Different transfer hydrogenation pathways of halogenated nitrobenzenes catalyzed by Fe-, Co- or Ni-based species confined in nitrogen doped carbon

Selective hydrogenation of vanillin over a graphene-encapsulated nitrogen-doped bimetallic magnetic Ni/Fe@NDC nano-catalyst

One of the main obstacles to the development of sustainable biomass feedstocks today is the research of selective hydrogenation of biomass platform compounds for the synthesis of high-value chemicals. This work reports on the synthesis of a Ni/Fe bimetallic catalyst with nitrogen-doped carbon serving as the carrier, hydrogen serving as the primary donor, and isopropanol serving as the reaction medium and serving as a secondary donor. Vanillin was catalytically hydrogenated to produce 4-methylguaiacol, a complete hydrogenation product, under a reaction temperature of 200 °C for four hours. A single product with a good yield (95.26% conversion and selectivity up to 99%) was achieved by the moderate conditions, offering a potential route for the catalytic hydrogenation of biomass platform compounds.

Magnetic nitrogen-doped activated carbon improved biohydrogen production

Low biological hydrogen (bioH2) production due to non-optimal metabolic pathways occurs frequently. In this work, magnetic nitrogen-doped activated carbon (MNAC) was prepared and added into the inoculated sludge with glucose as substrate to enhance hydrogen (H2) yield by mesophilic dark fermentation (DF). The highest H2 yield appeared in 400 mg/L AC (252.8 mL/g glucose) and 600 mg/L MNAC group (304.8 mL/g glucose), which were 26.02% and 51.94% higher than that of 0 mg/L MNAC group (200.6 mL/g glucose). The addition of MNAC allowed for efficient enrichment of Firmicutes and Clostridium-sensu-stricto-1, accelerating the metabolic pathway shifted towards butyrate type. The Fe ions released by MNAC facilitated electron transfer and favored the reduction of ferredoxin (Fd), thereby obtaining more bioH2. Finally, the generation of [Fe-Fe] hydrogenase and cellular components of H2-producing microbes (HPM) during homeostasis was discussed to understand on the use of MNAC in DF system.

Insights into enhanced peroxydisulfate activation with S doped Fe@C catalyst for the rapid degradation of organic pollutants

In this study, the S modified iron-based catalyst (S-Fe@C) for activating peroxydisulfate (PDS) was fabricated by heating the S-MIL-101 (Fe) precursor at 800 °C. The resulted S-Fe@C composite mainly consisted of carbon, Fe⁰, FeS, FeS₂, and Fe₃O₄, and showed strong magnetism. Compared with Fe@C obtained from MIL-101 (Fe), the S-Fe@C exhibited much higher performance (1.5 times larger) on PDS activation and the S-Fe@C/PDS could rapidly degrade various organic pollutants in 5 min under the attack of the species of SO₄^-·, ¹O₂, electro-transfer and Fe(IV). The S element in enhancing the PDS activation mainly involved two mechanisms. Firstly, the doped S could speed up the electron transfer efficiency, resulting in a promotion on PDS decomposition; secondly, the S^2- S₂^2- or S⁰ could achieve the circulation of Fe²⁺ and Fe³⁺, leading to the formation of non-radicals Fe(IV) and ¹O₂.

Pre-Coking Strategy Strengthening Stability Performance of Supported Nickel Catalysts in Chloronitrobenzene Hydrogenation

Supported nickel catalysts represent a class of important catalytic materials in selective hydrogenations, but applications are frequently limited by metal agglomeration or active-site blocking induced by the presence of hydrogen halides. Herein, we report a novel pre-coking strategy, exposing the nickel nanoparticles under methane dry reforming conditions to manipulate performance in the continuous-flow hydrogenation of 1,2-dichloro-4-nitrobenzene. Compared with the pristine nickel catalyst, the nanotube-like coke-modified nickel catalyst showed weakened hydrogenating ability, but much improved stability and slightly better selectivity to the target product, 3,4-dichloroaniline. Characterization results revealed that the strengthened stability performance can be mainly linked to the reduced propensity to retain chlorine species, which seems to block the access of the substrate molecules to the active sites, and thus is a major cause of catalyst deactivation on the pristine nickel catalyst. Coke deposition can occur on the pre-coked nickel catalyst but not on the pristine analog; however, the impact on the stability performance is much milder compared with that on chlorine uptake. In addition, the presence of coke is also beneficial in restraining the growth of the nickel nanoparticles. Generally, the developed method might provide an alternative perspective on the design of novel transition-metal-based catalytic materials for other hydrogenation applications under harsh conditions.