Catalytic studies of cyclometalated gold(III) complexes and their related UiO-67 MOF

Cyclometalated (N,C) Au(III) Complexes: The Impact of Trans Effects on Their Synthesis, Structure, and Reactivity

ConspectusThe early years of gold catalysis were dominated by Au(I) complexes and inorganic Au(III) salts. Thanks to the development of chelating ligands, more sophisticated Au(III) complexes can now be easily prepared and handled. The choice of the ancillary ligand has great consequences for the synthesis, properties, and reactivity of the Au(III) complex in question. Among the major factors controlling reactivity are the "trans effect" and the "trans influence" that a ligand imparts at the ligand trans to itself. The kinetic trans effect manifests itself with an increased labilization of the ligand trans to a given ligand and arises from an interplay between ground-state and transition-state effects. The term trans influence, on the other hand, is a ground-state effect only, describing the tendency of a given ligand to weaken the metal-ligand bond trans to itself. Herein, we will use the term "trans effect" to describe both the kinetic and the thermodynamic properties, whereas the term "trans influence" will refer only to thermodynamic properties. We will describe how these trans effects strongly impact the chemistry of the commonly encountered cyclometalated (N,C) Au(III) complexes, a class of complexes we have studied for more than a decade. We found that the outcome of reactions like alkylation, arylation, and alkynylation as well as halide metathesis are dictated by the different trans influence of the two termini of the chelating tpy ligand in (tpy)Au(OAcF)2 (tpy = 2-(p-tolyl)pyridine, OAcF = OCOCF3, tpy-C > tpy-N). There is a strong preference for high trans influence ligands to end up trans to tpy-N, whereas the lower trans influence ligands end up trans to tpy-C. Taking advantage of these preferences, tailor-made (N,C)Au(III) complexes could be prepared. For the functionalization of alkenes at (tpy)Au(OAcF)2, the higher trans effect of tpy-C would suggest that the coordination site trans to tpy-C would be kinetically more available than the one trans to tpy-N. However, due to the thermodynamic preference of having the σ-bonded ligand, resulting from the nucleophilic addition to alkenes, trans to tpy-N, functionalization of alkenes was only observed trans to tpy-N. However, for a catalytic process, the reaction should happen trans to tpy-C, as was observed for the trifluoroacetoxylation of acetylene. When functionalizing acetylene in the coordination site trans to tpy-N, protolytic cleavage of the Au-C(vinyl) bond to release the product did not occur at all, whereas trans to tpy-C protolytic cleavage of the Au-C(vinyl) bond occurred readily, in agreement with the higher trans influence of tpy-C over tpy-N. The large impact of the trans effects in Au(III) complexes is finally exemplified with the synthesis of [(tpy)Au(π-allyl)]+[NTf2]-, which resulted in a highly asymmetric π + σ bonding of the allyl moiety. Here, the bonding is such that the most thermodynamically favorable situation is achieved, with the carbon trans to tpy-N bonded in a σ-fashion and the π-allyl double bond being coordinated trans to tpy-C.

Porous Metal-Organic Frameworks for Light Hydrocarbon Separation

The separation of light hydrocarbon compounds is an important process in the chemical industry. Currently, its separation methods mainly include distillation, membrane separation, and physical adsorption. However, these traditional methods or materials have some drawbacks and disadvantages, such as expensive equipment costs and high energy consumption, poor selectivity, low separation ratios, and separation efficiencies. Therefore, it is important to develop novel separation materials for light hydrocarbon separation. As a new type of organic-inorganic hybrid crystalline material, metal-organic frameworks (MOFs) are promising materials for light hydrocarbon separation due to their designability of structure and easy modulation of function. This review provides an overview of recent advances in the design, synthesis, and application of MOFs for light hydrocarbon separation in recent years, with a focus on the separation of alkane, alkene, and alkyne. We discuss strategies for improving the adsorption selectivity and capacity of MOFs, including pore size limitation, physical adsorption, and chemisorption. In addition, we discuss the advantages/disadvantages, challenges, and prospects of MOFs in the separation of light hydrocarbon.

A Conformationally Restricted Gold(III) Complex Elicits Antiproliferative Activity in Cancer Cells

Diamine ligands are effective structural scaffolds for tuning the reactivity of transition-metal complexes for catalytic, materials, and phosphorescent applications and have been leveraged for biological use. In this work, we report the synthesis and characterization of a novel class of cyclometalated [C^N] Au(III) complexes bearing secondary diamines including a norbornane backbone, (2R,3S)-N2,N3-dibenzylbicyclo[2.2.1]heptane-2,3-diamine, or a cyclohexane backbone, (1R,2R)-N1,N2-dibenzylcyclohexane-1,2-diamine. X-ray crystallography confirms the square-planar geometry and chirality at nitrogen. The electronic character of the conformationally restricted norbornane backbone influences the electrochemical behavior with redox potentials of -0.8 to -1.1 V, atypical for Au(III) complexes. These compounds demonstrate promising anticancer activity, particularly, complex 1, which bears a benzylpyridine organogold framework, and supported by the bicyclic conformationally restricted diaminonorbornane, shows good potency in A2780 cells. We further show that a cellular response to 1 evokes reactive oxygen species (ROS) production and does not induce mitochondrial dysfunction. This class of complexes provides significant stability and reactivity for different applications in protein modification, catalysis, and therapeutics.

Au(III) Cyclometallated Compounds with 2-Arylpyridines and Their Derivatives or Analogues: 34 Years (1989–2022) of NMR and Single Crystal X-ray Studies

A review paper on Au(III) cyclometallated compounds with 2-arylpyridines (2-phenylpyridine, 2-benzylpyridine, 2-benzoylpyridine, 2-phenoxypyridine, 2-phenylsulfanylpyridine, 2-anilinopyridine, 2-(naphth-2-yl)pyridine, 2-(9,9-dialkylfluoren-2-yl)pyridines, 2-(dibenzofuran-4-yl)pyridine, and their derivatives) and their analogues (2-arylquinolines, 1- and 3-arylisoquinolines, 7,8-benzoquinoline), with 113 references. A total of 554 species, containing κ2-N(1),C(6′)*-Au(III), or analogous moiety (i.e., chelated by nitrogen of the pyridine-like ring and the deprotonated ortho- carbon of the phenyl-like ring) and, thus, possessing a character intermediate between metal complexes and organometallics, studied in the years 1989–2022 by NMR spectroscopy and/or single crystal X-ray diffraction (207 X-ray structures), are described. The compounds for which biological or catalytic activity and the luminescence properties were studied are also quoted.

Synthesis of substituted (N,C) and (N,C,C) Au(III) complexes: the influence of sterics and electronics on cyclometalation reactions

Cyclometalated Au(III) complexes are of interest due to their catalytic, medicinal, and photophysical properties. Herein, we describe the synthesis of derivatives of the type (N,C)Au(OAc^F)₂ (OAc^F = trifluoroacetate) and (N,C,C)AuOAc^F by a cyclometalation route, where (N,C) and (N,C,C) are chelating 2-arylpyridine ligands. The scope of the synthesis is explored by substituting the 2-arylpyridine core with electron donor or acceptor substituents at one or both rings. Notably, a variety of functionalized Au(III) complexes can be obtained in one step from the corresponding ligand and Au(OAc)₃, eliminating the need for organomercury intermediates, which is commonly reported for similar syntheses. The influence of substituents in the ligand backbone on the resulting complexes was assessed using DFT calculations, ¹⁵N NMR spectroscopy and single-crystal X-ray diffraction analysis. A correlation between the electronic properties of the (N,C) ligands and their ability to undergo cyclometalation was found from experimental studies combined with natural charge analysis, suggesting the cyclometalation at Au(III) to take place via an electrophilic aromatic substitution-type mechanism. The formation of Au(III) pincer complexes from tridentate (N,C,C) ligands was investigated by synthesis and DFT calculations, in order to assess the feasibility of C(sp³)-H bond activation as a synthetic pathway to (N,C,C) cyclometalated Au(III) complexes. It was found that C(sp³)-H bond activation is feasible for ligands containing different alkyl groups (isopropyl and ethyl), although the C-H activation is less energetically favored compared to a ligand containing tert-butyl groups.

Tunable Gold-catalyzed Reactions of Propargyl Alcohols and Aryl Nucleophiles

Gold‐catalyzed transformations of 1,3‐diarylpropargyl alcohols and various aryl nucleophiles were studied. Selective tunable synthetic methods were developed for 1,1,3‐triarylallenes, diaryl‐indenes and tetraaryl‐allyl target products by C3 nucleophilic substitution and subsequent intra‐ or intermolecular hydroarylation, respectively. The reactions were scoped with regards to gold(I)/(III) catalysts, solvent, temperature, and electronic and steric effects of both the diarylpropargyl alcohol and the aryl nucleophiles. High yields of triaryl‐allenes and diaryl‐indenes by gold(III) catalysis were observed. Depending on the choice of aryl nucleophile and control of reaction temperature, different product ratios have been obtained. Alternatively, tetraaryl‐allyl target products were formed by a sequential one‐pot tandem process from appropriate propargyl substrates and two different aryl nucleophiles. Corresponding halo‐arylation products (I and Br; up to 95 % 2‐halo‐diaryl‐indenes) were obtained in a one‐pot manner in the presence of the respective N‐halosuccinimides (NIS, NBS).

Crystal structure of (N^C) cyclo-metalated AuIII diazide at 100 K

The title compound, an (N^C)-cyclo-metalated gold(III) diazide, namely, di-azido-[5-eth-oxy-carbonyl-2-(5-eth-oxy-carbonyl-pyridin-2-yl)phenyl-κ2 C 1,N]gold(III), [Au(C17H16NO4)(N3)2] or Au(ppyEt)(N3)2, was synthesized by reacting Au(ppyEt)Cl2 with NaN3 in water for 24 h. The complex has been structurally characterized and features a gold center with a square-planar environment. The Au-N(azide) bond lengths are significantly different depending on the influence of the atom trans to the azide group [Au-N(trans to C) of 2.067 (2) Å versus Au-N(trans to N) of 2.042 (2) Å]. The azide groups are twisted in-and-out of plane by 56.2 (2)°.