantage their low cost and even distribution across the globe. Unfortunately, they are intrinsically inhomogeneous in nature and their efficient exploitation requires novel catalysts. In this process, an accurate design of the active phase performing the reaction is important; nevertheless, we are often neglecting the importance of the support in guaranteeing stable performances and improving catalytic activity. This review has the goal of gathering and highlighting the cases in which the supports (either derived or not from biomass wastes) share the worth of performing the catalysis with the active phase, for those reactions involving the synthesis of fine chemicals starting from biomasses as feedstocks.

Cleavage via Selective Catalytic Oxidation of Lignin or Lignin Model Compounds into Functional Chemicals

Lignin, a complex aromatic polymer with different types of methoxylated phenylpropanoid connections, enables the sustainable supply of value-added chemicals and biofuels through its use as a feedstock. Despite the development of numerous methodologies that upgrade lignin to high-value chemicals such as drugs and organic synthesis intermediates, the variety of valuable products obtained from lignin is still very limited, mainly delivering hydrocarbons and oxygenates. Using selective oxidation and activation cleavage of lignin, we can obtain value-added aromatics, including phenols, aldehydes, ketones, and carboxylic acid. However, biorefineries will demand a broad spectrum of fine chemicals in the future, not just simple chemicals like aldehydes and ketones containing simple C = O groups. In particular, most n-containing aromatics, which have found important applications in materials science, agro-chemistry, and medicinal chemistry, such as amide, aniline, and nitrogen heterocyclic compounds, are obtained through n-containing reagents mediating the oxidation cleavage in lignin. This tutorial review provides updates on recent advances in different classes of chemicals from the catalytic oxidation system in lignin depolymerization, which also introduces those functionalized products through a conventional synthesis method. A comparison with traditional synthetic strategies reveals the feasibility of the lignin model and real lignin utilization. Promising applications of functionalized compounds in synthetic transformation, drugs, dyes, and textiles are also discussed.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Technological advancement in the synthesis and applications of lignin-based nanoparticles derived from agro-industrial waste residues: A review

Over the years, lignin has drawn a great deal of interest for their potential use as bio-polymers due to the presence of high amount of phenolic compounds, non-polluting feature and cost-competitiveness as compared to synthetic polymers. However, in order to fast-track their development, different attempts are made towards the usage of lignin in nano form since it exhibits some unique properties in nanoscale range. The present review article provides a detail analysis on the recent advancement in the synthesis and applications of lignin nanoparticles (LNPs) derived from agro-industrial waste residues. In view of that, an in-depth morphological analysis was reviewed to assess the structural influence on the characteristics of LNPs. Further, application of LNPs is explored in different fields including bio-medical engineering, pharmaceuticals, skin-care products and food industries. Finally, the paper is concluded discussing various challenges associated with the synthesis, modification and development with an aspiration of futuristic developments. The readers of this review article will be highly benefitted after acquiring a comprehensive knowledge on LNPs and its different synthesis processes along with various applications.