High dispersed Pd supported on CeO2 (1 0 0) for CO oxidation at low temperature

MOF-Derived ZrO2-Supported Bimetallic Pd-Ni Catalyst for Selective Hydrogenation of 1,3-Butadiene

A series of MOF-derived ZrO2-supported Pd-Ni bimetallic catalysts (PdNi/UiO-67-CTAB(n)-A500) were prepared by co-impregnation and pyrolysis at 500 °C under air atmosphere using UiO-67-CTAB(n) (CTAB: cetyltrimethylammonium bromide; n: the concentration of CTAB; n = 0, 3, 8, 13, 18) as a sacrificial template. The catalytic activity of PdNi/UiO-66-CTAB(n)-A500 in 1,3-butadiene hydrogenation was found to be dependent on the crystal morphology of the UiO-67 template. The highest activity was observed over the PdNi/UiO-67-CTAB(3)-A500 catalyst which was synthesized using UiO-67-CTAB(3) with uniform octahedral morphology as the template for the 1,3-butadiene selective hydrogenation. The 1,3-butadiene conversion and total butene selectivity were 98.4% and 44.8% at 40 °C within 1 h for the PdNi/UiO-67-CTAB(3)-A500 catalyst, respectively. The catalyst of PdNi/UiO-67-CTAB(3)-A500 can be regenerated in flowing N2 at 200 °C. Carbon deposited on the surface of the catalyst was the main reason for its deactivation. This work is valuable for the high-efficiency bimetallic catalyst's development on the selective hydrogenation of 1,3-butadiene.

Fabricating Uniform TiO2-CeO2 Solid Solution Supported Pd Catalysts by an In Situ Capture Strategy for Low-Temperature CO Oxidation

Support properties regulation has been a feasible method for the improvement of noble metal catalytic performance. For Pd-based catalysts, TiO₂-CeO₂ material has been widely used as an important support. However, due to the considerable discrepancy in the solubility product constant between titanium and cerium hydroxides, it is still challenging to synthesize a uniform TiO₂-CeO₂ solid solution in the catalysts. Herein, an in situ capture strategy was constructed to fabricate a uniform TiO₂-CeO₂ solid solution as supports for an enhanced Pd-based catalyst. The obtained Pd/TiO₂-CeO₂-iC catalyst possessed enriched reactive oxygen species and optimized CO adsorption capability, manifesting a superior CO oxidation activity (T₁₀₀ = 70 °C) and stability (over 170 h). We believe this work provides a viable strategy for precise characteristic modulation of composite oxide supports during the fabrication of advanced noble metal-based catalysts.

Highly Dispersed Pd Species Supported on CeO2 Catalyst for Lean Methane Combustion: The Effect of the Occurrence State of Surface Pd Species on the Catalytic Activity

The correlation between the occurrence state of surface Pd species of Pd/CeO2 for lean CH4 combustion is investigated. Herein, by using a reduction-deposition method, we have synthesized a highly active 0.5% PdO/CeO2-RE catalyst, in which the Pd nanoparticles are evenly dispersed on the CeO2 nanorods CeO2-R. Based on comprehensive characterization, we have revealed that the uniformly dispersed Pd nanoparticles with a particle size distribution of 2.3 ± 0.6 nm are responsible for the generation of PdO and PdxCe1−xO2−δ phase with –Pd2+–O2−–Ce4+– linkage, which can easily provide oxygen vacancies and facilitate the transfer of reactive oxygen species between the CeO2-R and Pd species. As a consequence, the remarkable catalytic activity of 0.5% Pd/CeO2-RE is related to the high concentration of PdO species on the surface of the catalyst and the synergistic interaction between the Pd species and the CeO2 nanorod.